Dayfile.txt: Difference between revisions

From Cumulus Wiki
Jump to navigationJump to search
7,641 bytes removed ,  27 September 2022
m
Correcting Typos (mostly missing, but critical, colon characters in links), and mention of some more release 3.20.0 changes
m (Correcting Typos (mostly missing, but critical, colon characters in links), and mention of some more release 3.20.0 changes)
 
(112 intermediate revisions by 3 users not shown)
{{Template:Version badge Mx}}{{Version badge 1}}This Wiki page applies to both Cumulus flavours. [[Category:Files_with_Comma_Separated_Values]]
= Introduction =
 
As part of a redevelopment of Wiki, this page has been simplified, by moving some content to new pages. Old links in the support forum, that were to content no longer on this page, will bring you here.
Cumulus maintains a daily log file that holds the highs and lows of each day, as well as a few other nuggets of information. In all flavours of Cumulus, this file is only updated (with exclusive lock) during the end of meteorological day process. In that process it is also read if the generation of NOAA reports has been requested.
 
'''Content previously on this page has been moved as follows''':
In Cumulus 1 only, the figures contained in the file are used for the 'This period' display accessed from the '''View''' menu and to build any graphs based on daily values.
* Explanations about Cumulus terminology can be accessed from [[:Category:Terminology]] page
* Each line in this file represents one day, but the start time need not be same for all fields,
** so please see [[Meteorological_day|Meteorological day]], and [[today.ini]] for more details about that
* Advice regarding editing this file has been moved to [[Amending dayfile]] page, this also covers date-separator issues and dealing with missing or corrupted lines
* General advice about Cumulus files with a '''.txt''' extension has been consolidated on [[:Category:Files_with_Comma_Separated_Values]] page
* Advice about correcting any rogue extreme figures inadvertently stored in this file has been consolidated in new [[Correcting Extremes]] page
* If some lines in your file have fewer fields than other lines the advice has been consolidated on [[Calculate Missing Values]] page
** For MX there is a [[Calculate_Missing_Values#CreateMissing.exe|Create Missing Utility]], which checks spot readings in the [[Standard_log_files|MMMyylog.txt]] files, adds any missing derivative spots (e.g. heat index) and uses these figures to recalculate daily derivatives and uses those to replace missing fields/lines in dayfile.txt
** For the legacy Cumulus, there was a [[Amending_dayfile#Create_Missing_on_legacy_dayfile_editor|dayfile editor with create missing option]], that performed equivalent function
** If you import historic data from before you started using Cumulus into [[Standard log files]],
** then see [[Calculate Missing Values]] page for how to generate new lines in dayfile.txt
* Cumulus MX is more fussy, than Cumulus 1, about various formatting issues, see below, also see [[Migrating_from_Cumulus_1_to_MX#dayfile.txt]] section for more advice
 
The content that remains on this page is summarised by the table of contents that follows.
The format of this file is the same for both Cumulus 1 and Cumulus MX, although the number of fields in the file increases in various versions as shown at the end of this article. The file can be ported between flavours only if both are run with exactly the same locale settings, as using a different locale may change the field separator or the symbol used for decimal points.
{{TOCright}}
 
=About this file=
= When Cumulus is left running =
 
* This Wiki page describes one of the [[:Category:Cumulus Files|files]] not included in any release download.
* Cumulus is frequently reading observations from your weather station, but these don't affect the daily log "dayfile.txt" as it is only updated once a day.
* This daily summary file (Steve Loft shortened that to "day" plus "file") uses a ".txt" extension, and is essentially a plain text file in CSV format.
* There are no updates to dayfile.txt at any other times, but (for Cumulus 1 only) the contents of the file are read and processed for many of the display and edit menu options that can be selected from the main Cumulus 1 screen.
** CSV stands for "Comma Separated Values", but in the Cumulus context the field separator can be other characters including ";" or "|"
* Cumulus tracks the highs and lows in weather observations by comparing read values against those it has stored in [[Today.ini]], updating that file as required. (It also updates [[Alltime.ini]], [[Monthlyalltime.ini]], [[Year.ini]], and [[Month.ini]] when appropriate.
* The file is created in [[data folder|data sub-folder]] of your Cumulus installation when Cumulus needs to store its first line in this file.
* Cumulus will not mind you accessing the daily log outside its software, except when it needs write access for processing end of day.
* Cumulus MX reads the whole of this file into an internal array (stored in RAM) each time you restart the software,
* If you do need to correct some rogue data in the log file, first take a copy and work on that copy, because any edits you do could muck up the specific format that Cumulus 1 or MX needs, there is a section on dealing with rogue data below. Only when you are absolutely sure that your edited copy meets all the constraints listed later, should you replace the original.
** Please see [[Amending_dayfile#Warning_if_editing_outside_MX|here for implications]]
** Therefore MX users who move to a different location should archive the old "dayfile.txt", to avoid any discontinuities in any graphs plotted from active file
 
