5,838
edits
Cumulus.ini (Beta): Difference between revisions
m
→Davis family specific:
m (→Davis family specific:: added build info) |
|||
| Line 90: | Line 90: | ||
|- | |- | ||
|DataLogging=0 | |DataLogging=0 | ||
|This parameter (attribute=value) is added directly to the file, it does not appear on a configuration screen. | |This parameter (attribute=value) is added directly to the file, it does not appear on a configuration screen. Default is 0, change to 1 for more detailed Davis logging. | ||
*0 (default) = Cumulus MX will not add extra logging. | *0 (default) = Cumulus MX will not add extra logging. | ||
*1 = To add extra logging to the diags file for data received from Davis stations. Use this with care, the log will get very large. (Build 3018 onwards). | *1 = To add extra logging to the diags file for data received from Davis stations. Use this with care, the log will get very large. (Build 3018 onwards). | ||
I've also added some more diagnostics to try to find the cause of the problem where data stops being read from Davis stations. Debug logging is required to be turned on. (Build 3022 onwards). | I've also added some more diagnostics to try to find the cause of the problem where data stops being read from Davis stations. Debug logging is required to be turned on. (Build 3022 onwards).|- | ||
|- | |||
|AutoUpdateIpAddress=1 | |||
|(read-only, you cannot edit this on station settings screen, you must type it directly into file) default = 1, set to 0 to switch off the WLL autodetection of IP address. This is a workaround for a WLL firmware bug that does not update the IP address when it changes using DHCP. | |||
|- | |||
|ZeroConfig | |||
|set this on station settings screen; to enable/disable the entry/update of the stations IP address via auto-discovery | |||
|} | |} | ||