Cumulus Wiki

Cumulus.ini (preserving history): Difference between revisions

Cumulus.ini (preserving history) (view source)

Revision as of 06:24, 17 May 2021

327 bytes removed ,  06:24, 17 May 2021
m
→‎WM918/WMR928 Settings
Line 289: Line 289:
!style="width:300px" | Description
!style="width:300px" | Description
|-  
|-  
|style="background:lightgray;"|[Station]  
|style="background:lightgray;"|[Station]
|
|
|style="background:lightgray;"|Section name - the following parameters relate to the station configuration.
|style="background:lightgray;"|Section name - the following parameters relate to the station configuration.
|-
|-
|Humidity98Fix=0  
|Humidity98Fix=0  
|
|0 (disable)
|Applies to weather station types that never report more than 98% relative humidity.
|Applies to weather station types that never report more than 98% relative humidity.
*0 = Disabled (default)
*0 = Disabled (default)
*1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98% or greater.  Normally only useful for Oregon Scientific stations.
*1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98%.  Normally only useful for Oregon Scientific stations.
|-
|-
|LogExtraSensors=0
|LogExtraSensors=0
|
|0 (disable)
|This setting determines whether MX looks for readings from extra temperature probes etc.  
|This setting determines whether MX looks for readings from extra temperature probes etc.  
*0=Disabled (default)
*0=Disabled (default)
*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors.
*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors..
(Note this attribute appears in [[#Davis_family_specific|Davis family]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset family]] tables above and in [[#Instromet_station_specific:|Instromet station specific:]] table below with different usage explanations).
|-
|colspan="2" style="background:pink;"|Read-only parameters - how to set depends on your MX release.
|-
|-
|WMR928TempChannel=N
|WMR928TempChannel=N
|
|(no default)
|for WMR-928 stations (and other serial stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
|for WMR-928 stations (and other serial stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
|-
|-
|WMR200TempChannel=N
|WMR200TempChannel=N
|
(no default)
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
|}
|}


====EasyWeather File Settings====
====EasyWeather File Settings====
Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/8901"