|
|-
|Port=0
|
|Com port in your computer which is connected to your weather station if connected via a serial port. Defaults to port 0.
|-
|Latitude=0
|-
|Humidity98Fix=0
|
|Selected in the Station Configuration Screen Settings block.
*0 = Disabled (default)
*1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98% or greater. Normally only useful for Oregon Scientific stations.
|-
|Wind10MinAverage=0
|
|Selected in the Station Configuration Screen Settings block.
*0 = Disabled (default)
*1 = Enabled, Cumulus will calculate and display a 10-minute average wind speed instead of using the value supplied by the station.
|-
|CalculatedDP=0
|
|Selected in the Station Configuration Screen Settings block.
*0 = Disabled
*1 = Enabled, Cumulus will calculate the dew point instead of using the value supplied by the station. This avoids the restriction in the Oregon Scientific stations where the dew point can never be below freezing point.
|-
|CalculatedWC=0
|
|Selected in the Station Configuration Screen Settings block.
*0 = Disabled
*1 = Enabled, Cumulus will calculate the wind chill instead of using the value supplied by the station. Note that some stations (Fine Offset, for example, do not supply a wind chill value anyway, so Cumulus always calculates it). You should set this if you have specified any calibration values for wind or temperature, so that Cumulus can also apply those values to the wind chill.
|-
|RolloverHour=0
|-
|CloudBaseInFeet=1
|
|Cloud base measurement unit
*0 = meters
*1 = feet (default)
|-
|[Web Site]
|-
|Host=
|
|This is the name (or the IP address) of the ftp server which you connect to when you upload pages to your web site
|-
|Port=21
|
|Port used for FTP upload, default =21
|-
|Username=
|-
|Password=
|your web site FTP login password as entered in the Internet Configuration Screen (note: this is not encrypted)
|-
|Directory=
|
|Directory (including path)on your server to which FTP will upload the files
|-
|AutoUpdate=0
|
|Set in the Internet Configuration Screen Web Settings block.
*0 = Disabled
*1 = Enabled, Cumulus will automatically upload your updated web pages to your web site at regular intervals (as specified by the 'Update Interval')
|-
|ActiveFTP=0
|
|Set in the Internet Configuration Screen Web Settings block.
*0 = Disabled
*1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
|-
|EnableRealtime=0
|
|Set in the Internet Configuration Screen Web Settings block.
*0 = Disabled
*1 = Enabled, Cumulus will upload a file called realtime.txt to your web site, at the interval specified by Realtime Interval (see below). This file contains various weather parameters and is used by the CumulusRealtime.swf real time wind gauges (as on the supplied 'gauges' web page. If you don't have this option selected, but do have the 'auto update' option set (and a suitable interval configured), Cumulus will still create the realtime.txt file at the specified Interval (not the Realtime Interval) so that you can specify it as an extra file to upload during the 'normal' upload, or use it for any other purpose on your PC.
|-
|RealtimeInterval=3000
|
|Set in the Internet Configuration Screen Web Settings block. The time in seconds between uploads of the realtime.txt file.
|-
|UpdateInterval=15
|
|Set in the Internet Configuration Screen Web Settings block. The interval in minutes at which you wish auto updates to occur.
|-
|IncludeSTD=1
|
|Selected in the Internet Configuration Files Tab screen
*0 = Disabled
*1 = Enabled, (default) the standard web files provided with Cumulus will be processed and uploaded at each web update.
|-
|IncludeSTDImages=1
|
|Selected in the Internet Configuration Files Tab screen
*0 = Disabled
*1 = Enabled,(default) the standard image files generated by Cumulus (graphs, etc) will be uploaded at each web update.
|-
|FTPRename=0
|
|Selected in the Internet Configuration Files Tab screen
*0 = Disabled
*1 = Enabled,
|-
|DeleteBeforeUpload=0
|
|Selected n Internet Configuration Screen Sites/Options tab Web Settings block
*0 = Disabled default
*1 = Enabled, files are deleted from sever before the new update is loaded
|-
|ResizeGraphs=0
|
|Selected in the Internet Congfiuration Screen Web graphs block.
