Cumulus Wiki

Cumulus.ini (preserving history): Difference between revisions

Cumulus.ini (preserving history) (view source)

Revision as of 09:41, 28 August 2009

3,313 bytes added ,  09:41, 28 August 2009
no edit summary
No edit summary
No edit summary
Line 789: Line 789:
|-
|-
|alarmlowtemp=0  
|alarmlowtemp=0  
|
|Select in Edit Alarms Screen
*0 = Disable low temperature alarm (default)
*1 = Enable Low temperature alarm
|-
|-
|LowTempAlarmSet=0  
|LowTempAlarmSet=0  
|
|Setting for low temperature alarm point (degrees)
|-
|-
|LowTempAlarmSound=0  
|LowTempAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|LowTempAlarmSoundFile=C:\Cumulus\alert.wav  
|LowTempAlarmSoundFile=C:\Cumulus\alert.wav  
|
|Path and file name of sound file for Low Temperature alarm
|-
|-
|alarmhightemp=0  
|alarmhightemp=0  
|
|Select in Edit Alarms Screen
*0 = Disable high temperature alarm (default)
*1 = Enable High temperature alarm
|-
|-
|HighTempAlarmSet=0  
|HighTempAlarmSet=0  
|
|Degrees above which alarm will occur.
|-
|-
|HighTempAlarmSound=0  
|HighTempAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|HighTempAlarmSoundFile=C:\Cumulus\alert.wav  
|HighTempAlarmSoundFile=C:\Cumulus\alert.wav  
|
|Path and file name of sound file for High Temperature alarm
|-
|-
|alarmlowpress=0  
|alarmlowpress=0  
|
|Select in Edit Alarms Screen
|-
|-
|LowPressAlarmSet=0  
|LowPressAlarmSet=0  
|
|Pressure below which you wish Low Pressure alarm to occur
|-
|-
|LowPressAlarmSound=0  
|LowPressAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|LowPressAlarmSoundFile=C:\Cumulus\alert.wav  
|LowPressAlarmSoundFile=C:\Cumulus\alert.wav  
|
|Path and file name for sound file to play for Low Pressure Alarm
|-
|-
|alarmhighpress=0  
|alarmhighpress=0  
|
|Select in Edit Alarms Screen
*0 = Disable low High Pressure alarm (default)
*1 = Enable High Pressure alarm
|-
|-
|HighPressAlarmSet=0  
|HighPressAlarmSet=0  
|
|Pressure above which you wish High Pressure alarm to occur
|-
|-
|HighPressAlarmSound=0  
|HighPressAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|HighPressAlarmSoundFile=C:\Cumulus\alert.wav  
|HighPressAlarmSoundFile=C:\Cumulus\alert.wav  
Line 837: Line 851:
|-
|-
|alarmhighraintoday=0  
|alarmhighraintoday=0  
|
|Select in Edit Alarms Screen
*0 = Disable High Rain today alarm (default)
*1 = Enable High Rain today alarm
|-
|-
|HighRainTodayAlarmSet=0  
|HighRainTodayAlarmSet=0  
|
|Rain level above which alarm to occur
|-
|-
|HighRainTodayAlarmSound=0  
|HighRainTodayAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|HighRainTodayAlarmSoundFile=C:\Cumulus\alert.wav  
|HighRainTodayAlarmSoundFile=C:\Cumulus\alert.wav  
Line 849: Line 867:
|-
|-
|alarmhighrainrate=0  
|alarmhighrainrate=0  
|
|Select in Edit Alarms Screen
*0 = Disable High Rain Rate alarm (default)
*1 = Enable High Rain Rate alarm
|-
|-
|HighRainRateAlarmSet=0  
|HighRainRateAlarmSet=0  
|
|Rain rate above which you wish alarm to occur
|-
|-
|HighRainRateAlarmSound=0  
|HighRainRateAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|HighRainRateAlarmSoundFile=C:\Cumulus\alert.wav  