== When Cumulus processes the end of the (meteorological) day ==
*A new row is appended to dayfile.txt, the values are prepared from reading "today.ini" file, not all values available in "today.ini" are stored in dayfile.txt.
*Some of this information is also stored in [[yesterday.ini]].
*Back ups of both today.ini, and dayfile.txt, log files ''in their state after the end of day update'' are copied to the 'cumulus\backup\daily' folder, a maximum of only 9 daily sub-folders are retained.
 
([[Speciallog.txt|speciallog.txt]] is another log file that contains all dates in a single file, as do all the [[:Category:Ini_Files|.ini files]]).
'''Optional'''
* Some people require a copy of the local file to use on their web server. Consequently, after it has been updated they file transfer it to (or if their web server is local, copy it to) their web server. One way of doing this is [[Upload_Dayfile| described here]].
*Some people take a copy of the local file, and use it locally for other purposes. See [[#How you can use the daily log|How you can use the daily log section]] and also the [[[[User Contributions|Cumulusutils]]]] link.
*For some people it is easier to follow an option of converting the file into a database table, and that table having a new row added each time the file gains a new line as described below.
=== Populating a database table ===
 
* The [[ImportCumulusFile|article here]] describes a method that can be used with Cumulus 1 to mimic the contents of dayfile.txt in a database table. However, be aware that the later versions of that script have bee edited for MX, so you will need to use an older version of the script that fits the version of Cumulus 1 you are using.
*There is a section at [[Cumulus_MX#Optional_Sections|Cumulus MX]] to explain how MX includes the ability to generate SQL for creating the database table, for updating it with past data, and to add a new row at the end of the day for the standard database table version of this daily summary log.
 
==How Cumulus Creates and Updates this file==
==== Using that table ====
In both cases, your web site can use that database table avoiding any clash of timing with the Cumulus 1 or MX use of the daily summary log.
 
* Cumulus reads values supplied by your weather station, (either directly while Cumulus running, or for some weather station types can read historic data during catch-up on restarting Cumulus)
For examples of some of the third party tools (Cumulus [[Category:User_Contributions|user contributions]]) using the database daily summary table see [[Daily Summary#Some_example_Scripts|here]]. Of course there are also a lot of tools written to use a copy of the dayfile.txt log file, and some of these could be adapted to use the database table instead, if you are a programmer.
* Cumulus converts them to the units you prefer,
* Cumulus applies any calibration (multiplier and offset) you have set,
* For a sub-set of those readings (perhaps those every minute if readings are collected every 10 seconds), the spot values of source items like temperature, humidity, wind speed, can be used in calculations of derived items like "wind chill", "dewpoint" and "feel-like" temperature.
* Cumulus then sees if the resulting soource, or derived, value implies [[:Category:Ini Files|any extreme records file]] needs to be updated
** Daily extremes are held in [[today.ini]] and that is main source used when a new line is added to "dayfile.txt"
 
In my case I also store the equivalent of what appears on my version of "thismonth.htm" each month in another database table, i.e. I have one database table column for each of the weather derivatives I show on my web page that show this month's values; it is many more derivatives than are shown on the standard web page, but some are initially hidden. Consequentially, when my daily update script detects from the date that it is processing the last day of a month, it then starts another script that reads all the rows in the daily summary table for that month, and stores the highest/lowest/total (as relevant) in my monthly_summary table (nothing to do with the "monthly" table that MX can generate). This monthly summary table allows me to have web pages that compare consecutive months or compare months between years. Just another example of how much you can get from just one log file!
 
