1,120
edits
Cumulus.ini (preserving history): Difference between revisions
Cumulus.ini (preserving history) (view source)
Revision as of 21:46, 30 August 2009
, 21:46, 30 August 2009Added links to various other Cumulus Wiki pages
m (Logging=1 VP2SleepInterval WS2300Sync VPClosedownTime APRSHumidityCutoff and EWduplicatecheck added to [Station] section) |
m (Added links to various other Cumulus Wiki pages) |
||
| Line 11: | Line 11: | ||
|- | |- | ||
|Type=-1 | |Type=-1 | ||
|Station Type as set by the checked radio box in the Station Configuration Screen Station Type block | |Station Type as set by the checked radio box in the [[Cumulus_Screenshots#Configuration_Menu_Screens|Station Configuration Screen]], Station Type block | ||
*0=Vantage Pro | *0=Vantage Pro | ||
| Line 83: | Line 83: | ||
|Confirm you wish to close Cumulus application after telling it to close | |Confirm you wish to close Cumulus application after telling it to close | ||
*0 = Disabled, application will close immediately | *0 = Disabled, application will close immediately | ||
*1 = Enabled, application will prompt for | *1 = Enabled, application will prompt for confirmation that you wish to close it | ||
|- | |- | ||
|CloseOnSuspend=1 | |CloseOnSuspend=1 | ||
| Line 165: | Line 165: | ||
|- | |- | ||
|UseCumulusForecast=0 | |UseCumulusForecast=0 | ||
|From the Station Configuration Screen Forecast block, if selected Cumulus will generate a simple weather forecast, if your station does not supply one, or as an alternative to the one supplied by your station. | |From the Station Configuration Screen Forecast block, if selected Cumulus will generate a simple weather forecast, if your station does not supply one, or as an alternative to the one supplied by your station. See the [[Forecast webtag]] for more information. | ||
*0 = Disabled (default) | *0 = Disabled (default) | ||
*1 = Enabled | *1 = Enabled | ||
| Line 218: | Line 218: | ||
|- | |- | ||
|EWTempdiff=x.y | |EWTempdiff=x.y | ||
|Enter this line in the [Station] section of the Cumulus.ini to filter | |Enter this line in the [Station] section of the Cumulus.ini to filter erroneous temperature readings from your sensor. Replace x.y with the maximum difference in degrees C you are prepared to accept between successive data readings | ||
|- | |- | ||
|RTdisconnectcount=60 | |RTdisconnectcount=60 | ||
| Line 234: | Line 234: | ||
|- | |- | ||
|Logging=1 | |Logging=1 | ||
|Add to cumulus.ini [Station] section to have Cumulus start with debug logging on | |Add to cumulus.ini [Station] section to have Cumulus start with [[debug]] logging on | ||
|- | |- | ||
|VP2SleepInterval=x | |VP2SleepInterval=x | ||
| Line 247: | Line 247: | ||
|- | |- | ||
|APRSHumidityCutoff=1 | |APRSHumidityCutoff=1 | ||
|Add to [Station] section For Scientific technical It doesn't report humidity to APRS when the temperature is below -10°C | |Add to [Station] section For Scientific technical It doesn't report humidity to [[APRS]] when the temperature is below -10°C | ||
|- | |- | ||
|EWduplicatecheck=0 | |EWduplicatecheck=0 | ||
| Line 253: | Line 253: | ||
|- | |- | ||
|[Web Site] | |[Web Site] | ||
|Section Name - the following parameters | |Section Name - the following parameters relate to your website | ||
|- | |- | ||
|ForumURL=<nowiki>http://sandaysoft.com/forum/</nowiki> | |ForumURL=<nowiki>http://sandaysoft.com/forum/</nowiki> | ||
| Line 292: | Line 292: | ||
|Set in the Internet Configuration Screen Web Settings block. | |Set in the Internet Configuration Screen Web Settings block. | ||
*0 = Disabled | *0 = Disabled | ||
*1 = Enabled, Cumulus will upload a file called realtime.txt to your web site, at the interval specified by Realtime Interval (see below). This file contains various weather parameters and is used by the CumulusRealtime.swf real time wind gauges (as on the supplied 'gauges' web page. If you don't have this option selected, but do have the 'auto update' option set (and a suitable interval configured), Cumulus will still create the realtime.txt file at the specified Interval (not the Realtime Interval) so that you can specify it as an extra file to upload during the 'normal' upload, or use it for any other purpose on your PC. | *1 = Enabled, Cumulus will upload a file called [[realtime.txt]] to your web site, at the interval specified by Realtime Interval (see below). This file contains various weather parameters and is used by the CumulusRealtime.swf real time wind gauges (as on the supplied 'gauges' web page. If you don't have this option selected, but do have the 'auto update' option set (and a suitable interval configured), Cumulus will still create the realtime.txt file at the specified Interval (not the Realtime Interval) so that you can specify it as an extra file to upload during the 'normal' upload, or use it for any other purpose on your PC. | ||
