Cumulus Wiki

Cumulus.ini (preserving history): Difference between revisions

Cumulus.ini (preserving history) (view source)

Revision as of 19:11, 6 September 2013

6,108 bytes added ,  19:11, 6 September 2013
m
→‎Section: Display: specify screen where each parameter is set since from 1.9.4 Colours not in display setting screen any more
m (→‎Section: FTP Site: Change 19 to 99 many places to reflect change in 1.9.3)
m (→‎Section: Display: specify screen where each parameter is set since from 1.9.4 Colours not in display setting screen any more)
Line 740: Line 740:


== Section: Display ==
== Section: Display ==
Set these parameters using Configuration menu and either ''Display'' or ''Colours'' screens.
Set these parameters using Configuration menu and [[Cumulus_Screenshots#Display_and_Colour_screens_as_at_version_1.9.4|either ''Display'' or ''Colours'' screens]] as seen on link and indicated below.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
Line 747: Line 747:
|-
|-
|style="background:lightgray;"|[Display]  
|style="background:lightgray;"|[Display]  
|style="background:lightgray;"|Section heading - the following parameters affect the way things are displayed.
|style="background:lightgray;"|Section heading - the following parameters affect how the main screen looks.
|-
|-
|Heading=My Weather  
|Heading=My Weather  
Line 753: Line 753:
|-
|-
|SavePosition=0
|SavePosition=0
|If set to 1, the current position of the main window will be saved to [[Cumulus.ini#Section:_MainForm]] when Cumulus closes, and the window will open again at that position the next time Cumulus starts.
|Set in the Display Configuration Screen General block.
*0= default, the main window will be displayed in the middle of the main or only monitor connected to your pc
*1= the current position of the main window will be saved to [[Cumulus.ini#Section:_MainForm]] when Cumulus closes, and the window will open again at that position the next time Cumulus starts.
|-
|-
|StartMinimised=0
|StartMinimised=0
|If set to 1, Cumulus will start with the main window minimised, either to the system tray or the task bar, depending on the 'MinimizeToTray' setting (see next parameter).
|Set in the Display Configuration Screen General block.
*0= default, the main window will be displayed on the main or only monitor connected to your pc
*1= If set to 1, Cumulus will start with the main window minimised, either to the system tray or the task bar, depending on the 'MinimizeToTray' setting (see next parameter).
|-
|-
|MinimizeToTray=0  
|MinimizeToTray=0  
|Set in the Display Configuration Screen General block
|Set in the Display Configuration Screen General block
*0 = Disabled (default)  
*0 = Disabled (default), Cumulus will minimise to the task bar
*1 = Enabled, causes Cumulus to appear as an icon in the system tray when it is minimized. The icon will flash if a record is broken or an error occurs. Double click on the icon to restore the main window (or right click on the icon and use the pop-up menu).
*1 = Enabled, causes Cumulus to appear as an icon in the system tray when it is minimized. The icon will flash if a record is broken or an error occurs. Double click on the icon to restore the main window (or right click on the icon and use the pop-up menu).
|-
|-
|ForecastCentred=0  
|ForecastCentred=0  
|Set in the Display Configuration Screen General block.
|Set in the Display Configuration Screen General block.
*0 = Disabled, (default) Forecast appears left justified on main screen
*0 = Disabled, (default) Forecast appears left justified on main screen below sun and moon details
*1 = Enabled, Forecast appears centred on main screen
*1 = Enabled, Forecast appears centred horizonatally on main screen below sun and moon details
|-
|ShowCurrentConditions=0
|Set in the Display Configuration Screen General block
*0 = Disabled, (default)
*1 = Enabled, a box labelled 'Current:' appears at bottom of Cumulus main screen. See [[Webtags_as_boolean_operators_in_HTML#Current_Weather_Conditions]] for possible use of this information, and [[Currentconditions.txt]] for the effect when the contents of the box on main screen changes.