==Why this file should be backed up==
 
* This file contains daily extremes, the accuracy of those daily extremes depends on the interval between the spot readings that are used as explained above.
==== Alternative schemas ====
* If the file is corrupted, and not regenerated from a back-up, the only source of spot readings is the [[Standard_log_files|MMMyylog.txt]] files, and their interval might be only every half an hour (it has to be an exact fraction of an hour).
* As explained [[Monthly_log_files#Enhancement never implemented|here]] minima and maxima between such logging intervals are not recorded by Cumulus software
* Thus it is worth backing up this file, to another device than that running Cumulus, on a regular basis, probably a few times a week, to ensure this precious data is not lost if your device running Cumulus has a malfunction (or is damaged), or an electrical blip (or mistake by you) causes corruption to the original file,
 
Cumulus does periodically copy this file within the installation, but the copies are only kept for a limited time, and are on the same physical storage device, and so your main file is corrupted you might not be able to access the Cumulus back up or might not be able to go far back enough to find a file that has not been corrupted:
Of course you do not need to exactly mimic the log file with the schema in your database table, your weather station may not produce solar values so those fields in dayfile.txt need not be columns in your database table, or you may wish to add other values from external sensors or other log files.
* The file is backed up when MX is restarted into a date/time stamped sub-folder of the [[Backup folder|'''backup''' folder]]
*The file is also backed up (to a date/time stamped sub-folder within '''daily''' sub-folder of that backup sub-folder) during the end of day process, but (depending on the release you are running) the back-up copy may, or may not, include a line for the previous day (the line that is appended in the same end of day)
 
Retention of these back ups:
{{Version badge 1}}
* [[File:Badge vMx.png]] MX only keeps the last 9 of the date/time stamped sub-folders.
With Cumulus 1, you would need to be a programmer and write your own script to update the database table with your own schema. You might use the importCumulusFile article to start you off.
* [[File:Badge v1.png]] Legacy Cumulus 1 only keeps up to 8 of the date/time stamped sub-folders.
 
== Specific issues for MX ==
You might also, as I did, want your script to validate what it reads from the daily summary log to ensure only valid numbers and times are stored in your database table, while any invalid inputs are stored as nulls by your script. In my own case, my daily summary table has no solar columns but it does have several additional columns (including the daily increment of chill hours, the cumulative chill hours, the contents of the Weather Diary, the time of the last rain tip, wind bearings as compass characters (e.g. NNW) as well as numerical bearings). When I used Cumulus 1 I wrote a PHP script to find all these additional values, for example it reads the [[today.ini]] and [[month.ini]] log files as stored in the end of day backup (not the ones being updated for new day in data folder), and the [[log.xml|weather diary in log.xml in data folder]].
 
WARNING: It is important to note that some releases of MX are very fussy about consistency in all lines of '''dayfile.txt'''. Earlier releases tended to have better compatibility with the legacy software. Subsequent releases expected every line to be expressed exactly as specified in the locale. MX in its latest release is trying to cope better with inconsistent date separators.
[[File:Badge vMx.png]]
MX allows you to specify a different schema in the SQL it generates, but it does not offer that validation feature I just mentioned. I continue to use my Cumulus 1 script (with some changes as for example the weather diary works differently, I am querying SQLite from \CumulusMX\data\diary.db) now I use MX. In the MX standard functionality, you are limited to using web tags for your inputs, and some of those are affected by the end of day process. I tried various content in the custom EOD query, but it did not give me what I need for the scripts that produce my web pages.
 
Date field: Cumulus 1 (C1) did not care what character (or characters) separated the day, month, and year elements of the date field. MX insists that the same character (or characters), as defined in the locale, is used for all lines in file.
MX automatically stores all end of month figures as log files, a feature that Cumulus 1 and 2 lacked, but as yet it does not actually use this extra data, and provides no simple facility to put what is in these files into database tables. There is no end-of-month selection for updates in MX, so you can't easily get as much from dayfile.txt as I do.
 
