5,838
edits
m (→Other weather station/instrument specific:: WMR928TempChannel=N entry - add need to insert line into file) |
m (→Other weather station/instrument specific:: 'LogExtraSensors' tidied) |
||
Line 455: | Line 455: | ||
|LogExtraSensors=0 | |LogExtraSensors=0 | ||
|This is set in the settings frame on the Station settings screen off the configuration menu. | |This is set in the settings frame on the Station settings screen off the configuration menu. | ||
*0=Disabled (default) | |||
*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors. | |||
(Note this attribute appears under [[#Davis_family_specific|Davis]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset]] tables above with different usage explanations). | |||
|- | |- | ||
|WMR928TempChannel=N | |WMR928TempChannel=N | ||
|This line needs to be added in the [Station] section of the Cumulus.ini. For | |This line needs to be added in the [Station] section of the Cumulus.ini. For WMR-928 stations (and other stations using the same protocol, eg WMR-968) to use an 'extra' channel (see previous parameter) as your main temperature sensor, set N to the required channel | ||
|- | |- | ||
|WS2300Sync=1 | |WS2300Sync=1 |
edits