|HighRainRateAlarmSoundFile=C:\Cumulus\alert.wav  
Line 861: Line 883:
|-
|-
|alarmhighgust=0  
|alarmhighgust=0  
|
|Select in Edit Alarms Screen
*0 = Disable High Gust alarm (default)
*1 = Enable High Gust alarm
|-
|-
|HighGustAlarmSet=0  
|HighGustAlarmSet=0  
|
|Gust speed above which you wish alarm to occur
|-
|-
|HighGustAlarmSound=0  
|HighGustAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|HighGustAlarmSoundFile=C:\Cumulus\alert.wav  
|HighGustAlarmSoundFile=C:\Cumulus\alert.wav  
Line 873: Line 899:
|-
|-
|alarmhighwind=0  
|alarmhighwind=0  
|
|Select in Edit Alarms Screen
*0 = Disable High Average Wind alarm (default)
*1 = Enable High Average Wind alarm
|-
|-
|HighWindAlarmSet=0  
|HighWindAlarmSet=0  
|
|Average Wind speed above which alarm to occur
|-
|-
|HighWindAlarmSound=0  
|HighWindAlarmSound=0  
|
|Alarm Action
*0 = Disable, (default) no sound on alarm
*1 = Enable sound on alarm
|-
|-
|HighWindAlarmSoundFile=C:\Cumulus\alert.wav  
|HighWindAlarmSoundFile=C:\Cumulus\alert.wav  
Line 888: Line 918:
|-
|-
|PressOffset=0  
|PressOffset=0  
|
|Value by which Measured Pressure to be corrected (Add/Subtract)
|-
|-
|TempOffset=0  
|TempOffset=0  
|
|Value by which Measured Outdoor Temperature to be corrected (Add/Subtract)
|-
|-
|HumOffset=0  
|HumOffset=0  
|
|Value by which Measured Humidity to be corrected (Add/Subtract)
|-
|-
|WindDirOffset=0  
|WindDirOffset=0  
|
|Value by which Measured Wind Direction to be corrected (Add/Subtract)
|-
|-
|InTempOffset=0  
|InTempOffset=0  
|
|Value by which Measured Indoor Temperature to be corrected (Add/Subtract)
|-
|-
|WindSpeedMult=1  
|WindSpeedMult=1  
|
|Multiplier by which measured Average Wind Speed to be corrected.  Officially wind speed is measured with sensors at 10m above ground level.  If your sensor is not at 10m AGL then a correction multiplier should be applied using the following formula ''V10/Vh = 1/(0.233 + 0.656*log10(h+4.75))'' where "h" is your sensor height in meters.
e.g. if your anemometer is 5m off the ground, V10/Vh comes out at 1.134
|-
|-
|WindGustMult=1  
|WindGustMult=1  
|
|Multiplier by which measured Wind Gust Speed to be corrected.
|-
|-
|TempMult=1  
|TempMult=1  
|
|Multiplier by which measured Temperature to be corrected.
|-
|-
|HumMult=1  
|HumMult=1  
|
|Multiplier by which measured Humidity to be corrected.
|-
|-
|RainMult=1  
|RainMult=1  
|
|Multiplier by which measured Rainfall to be corrected.
|-
|-
|[xAP]  
|[xAP]  
Line 921: Line 952:
|-
|-
|Enabled=0  
|Enabled=0  
|
|When set, Cumulus will periodically send out xAP weather reports. See [http://www.xapautomation.org/ http://www.xapautomation.org/] for more details
*0 = Disabled (default)
*1 = Enabled
|-
|-
|UID=4375  
|UID=4375  
|
|Sets the UID for xAP messages. You should only need to change this if you have more than one instance of Cumulus running on a network.
|-
|-
|Port=3639
|Port=3639
|
|IP port your computer uses to send data to xAP
|}
|}


[[Category: Configuration Files]]
[[Category: Configuration Files]]
Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/208"