Cumulus.ini (preserving history): Difference between revisions

Cumulus.ini (preserving history) (view source)

Revision as of 16:56, 14 April 2014

48 bytes added , 16:56, 14 April 2014

m

→‎Oregon Scientific specific:: resequenced for better sense

Sfws

5,838

edits

@@ Line 462: / Line 462: @@
 |style="background:lightgray;"|[Station]
 |style="background:lightgray;"|Section name - the following parameters relate to the station configuration.
-|-
-|LogExtraSensors=0
-|This is set in the settings frame on the Station settings screen off the configuration menu.
-*0=Disabled (default)
-*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors.
-(Note this attribute appears under [[#Davis_family_specific|Davis]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset]] tables above with different usage explanations).
 |-
 |Humidity98Fix=0
@@ Line 473: / Line 467: @@
 *0 = Disabled (default)
 *1 = Enabled, humidity displayed and recorded as 100% if your sensor registers a relative humidity of 98% or greater.  Normally only useful for Oregon Scientific stations.
+|-
+|LogExtraSensors=0
+|This is set in the settings frame on the Station settings screen off the configuration menu if extra channels are to be used.
+*0=Disabled (default)
+*1= Enabled - Used for Oregon Scientific WMR-928 and similar stations if you have additional sensors (e.g. another temperature probe) to make Cumulus read, display, and log the readings from those sensors. You don't use this for Solar/UV sensors.
+(Note this attribute appears in [[#Davis_family_specific|Davis family]] and [[#Introduced_for_problems_with_Fine_Offset_family:|Fine Offset family]] tables above with different usage explanations).
 |-
 |WMR928TempChannel=N
-|This line needs to be added in the [Station] section of the Cumulus.ini. For WMR-928 stations (and other stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
+|This line needs to be added in the [Station] section of the Cumulus.ini file for WMR-928 stations (and other stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
 |}