*0 = Disabled (default) Cumulus uploads the default 750 x 300 pixel graphs.
*1 = Cumulus resizes the large graph images when creating them for upload to your web site. Specify the required height and width in the corresponding boxes. Note that the images are simply scaled to the new size; there will be some loss of quality
|-
|GraphHeight=300
|-
|ImageFolder=
|
|Path and file name of folder to which the image files are copied at each web update interval, either the 'normal' interval, or the 'realtime' interval, depending on whether or not the 'realtime?' box is ticked.
|-
|ImageCopyRealtime=0
|
|Selected in the Internet Configuration File tab screen
*0 = files copied in 'normal' interval each web update (default)
*1 = files copied in 'real time' interval.
|-
|ExtraLocal0=
|
|Path and file name on local computer for alternate file #0. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote0=
|
|Path and file name on web server for alternate file #0. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess0=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that.
|-
|ExtraBinary0=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime0=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP0=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal1=
|
|Path and file name on local computer for alternate file #1. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote1=
|
|Path and file name on web server for alternate file #1. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess1=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary1=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime1=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP1=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal2=
|
|Path and file name on local computer for alternate file #2. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote2=
|
|Path and file name on web server for alternate file #2. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess2=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary2=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime2=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP2=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal3=
|
|Path and file name on local computer for alternate file #3. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote3=
|
|Path and file name on web server for alternate file #3. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess3=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary3=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime3=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP3=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal4=
|
|Path and file name on local computer for alternate file #4. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote4=
|
|Path and file name on web server for alternate file #4. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess4=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary4=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime4=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP4=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal5=
|
|Path and file name on local computer for alternate file #5. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote5=
|
|Path and file name on web server for alternate file #5. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess5=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary5=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime5=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP5=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal6=
|
|Path and file name on local computer for alternate file #6. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote6=
|
|Path and file name on web server for alternate file #6. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess6=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary6=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime6=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP6=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal7=
|
|Path and file name on local computer for alternate file #7. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote7=
|
|Path and file name on web server for alternate file #7. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess7=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary7=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime7=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP7=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal8=
|
|Path and file name on local computer for alternate file #8. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote8=
|
|Path and file name on web server for alternate file #8. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess8=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary8=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime8=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP8=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|ExtraLocal9=
|
|Path and file name on local computer for alternate file #9. Set in Internet Configuration Screen Files tab.
|-
|ExtraRemote9=
|
|Path and file name on web server for alternate file #9. Set in Internet Configuration Screen Files tab.
|-
|ExtraProcess9=0
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, (default) file will not pass through the cumulus 'tag processor'.
*1 = Enabled, file will be passed through the 'tag processor' in Cumulus, in the same way that the standard Cumulus web pages are. This allows to you to create your own web pages into which Cumulus will insert the various weather parameters. See the "Web tags" section of the help file for a list of the tags which you can use. Cumulus will create a temporary file to hold the processed version of your file and then upload that
|-
|ExtraBinary9=0
|
|Set in Internet Configuration Screen Files tab.
*0 = not binary (e.g. HTML file)
*1 = Binary (e.g. images)
|-
|ExtraRealtime9=0
|
|Set in Internet Configuration Screen Files tab. If you select this for any files, you will also need to select the Realtime option.
*0 = Disabled, (default) file uploaded as part of normal upload
*1 = Enabled, file uploaded during Realtime upload
|-
|ExtraFTP9=1
|
|Set in Internet Configuration Screen Files tab.
*0 = Disabled, File copied to the location specified in the Remote Filename box.