|-
|-
|FontColour=4227327  
|FontColour=4227327  
|Decimal code for the screen font color
|Set on the colour setting screen in the Configuration menu.  Decimal code for the screen font color
|-
|-
|BackColour=12632256  
|BackColour=12632256  
|Decimal code for the application background color
|Set on the colour setting screen in the Configuration menu.  Decimal code for the application background color
|-
|-
|HeadingColour=10485760  
|HeadingColour=10485760  
|Decimal code for the screen heading color
|Set on the colour setting screen in the Configuration menu.  Decimal code for the screen heading color
|-
|-
|ClockColour=-16777201  
|ClockColour=-16777201  
|Decimal code for the main screen clock background color (
|Set on the colour setting screen in the Configuration menu.  Decimal code for the main screen clock background color
|-
|-
|DisplaySolarData=0  
|DisplaySolarData=0  
Line 796: Line 805:
|-
|-
|WMR928Channel1Caption=Extra channel 1  
|WMR928Channel1Caption=Extra channel 1  
|Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
|Set in the Display Configuration Screen ''WMR928 extra channel captions'' block. Note that the extra channel data for WMR928 stations is only displayed on the main screen if ''Display solar/extra data'' is Set in the Display Configuration Screen General block. This parameter defines the caption to be used when Cumulus reads observations from the extra sensor.
|-
|-
|WMR928Channel2Caption=Extra channel 2  
|WMR928Channel2Caption=Extra channel 2  
|Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
|Set in the Display Configuration Screen ''WMR928 extra channel captions'' block. Note that the extra channel data for WMR928 stations is only displayed on the main screen if ''Display solar/extra data'' is Set in the Display Configuration Screen General block. This parameter defines the caption to be used when Cumulus reads observations from the extra sensor.
|-
|-
|WMR928Channel3Caption=Extra channel 3  
|WMR928Channel3Caption=Extra channel 3  
|Set the captions on the main screen which are displayed along with the extra channel data for WMR928 stations.
|Set in the Display Configuration Screen ''WMR928 extra channel captions'' block. Note that the extra channel data for WMR928 stations is only displayed on the main screen if ''Display solar/extra data'' is Set in the Display Configuration Screen General block. This parameter defines the caption to be used when Cumulus reads observations from the extra sensor.
|-
|-
|WindGaugeRange=50  
|WindGaugeRange=50  
|Sets the default full scale deflection of the wind speed gauge
|Set in the Display Configuration Screen General block. Value represents the default full scale deflection of the top of the 3 wind plots in the wind speed units you have selected. Default value is 50 in that unit.
|-
|-
|SnowUnitText=cm  
|SnowUnitText=cm  
|Snow measurement unit. Default is cm.  Can be any unit you like, but all values must be an integer (without any decimal part)!
|Set in the Display Configuration Screen General block. Snow measurement unit. Default is cm.  Can be any unit (or other text) you like, remember all snow depth observations must be entered as an integer (without any decimal part)!
|-
|-
|DisplayHumidex=0  
|DisplayHumidex=0  
Line 816: Line 825:
|-
|-
|LegendSymbolWidth=3
|LegendSymbolWidth=3
|The width of the plot lines in graph legends
|Set in the Display Configuration Screen Graph block. The width of the plot lines in graph legends
|-
|WindRoseColour=8388608
|
|-
|ShowCurrentConditions=0
|Set in the Display Configuration Screen General block
*0 = Disabled, (default)
*1 = Enabled, a box labelled 'Current:' appears at bottom of Cumulus main screen. See [[Webtags_as_boolean_operators_in_HTML#Current_Weather_Conditions]] for possible use of this information, and [[Currentconditions.txt]] for the effect when the contents of the box on main screen changes.
