Cumulus.ini (preserving history): Difference between revisions

Cumulus.ini (preserving history) (view source)

534 bytes added , 11:27, 27 July 2020

m

5,838

edits

@@ Line 767: / Line 767: @@
 N must be a positive integer. For example set N to '60'; it represents the number of realtime ftp uploads between disconnections - so 60 would give an hour if 1 minute realtime interval selected.
 |-
-|Logging=1
+|DataLogging=0
-|This parameter (attribute=value) determines if when you next start Cumulus it will send enhanced information to the [[debug]] file. Set it to 1  to enable this.
+|This parameter (attribute=value) determines if when you next start Cumulus it will send enhanced information to the [[debug]] file. It appears on a configuration screen in Cumulus 1 and in the station settings options section in MX.  With Cumulus stopped, you can edit the setting in the file and the new setting will apply when Cumulus is next started and it sets a local value by reading the configuration file. Debugging can also be switched on while you are running Cumulus of any flavour, the new setting of enhanced debugging will stop when you exit Cumulus as you only edit the value held locally (you don't edit the configuration file).
-Debugging can also be switched on while you are running Cumulus of any flavour. By default, enhanced debugging will stop when you exit Cumulus and the value will be reset to 0.
+*0 = default of normal output
+*1 = Set it to 1 to enable the enhanced output to the log that aids debugging if there is a problem.
+The parameter is ignored for MX prior to build 3018 but available in all Cumulus 1 builds.
 |-
 |ErrorLogSpikeRemoval=0