Real number fields: MX uses the '''locale''' to decide what character (decimal comma or decimal point) separates integer and decimal parts of numbers. Every line of the file must be consistent in use of integer/decimal separator. C1 used the '''Region''' settings in Microsoft's Control Panel to determine how to store (and output) numbers for you, but (except if ''list separation character'' was comma) was fairly tolerant when reading old data in files. At the time of writing this, it was proposed the next major release will force this file to use decimal points (full stops not commas) regardless of locale. This proposal may or may not happen, the point is that information here might be incorrect for the release that you are using.
== When Cumulus is restarted after a break in running ==
 
Time-stamp fields: MX insists on HH:mm format being consistently used in every line of file, C1 did not care what (non-space, non-field separator) symbol separated the minutes from the hours.
* It reads the daily log and uses the rainfall totals for each day stored in the daily summary log to calculate the rainfall for this month, and this year/season (see [[FAQ#Where_does_Cumulus_get_its_this_month_and_this_year_rainfall_totals_from.3F|this Cumulus 1 FAQ]])
* Thus you must not have another process attempting access to the daily log when Cumulus is re-starting.
* For Cumulus 1, back ups of 8 selected log files including dayfile.txt that are copied to start-up folders in the 'cumulus\backup' folder, the last 8 start-up folders only are retained.
* For Cumulus MX, there are backups of 10 files, the extra ones are the weather diary and Cumulus.ini, that are copied to start-up folders in \CumulusMX\backup\, again there are only 9 kept, unless you back these up somewhere else.
 
Number of fields: The number of fields in the file increases in various versions as shown in [[#List_of_fields]].
== How you can use the daily log ==
* C1 will accept (as did Cumulus 2) any line with 15 to 45 fields in it. This is because the earliest version only stored 15 fields, as C1 was developed fields were added (as shown in field list) until there were 45 fields.
* Each release of MX expects a particular number of fields in each line of file; MX has added fields as the software has developed, and it even (as shown in field list) inadvertently added 2 fields later removed. The difference is that MX (for some functionality from release 3.4.5, for all functionality from release 3.9.5) reads the whole file into an internal (RAM held) array with a fixed number of elements, therefore every line ends up with same number of fields when written back into file.
** If you have some lines in your file that were created by an earlier release of Cumulus, and so have less than whatever is the current number of fields for the release you are using, there is a utility to run that will create a new dayfile.txt with all fields populated, please see [[Calculate Missing Values]] page. Please ensure you use the right version of the "Create Missing" utility mentioned on that page as it also get upgraded when fields are added, and it uses various software libraries contained within .dll files specific to a particular CumulusMX.exe release.
 
==How to view or edit this file==
* If you want to run scripts that use the daily log, it is best if you take a copy first, you can ask Cumulus 1 to take a copy after each update by using the '''Daily''' box in the bottom left of the ''Sites/Options'' frame within the ''Internet'' options screen from the '''Configuration''' menu; that will safely take a copy of 'dayfile.txt' after it is updated. This has the advantage it happens even if Cumulus has been stopped and restarted and rollover is happening during catch-up and so not at usual rollover time according to the computer clock. See Cumulus 1 '''Help''' for information on using this feature, I add a redirection ">daily_batch.log" in the parameter box alongside so that any output from running the command file I specify in the main box is sent to a log file overwritten in each run; this enables me to see the reason for any failure.
* Cumulus MX has option to list files to be transferred once a day as part of rollover, so you can use that to generate your extra copy. This has the advantage it happens even if Cumulus has been stopped and restarted and rollover is happening during catch-up.
* A third party toll "Cumulus Toolbox" can also be used to copy/transfer files at a particular time. Note this cannot tell whether Cumulus has done its rollover at the normal time, or during catch-up.
* There are other ways to specify that when a file changes it is copied somewhere.
*The system routines that Cumulus uses to access dayfile.txt require exclusive use of that file, so if you have any other process trying to access that file when Cumulus restarts, when Cumulus processes end of the (meteorological) day, or when a relevant option is selected from View or Edit menus, either your external process or the Cumulus process may fail.
 
The detailed information has been moved to [[Amending dayfile|viewing/editing '''dayfile.txt''' page]].
= Viewing or Editing the daily summary log =
 