|-
|NumWindRosePoints=16
|Set in the Display Configuration Screen Graphs block
The number of points to plot on the Wind Rose diagram (suggest 8 for FO stations)
|-
|-
|ChartLineWidth=2
|ChartLineWidth=2
|The width of the plot lines in the graph body
|Set in the Display Configuration Screen Graph block. The width of the plot lines in the graph body
|-
|-
|ClockDigitColour=4227327
|ClockDigitColour=4227327
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the figures in top right corner of main screen
|-
|-
|WindRoseTransparency=50
|WindGaugeArcColour=16773091
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|-
|WindGaugeAnimated=1
|WindGaugeAnimated=1
|Animate the Wind Gauge pointer movement
|Set in the Display Configuration Screen.  Animate the Wind Gauge pointer movement
*0 = Disabled,
*0 = Disabled,
*1 = Enabled (default)
*1 = Enabled (default)
|-
|-
|WindGaugeAnimationFactor=2
|WindGaugeAnimationFactor=2
|This sets the speed of the wind gauge animation. Lower values correspond to a faster animation speed. Be careful not to set the animation too slow, particularly with stations which update frequently (e.g. Davis) as the animation will never catch up, and will use significant CPU time.
|Set in the Display Configuration Screen. This sets the speed of the wind gauge animation. Lower values correspond to a faster animation speed. Be careful not to set the animation too slow, particularly with stations which update frequently (e.g. Davis) as the animation will never catch up, and will use significant CPU time.
|-
|WindGaugeTickColour=9841920
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeFontColour=9841920
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeInnerCircleColour=16765615
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeNeedleColour=128
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeInnerCentreColourFrom=16765615
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeInnerCentreColourTo=16765615
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterCentreColourFrom=16765357
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterCentreColourTo=16711680
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterCircleColour=16765615
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeOuterRimColour=9470064
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeAverageSectorColour=32768
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugePeakSectorColour=33023
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeNeedleShineColourFrom=1049273
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|WindGaugeNeedleShineColourTo=328090
|Set on the colour setting screen in the Configuration menu.  Decimal code for the upper of the 3 wind plots
|-
|-
|CompassColour=12632256
|CompassColour=12632256
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the middle of the 3 wind plots
|-
|-
|CompassTickColour=16711680
|CompassTickColour=16711680
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the middle of the 3 wind plots
|-
|-
|CompassLabelColour=16777215
|CompassLabelColour=16777215
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the middle of the 3 wind plots
|-
|-
|CompassBearingColour=0
|CompassBearingColour=0
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the middle of the 3 wind plots
|-
|-
|CompassCurrentPointerColour=255
|CompassCurrentPointerColour=255
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the middle of the 3 wind plots
|-
|-
|CompassAveragePointerColour=16711680
|CompassAveragePointerColour=16711680
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the middle of the 3 wind plots
|-
|WindRoseColour=8388608
|Set on the colour setting screen in the Configuration menu.  Decimal code for the wind rose shading that represents duration and intensity of wind in different directions
|-
|-
|WindRoseLabelColour=0
|WindRoseLabelColour=0
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the wind rose compass points
|-
|WindRoseAxesColour=8388608
|Set on the colour setting screen in the Configuration menu.  Decimal code for the circle and radii of lower of the 3 wind plots
|-
|WindRoseTransparency=50
|Set on the colour setting screen in the Configuration menu.
|-
|NumWindRosePoints=16
|Set in the Display Configuration Screen Graphs block
The number of points to plot on the Wind Rose diagram (choose 8 for Fine Offset stations)
|-
|-
|TransparentGauges=0
|TransparentGauges=0
|The square backgrounds of the three wind gauges on the Cumulus main screen can be the same colour as the main window background, or, with this option selected, the images will be processed to make the background colour transparent.
|Set on the colour setting screen in the Configuration menu. The square backgrounds of the three wind gauges on the Cumulus main screen
*0= same colour as the main window background (default)
*1= the images will be processed to make the background colour transparent.
|-
|-
|LogFTPErrors=1
|LogFTPErrors=1
|Controls logging of FTP errors to the Cumulus Error Dialog display, set to 0 to suppress the logging of FTP errors.
|Set in the Display Configuration Screen General block
*1= (default), the FTP errors will be logged to the Cumulus Error Dialog display
*0= to suppress the logging of FTP errors.
|-
|DigitBackground=0
|Set on the colour setting screen in the Configuration menu.  Decimal code for the colour to be used for background to displayed observations on main screen
|-
|-
|LabelColour=0
|LabelColour=0
|Parameter labels on main screen - default black. Note alarm conditions can change label colour (see next 2 parameters).
