Cumulus.ini (preserving history): Difference between revisions

Cumulus.ini (preserving history) (view source)

177 bytes added , 16:32, 3 August 2020

m

5,838

edits

@@ Line 1,371: / Line 1,371: @@
 |style="background:lightgray;"|[Offsets]
 |style="background:lightgray;"|Section Name - the following 'attribute=value' parameters are the adjustment factors for your specific sensors
+|-
+|colspan="2" style="background:pink;"|Read-only parameters - The parameter listed below must be entered directly into file with Cumulus stopped. Used in both C1 and MX.
+|-
+|TempMult2=0.0
+|This line needs to be added in the [Offsets] section of the Cumulus.ini, if it is omitted default multiplier is 0.0.
+"Second order" multiplier by which measured outdoor Temperature is to be corrected, this means that the logged reading can be (TempMult2 X measured-temp X measured_temp) + (TempMult X measured_temp) + TempOffset
 |-
 |colspan="3" style="background:lightblue;"| Both Cumulus flavours
@@ Line 1,379: / Line 1,385: @@
 |TempMult=1
 |First order multiplier by which measured outdoor Temperature is to be corrected (default=1).
-For formula see next item.
+For formula see read-only item.
-|-
-|TempMult2=0.0
-|This line needs to be added in the [Offsets] section of the Cumulus.ini, if it is omitted default multiplier is 0.0.
-"Second order" multiplier by which measured outdoor Temperature is to be corrected, this means that the logged reading can be (TempMult2 X measured-temp X measured_temp) + (TempMult X measured_temp) + TempOffset
 |-
 |HumMult=1