An editor has been included within recent Cumulus releases of each flavour:
Both Cumulus 1 and 3 (2 did not) now provide editors where you can see what is in your dayfile.txt log, and if you click on a particular line you can edit the fields in that line, or indeed delete that line.
* [[File:Badge vMx.png]] Available from release 3.4.5 (13 Mar 2020): In [[MX_Administrative_Interface#The_Data_Log_Viewing_and_Editing_interface|the interface]] go to '''Data logs''' menu and select ''Dayfile''
* [[File:Badge v1.png]] Available from version 1.9.2 (5th October 2011) to final legacy release: On Main Screen from [[Cumulus_Screenshots#File.2FEdit.2FHelp_Menu|'''Edit''' menu]] select ''Dayfile.txt''
**'''Note for obsolete version 1.9.0 to 1.9.3:''' There is a bug in these versions in that 'Create missing' inserts 'heating and cooling degree day' values the wrong way round.
**'''Note for obsolete version 1.9.3 only:''' Create missing might in some cases be affected by a bug in 1.9.3 that can cause lines to be stored in incorrect date order (dayfile.txt uses dd.mm.yy, dd/mm/yy or dd-mm-yy, for its date field; and all lines should be in ascending chronological order)
**There are no known bugs for dayfile.txt handling in version 1.9.4 builds 1086 to 1101. Build 1099 is the standard stable final release of Cumulus 1 for most weather station types, 1100 and 1101 are for specific weather station types.
 
Please note that the editor in Cumulus 1 allows you to change the date, as well as all the other fields, although the lines must be kept in ascending date order to avoid errors when subsequently reading the file.
== Cumulus 1 ==
{{Version badge 1}}
'''This section applies to Cumulus 1.x.y only'''. The last command in '''Edit''' [[Cumulus_Screenshots#File.2FEdit.2FHelp_Menu |menu]] is ''dayfile.txt''. ''This is how you view'' the dayfile.txt from within Cumulus. This is a text editor, so you can type new values over those currently displayed, insert and delete rows, and it works best when at full screen. Click the ''Help'' button for detailed instructions. Cumulus Help is comprehensive.
 
The MX editor does not let you change the date, you can only change other fields or delete an entire line, so you have no control over the order of the lines in the file.
The Cumulus 1 editor provides a "Create Missing" option where it will, for any dates for which a line does not exist, create a line if it can from reading the [[Monthly log files|detailed log file]] to extract all values relevant to that day and do the necessary minimum/maximum/total/average calculation for each dayfile.txt field, storing the time from the relevant other log file in any time-stamp field in dayfile.txt. If a particular day does not exist as a row on the daily summary log, then 'create missing' can search the observations in the relevant monthly log, and calculate approximate highs, lows and totals to insert as an extra row in the daily summary log. These are approximate because the actual highs and lows for that day are quite likely to have occurred at moments in-between those that were logged. For ''Create missing'' a list of inserted records is produced in [[dayfileeditlog.txt]]. If just some fields are wrong in a particular row (meteorological day) on day file, then there is a [[Monthly_log_files#Using_Monthly_logs_to_deal_with_shorter_.28or_incomplete.29_dayfile.txt_records_for_particular_dates | work around]] as at all current versions (up to 1.9.4) you can only use 'Create missing' to read from the [[Monthly_log_files]] if the whole day (a line starting with that date) is missing in ''dayfile.txt''.
 
If there is an error in ''dayfile.txt'', then it is most likely to be found when you are viewing its data on one of the screens for editing the monthly, annual or all-time extremes. Cumulus 1 will illuminate its ''Error'' light if it finds an error in such cases and tell you the line/row number of the first found error, together with some details of the error it found. For example, if a row is blank, a row is duplicated, a field is corrupted, a field does not have an acceptable value, or a field is missing so subsequent fields are to the left of where they should be.
 
==Reading the file==
You can use this Cumulus 1 editor as follows:
*use '''insert''' key to add one or more missing rows (complete days) manually,
*correct individual values by over-typing,
*use '''delete''' key to remove an entire day (e.g. if you get a 'duplicate' error message),
*use '''Create missing''' button to insert missing rows (complete days) by reading from [[Monthly_log_files]] and automatically calculating the best approximations for each field for those missing days.
 
See [[Daily Summary]] page for a full discussion of ways, external to Cumulus, to read this file.
If you do have a 'duplicate' error, you need to decide which row to ''delete'', and whether to copy any values from that row into the row you are keeping to ensure the correct extremes are retained.
 
