Cumulus.ini (preserving history): Difference between revisions

Cumulus.ini (preserving history) (view source)

414 bytes added , 08:17, 6 August 2018

m

→‎Instromet station specific:: Edit based on http://sandaysoft.com/forum/viewtopic.php?f=27&t=17044#p131104

5,838

edits

@@ Line 726: / Line 726: @@
 |-
 |LogExtraSensors=0
-|This is set in the settings frame on the Station settings screen off the configuration menu by the '''Extra Sensors''' selection.
+|This is set in the settings frame on the Station settings screen off the configuration menu by the '''Extra Sensors''' selection. If you have 'extra sensors' selected, the wet bulb reading will be used as an extra temperature sensor. Otherwise it is used as 'wet bulb' and the humidity will be calculated from that and the dry bulb sensor.
-*0=Disabled (default)
+*0=Disabled (default)- . For a wet bulb sensor, Cumulus will output the humidity, not the temperature shown by the wet bulb.
-*1= Enabled - Used for optional Sunshine hours or extra temperature sensors on Instromet stations.
+*1= Enabled - Used for optional Sunshine hours or extra temperature sensors on Instromet stations. For a wet bulb sensor, Cumulus will output the temperature it shows, but not calculate the humidity.
 (Note this attribute appears in [[#Davis_family_specific|Davis family]], [[#Oregon_Scientific_specific:|Oregon Scientific specific]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset family]] tables above with different usage explanations).
 |}