1,128
edits
Line 331: | Line 331: | ||
|LogExtraSensors=0 | |LogExtraSensors=0 | ||
|Set this to 1 if you have additional sensors (e.g. a Davis Leaf Wetness probe) to make Cumulus read, display, and log the readings from the sensors. You don't need to select this for Solar/UV sensors. | |Set this to 1 if you have additional sensors (e.g. a Davis Leaf Wetness probe) to make Cumulus read, display, and log the readings from the sensors. You don't need to select this for Solar/UV sensors. | ||
|- | |||
|DavisCalcAltPress=1 | |||
>>Added in Beta 1.9.3 b1036<< | |||
|Davis stations calculate Sea Level Pressure from Station Pressure using a formula based on several parameters such as temperature, humidity, etc, rather than just using altitude as most other stations. CWOP require 'Altimeter Pressure' to be uploaded, i.e. a value calculated simply using altitude. The station does not provide this value directly, nor the station pressure, so Cumulus has to read some extra data once a minute in order to do the calculation. This can take several seconds, so it means that a 'normal' data reading may be missed. | |||
If you don't use CWOP, or you are happy for Cumulus to send Sea-Level pressure to CWOP (the difference is small unless you are at high altitude), set this value to 0. | |||
Cumulus will then use the Sea-Level Pressure value instead of the Cumulus calculated Altimeter Pressure. | |||
*0 = Disabled | |||
*1 = Enabled (default) | |||
|} | |} | ||