Apart from the viewing/editing options just described, Cumulus software reads this daily summary file in vaCumulus 1 does not actually number lines, however it does count lines as it reads them, so if there is an error when it reads the file, the original Cumulus will report the line number (numbering from 1) where it first found an error (line numbering uniquely identifies the line, even if a date is duplicated, or a line feed has been deleted so two lines are merged).rious other circumstances depending on the release you are running.
As an alternative to manual line ''insert'', you may wish to use a procedure for importing, and processing, pre-Cumulus observations into [[Monthly_log_files]]. Once there is data for required days in monthly logs, ''Create missing'' can insert the new rows for those days previously missing in dayfile.txt.
 
* [[File:Badge v1.png]] The legacy software only reads the file when the Cumulus user makes a specific request, in normal operation the existing content is ignored:
== Cumulus 2 ==
** The legacy Cumulus has a number of [[Cumulus_Screenshots#View_data|screens for viewing data for various periods]], to populate these screens Cumulus has to read all of the [[:Category:Files with Comma Separated Values|Files with Comma Separated Values]] as the derivatives shown generally do not match the extremes tracked in [[:Category:Ini Files|.Ini files]].
** The '''Select a graph''' feature also uses all of the [[:Category:Files with Comma Separated Values|Files with Comma Separated Values]].
** The end of day action uses a simple "append" instruction, so it does not need to read the file
* [[File:Badge vMx.png]] As already mentioned, MX reads the entire '''dayfile.txt''' file when it is first started into an internally held array. That internal copy was introduced in release 3.9.2 - b3097 (7 Dec 2020), it was needed to drive the [[Highcharts_-_Historic|'''historic charts functionality''']]; both in the [[MX Administrative Interface|interface]], and the example included [[New Default Web Site Information|Historic Charts web page]].
** From release 3.20.0 - b3200 (21 Aug 2022) there is a '''This Period Highs and Lows''' web page (accessed from ''Records'' menu) which is similar to the ''screens for viewing data for various periods'' except that the extremes it shows match those tracked in [[:Category:Ini Files|.Ini files]].
** From release 3.20.0 - b3200 (21 Aug 2022) there is an option to '''Reload dayfile''' in a ''Utils'' menu, this updates the internal held array by reading the file again; essential if an edit has been made to the file.
 
==Line numbering and Error messages==
Does not provide any viewing functionality.
 
Cumulus 1 does not actually number lines, however it does count lines as it reads them, so if there is an error when it reads the file, the original Cumulus will report the line number (numbering from 1) where it first found an error.
== Cumulus MX ==
 
Cumulus MX stores the contents of the file in an internal two dimensional array. The outer dimension is identified by numbering (from zero) what were lines in the file. The inner dimension has that line number as element zero, and the fields taken from file are therefore numbered from one.
'''Cumulus MX v3.0.0 (checked at build 3043) does not provide an editor'''
 
Obviously, line numbering uniquely identifies the line, even if a date is duplicated, or a line feed has been deleted so two lines are merged in the file. This is why you will see line numbers quoted in any error messages related to this file.
'''Version 3.4.5 - Build 3069 onwards provides an editor'''
 
Some of the editors you may use to view/edit the file may number the lines (in some cases always, in others as an option). If you have seen an error message, then to correct the file you need to use a tool that does number the lines in order to find where the correction is needed. Error messages report just the first error found, so check subsequent lines in case they have same error.
[[File:Badge vMx.png]]For Cumulus MX, when you select a line, both '''Edit''' and '''Delete''' buttons are enabled. Pick Edit, click that and an editing screen pops up, that does not let you change the line number nor the date, but all other fields show their current contents and you can overtype as necessary. Scroll down to see 2 buttons (how they are labelled depends on which version you are using), the left button ignores any edits you have made (it is 'cancel' even if it is labelled 'close'), and the right hand button saves your changes (even if it is labelled 'Edit').
 
= List of fields in dayfile.txt =
If you want to recalculate the values and time-stamp for any entry in dayfile.txt from reading the [[Monthly log files|detailed log file]] to extract all values relevant to that day and do the necessary minimum/maximum/total/average calculation, MX does not have that capability, but it can be done in a script if you are a programmer. I have done this, but it was not as easy as I thought, the log file you read from may have duplicate times potentially making the calculation harder, and you cannot edit the file as you go along, you basically rename the old file and create a new file with original name as you work through all days changing individual fields whenever you need to.
 
