5,838
edits
m (→Davis family specific:: Showing Cum 1 clearer) |
m (→Introduced for problems with Fine Offset family:: Updated for recent changes to MX) |
||
Line 543: | Line 543: | ||
|- | |- | ||
|RestartIfUnplugged=0 | |RestartIfUnplugged=0 | ||
|This is set in the settings frame on the Station settings screen off the configuration menu. | |{{Version badge 1}}This is set in the settings frame on the Station settings screen off the configuration menu. | ||
*0 = Disabled, default i.e. deselected on the Station Configuration Screen | *0 = Disabled, default i.e. deselected on the Station Configuration Screen | ||
*1 = Enabled, Cumulus will restart if it detects that a Fine Offset station is unplugged. '''Note:''' Unless the station has been manually plugged in again, a Cumulus restart has no benefit; normally the station should be checked to be plugged in before Cumulus is ever started and the station then left plugged in. | *1 = Enabled, Cumulus will restart if it detects that a Fine Offset station is unplugged. '''Note:''' Unless the station has been manually plugged in again, a Cumulus restart has no benefit; normally the station should be checked to be plugged in before Cumulus is ever started and the station then left plugged in. | ||
Line 588: | Line 588: | ||
Got a pressure problem with a Fine Offset station when the pressure 'offset' that Cumulus reads is garbage, so Cumulus just uses zero? | Got a pressure problem with a Fine Offset station when the pressure 'offset' that Cumulus reads is garbage, so Cumulus just uses zero? | ||
Tell Cumulus | Tell Cumulus what offset to use, by using an external text editor to insert this parameter where x.y is your pressure offset in in mb or hPa [i.e. your station (absolute) pressure subtracted from the sea-level (relative) pressure]. | ||
|} | |} |
edits