*1 = Enabled, (default) File uploaded by FTP
|-
|[Display]
|
|Section heading - the following parameters affect the way things are displayed.
|-
|Heading=My Weather
|
|Title Heading on the Main Screen. Set in the Display Configuration Screen General block
|-
|MinimizeToTray=0
|
|Set in the Display Configuration Screen General block
*0 = Disabled (default)
*1 = Enabled, causes Cumulus to appear as an icon in the system tray when it is minimized. The icon will flash if a record is broken or an error occurs. Double click on the icon to restore the main window (or right click on the icon and use the pop-up menu).
|-
|ForecastCentred=0
|
|Set in the Display Configuration Screen General block.
*0 = Disabled, (default) Forecast appears left justified on main screen
*1 = Enabled, Forecast appears centred on main screen
|-
|FontColour=4227327
|
|Decimal code for the screen font color
|-
|BackColour=12632256
|
|Decimal code for the application background color
|-
|HeadingColour=10485760
|
|Decimal code for the screen heading color
|-
|ClockColour=-16777201
|
|Decimal code for the main screen clock background color (
|-
|DisplaySolarData=0
|
|Set in the Display Configuration Screen General block.
*0 = Disabled (default)
*1 = causes Vantage Pro solar data (ET, UV and Solar radiation) to be displayed on the main screen (if supported by the station), or extra sensor data in the case of Oregon WMR-928 stations.
|-
|DisplayCloudBase=0
|
|Set in the Display Configuration Screen General block.
*0 = Disabled, (default)
*1 = Enabled, the calculated cloud base is displayed on the main screen. The calculation is a simple one; 1000 feet for every 4.5 degrees Fahrenheit difference between the temperature and the dew point.
|-
|TwelveHourClock=0
|-
|WMR928Channel1Caption=Extra channel 1
|
|Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
|-
|WMR928Channel2Caption=Extra channel 2
|
|Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
|-
|WMR928Channel3Caption=Extra channel 3
|
|Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
|-
|WindGaugeRange=50
|
|Sets the default full scale deflection of the wind speed gauge
|-
|SnowUnitText=cm
|
|Snow measurement unit. Default is cm
|-
|DisplayHumidex=0
|
|Set in the Display Configuration Screen General block
*0 = Disabled (default) Heat Index displayed on main screen.
*1 = Enabled, calculated Humidex value to be displayed on the main screen instead of Heat Index. Note that Cumulus displays degrees C or F for Humidex, whereas strictly speaking it is unitless. This is for the convenience of those who use Fahrenheit but would still prefer to see Humidex displayed, where it might be confusing to show the unconverted value.
|-
|[Wunderground]
|
|Section Name - Parameters for your Weather Underground site
|-
|ID=
|
|Your Weather Underground station identifier (note: not your user name).
|-
|Password=
|
|Your Weather Underground password. (note: not encrypted)
|-
|Enabled=0
|
|Set if you wish to upload to your Weather Underground site
*0 = Disabled, (default) no Weather underground site
*1 = Enabled, data sent at the interval specified below
|-
|RapidFire=0
|
|'rapid fire' mode.
*0 = Disabled (default)
*1 = Enabled, You should also tick 'Enabled'. Rapid fire updates occur every 5 seconds.
|-
|Interval=15
|
|Time in minutes between uploads to Weather Underground. (default = 15)
|-
|SendUV=0
|
|Current UV value
*0 = Disabled (default) no UV info sent
*1 = Enabled, UV value sent with the data
|-
|SendSR=0
|
|Solar Radiation
*0 = Disabled (default) no solar data sent
*1 = Enabled, Solar Radiation value sent with data
|-
|[Twitter]
|-
|Interval=10
|
|interval in minutes that Tweats will be sent.
|-
|[PWSweather]
|-
|ID=
|
|Your PWS Weather station identifier (note: not your user name)
|-
|Password=
|-
|Interval=15
|
|Interval in minutes that updates will be sent to your PWS weather site
|-
|SendUV=0
|