|- | |- | ||
|RealtimeInterval=3000 | |RealtimeInterval=3000 | ||
| Line 767: | Line 767: | ||
|- | |- | ||
|Background=12632256 | |Background=12632256 | ||
|Decimal value for the Graph background | |Decimal value for the Graph background colour. | ||
|- | |- | ||
|WindColour=65535 | |WindColour=65535 | ||
|Decimal value for the 10 minute average wind speed plot | |Decimal value for the 10 minute average wind speed plot colour | ||
|- | |- | ||
|GustColour=8421376 | |GustColour=8421376 | ||
|Decimal value for the Wind Gust plot | |Decimal value for the Wind Gust plot colour | ||
|- | |- | ||
|RainColour=9527753 | |RainColour=9527753 | ||
|Decimal value for the Rain plot | |Decimal value for the Rain plot colour | ||
|- | |- | ||
|RainTodayColour=9527753 | |RainTodayColour=9527753 | ||
|Decimal value for the Rain Today plot | |Decimal value for the Rain Today plot colour | ||
|- | |- | ||
|TempColour=9527753 | |TempColour=9527753 | ||
|Decimal value for the Temperature plot | |Decimal value for the Temperature plot colour | ||
|- | |- | ||
|HeatIndexColour=16711680 | |HeatIndexColour=16711680 | ||
|Decimal value for the Heat Index plot | |Decimal value for the Heat Index plot colour | ||
|- | |- | ||
|PressColour=9527753 | |PressColour=9527753 | ||
|Decimal value for the Pressure plot | |Decimal value for the Pressure plot colour | ||
|- | |- | ||
|WindDirColour=255 | |WindDirColour=255 | ||
|Decimal value for the Wind Direction plot | |Decimal value for the Wind Direction plot colour | ||
|- | |- | ||
|DewPointColour=255 | |DewPointColour=255 | ||
|Decimal value for the Dew Point plot | |Decimal value for the Dew Point plot colour | ||
|- | |- | ||
|WindChillColour=32768 | |WindChillColour=32768 | ||
|Decimal value for the Wind Chill plot | |Decimal value for the Wind Chill plot colour | ||
|- | |- | ||
|MinTempColour=16711680 | |MinTempColour=16711680 | ||
|Decimal value for the Minimum Temperature plot | |Decimal value for the Minimum Temperature plot colour | ||
|- | |- | ||
|MaxTempColour=255 | |MaxTempColour=255 | ||
|Decimal value for the Maximum Temperature plot | |Decimal value for the Maximum Temperature plot colour | ||
|- | |- | ||
|AvgTempColour=32768 | |AvgTempColour=32768 | ||
|Decimal value for the Average Temperature plot | |Decimal value for the Average Temperature plot colour | ||
|- | |- | ||
|DailyRainColour=32768 | |DailyRainColour=32768 | ||
|Decimal value for the Daily Rain plot | |Decimal value for the Daily Rain plot colour | ||
|- | |- | ||
|InsideTempColour=0 | |InsideTempColour=0 | ||
|Decimal value for the Inside Temperature plot | |Decimal value for the Inside Temperature plot colour | ||
|- | |- | ||
|InsideHumColour=255 | |InsideHumColour=255 | ||
|Decimal value for the Inside Humidity plot | |Decimal value for the Inside Humidity plot colour | ||
|- | |- | ||
|OutsideHumColour=16711680 | |OutsideHumColour=16711680 | ||
|Decimal value for the Outside Humidity plot | |Decimal value for the Outside Humidity plot colour | ||
|- | |- | ||
|Graph3D=0 | |Graph3D=0 | ||
| Line 983: | Line 983: | ||
|- | |- | ||
|WindSpeedMult=1 | |WindSpeedMult=1 | ||
|Multiplier by which measured Average Wind Speed to be corrected. Officially wind speed is measured with sensors at 10m above ground level. If your sensor is not at 10m AGL then a correction multiplier should be applied using the following formula ''V10/Vh = 1/(0.233 + 0.656*log10(h+4.75))'' where "h" is your sensor height in meters. | |Multiplier by which measured Average [[Wind_measurement|Wind Speed]] to be corrected. Officially wind speed is measured with sensors at 10m above ground level. If your sensor is not at 10m AGL then a correction multiplier should be applied using the following formula ''V10/Vh = 1/(0.233 + 0.656*log10(h+4.75))'' where "h" is your sensor height in meters. | ||
e.g. if your anemometer is 5m off the ground, V10/Vh comes out at 1.134 | e.g. if your anemometer is 5m off the ground, V10/Vh comes out at 1.134 | ||
|- | |- | ||