|Set on the colour setting screen in the Configuration menu.  Decimal code for the Parameter labels on main screen - default black. Note alarm conditions can change label colour (see next 2 parameters).
|-
|-
|AlarmColour=255
|AlarmColour=255
|Parameter labels on main screen - default red - when an alarm is set for that parameter
|Set on the colour setting screen in the Configuration menu.  Decimal code for the Parameter labels on main screen - default red - when an alarm is set for that parameter
|-
|-
|PastAlarmColour=16711680
|PastAlarmColour=16711680
|Parameter labels on main screen - default blue - when an alarm is cleared for that parameter
|Set on the colour setting screen in the Configuration menu.  Decimal code for the Parameter labels on main screen - default blue - when an alarm is cleared for that parameter
|-
|-
|PanelHeadingFontColour=0
|PanelHeadingFontColour=0
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the heading at the top of each panel with observations
|-
|-
|PanelLineColour=0
|PanelLineColour=0
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the heading at the top of each panel with observations
|-
|-
|PanelBorderColour=8421504
|PanelBorderColour=8421504
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the edging of each panel with observations
|-
|-
|PanelGradientColourFrom=16777215
|PanelGradientColourFrom=16777215
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the panel background
|-
|-
|PanelGradientColourTo=13226453
|PanelGradientColourTo=13226453
|
|Set on the colour setting screen in the Configuration menu.  Decimal code for the panel background
|-
|WindGaugeArcColour=16773091
|
|-
|WindGaugeTickColour=9841920
|
|-
|WindGaugeFontColour=9841920
|
|-
|WindGaugeInnerCircleColour=16765615
|
|-
|WindGaugeNeedleColour=128
|
|-
|WindGaugeInnerCentreColourFrom=16765615
|
|-
|WindGaugeInnerCentreColourTo=16765615
|
|-
|WindGaugeOuterCentreColourFrom=16765357
|
|-
|WindGaugeOuterCentreColourTo=16711680
|
|-
|WindGaugeOuterCircleColour=16765615
|
|-
|WindGaugeOuterRimColour=9470064
|
|-
|WindGaugeAverageSectorColour=32768
|
|-
|WindGaugePeakSectorColour=33023
|
|-
|WindRoseAxesColour=8388608
|
|-
|WindGaugeNeedleShineColourFrom=1049273
|
|-
|WindGaugeNeedleShineColourTo=328090
|
|-
|-
|DisplayBeaufortDesc=1
|DisplayBeaufortDesc=1
|Set in the Display Configuration Screen General block
|Set in the Display Configuration Screen General block
If set to 1, the Beaufort description of the current average wind speed will appear in the header of the wind panel on the main screen. If set to 0, it will instead appear as a 'tool tip' for the wind panel.
*1 (default), the Beaufort description of the current average wind speed will appear in the header of the wind panel on the main screen.
*0, it will instead appear as a 'tool tip' for the wind panel.
|-
|-
|DisplayBarometerTrendText=1
|DisplayBarometerTrendText=1
|If set to 1, the description of the current barometer trend will appear in the header of the barometer panel on the main screen. If set to 0, it will instead appear as a 'tool tip' for the barometer panel.
|Set in the Display Configuration Screen General block
*1 (default), the description of the current barometer trend will appear in the header of the barometer panel on the main screen.  
*0, it will instead appear as a 'tool tip' for the barometer panel.
|-
|-
|UpdateAtStartup=1
|UpdateAtStartup=1
|If set to 1, the the display will be updated as data is downloaded and processed from the station's logger. This increases the time taken to process the data. If set to 0, it makes the download faster; this may be significant if there is a lot of data to download.
|Set in the Display Configuration Screen General block
*1 (default), the display will be updated as data is downloaded and processed from the station's logger. This increases the time taken to process the data.
*0, it makes the download faster as display is onlyn updated when catch up completed; this may be significant if there is a lot of data to download.
|-
|-
|IndependentGraphsWindow=0
|IndependentGraphsWindow=0
|
|Set in the Display Configuration Screen Graphs block
|-
*0 = Disabled (default)
|DigitBackground=0
*1 = Enabled
|
|}
|}


Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/3007"