For your installed build please see ''[[dayfileheader.txt]]''. This file identifies all the fields in each line of the '''dayfile.txt''' file in the release you are running.
== Editing the file or other Manipulation outside Cumulus ==
 
That file has changed location from release 3.20.0 - b3200 (21 Aug 2022), it is now in [[data folder]], for Cumulus 1 and all earlier MX releases it was in same directory as the Cumulus executable.
{{Version badge 1}}Apart from bulk changes, Cumulus 1 made editing this log file quite easy. Although the create missing did not work where a line was present for the date, but an individual field needed to be corrected or populated, there was a [[Monthly_log_files#Using_Monthly_logs_to_deal_with_shorter_.28or_incomplete.29_dayfile.txt_records_for_particular_dates |work around]] for this.
 
As explained earlier, the number of fields in a line has (with one exception when fields were added in error) increased as the Cumulus software has been developed. The table below therefore groups the fields under labels that indicate which version/release introduced them.
[[File:Badge vMx.png]]The beta versions of MX did not include any feature to view or edit dayfile.txt, so any checking or editing had to take place outside the software. As mentioned above, MX does not provide any way to read, or calculate, values from any other file, nor will it do bulk edits. For any of these, you will need to take a copy of the Cumulus file and manipulate using a script or a spreadsheet processor. Do be careful not to change the encoding, the position of line feeds, the format of any field, the locale, or anything else that might stop MX being able to read the file.
 
==Field numbering==
 
The table below was first created when the only flavour of Cumulus software available was what we now call the legacy Cumulus 1. Back then the fields '''were''' numbered starting from zero. This reflected the way fields were identified when processed as elements of an single-dimension array variable representing a line.
The file is <tt>data\dayfile.txt</tt> within the directory holding the Cumulus executable, it can be viewed in a text editor, imported into various database systems, or imported into spreadsheets, to manipulate as you wish. Just remember that Cumulus reads it when it is restarted, and updates it as part of the rollover process, so never attempt to work on it either when Cumulus has just been restarted and is checking/updating (and possibly doing a rollover of logs), or around the midnight/9am/10am local rollover time when Cumulus is writing a new row.
 
The old numbering from zero had two advantages:
'''Tip''': Take a copy of the file before you do any edit outside Cumulus, so you can revert to old file.
# It stressed that the date field was different to the rest, all other fields were either values or time-stamps
# Numbering starting from zero is consistent with standard indexing used for arrays in programming languages (like JavaScript), so the number shown '''was''' the number to quote in any scripts where a Cumulus 1 line was converted to an array, and you needed to address a single field.
 
Please note the list of fields has been rewritten especially for MX. As part of the rewrite, the fields have been renumbered, in some forum posts you might see references to old numbering, in others to new numbering. As explained [[#Line numbering and Error messages|above]] the fields are now numbered starting from 1 to fit in with an internal array created when the log file is read, the processing code adds a line number in front of the date field on each array 'line' it holds.
'''Note''': Since new versions/builds can add to number of fields, Cumulus will accept lines of 15 fields or more (including without the more recent fields at the end). (Additions by versions are indicated below, you can explore details of earlier versions via the official [Software software/download] page).
 
== Information shown in the table ==
== Important Rules: ==
These notes were written for Cumulus 1, at the time this article was updated MX had not introduced any changes to the Cumulus 1 version of this daily log file, but check release notes in case that is no longer true in the future.
* The file must never be edited with a word processor, as they store many control and identification characters that prevent Cumulus correctly reading the values.
* It is recommended that you use either a specialised "Comma Separated Value" file editor or a text editor, both of these can be easily used. You can use a spreadsheet tool, but if you do, there may be a number of settings to change from their defaults to ensure the file remains in a readable format for Cumulus.
* All rows must ''start with date'' and include some of the parameters listed ''in correct sequence''.
* The file should be saved without "Byte Order Mark", specialised text editors will include a menu where you select the encoding and can select not to include BOM.
* The (meteorological) date format uses ''two digits for the year''. This is one reason why you need to edit this file using an editor that treats all fields as text (a text editor, a CSV editor, or a spreadsheet program that can be instructed ''not'' to recognise special field types). For software (e.g. Excel) with default of recognising formats, ensure that such recognition is turned off, as it is likely to change the dates to either a number representing days since e.g. 31 Dec 1899, or to change it to four figure years, and then Cumulus will no longer be able to use the log file.
* (Remember the month must be the middle figure in the date, USA convention cannot apply within logfiles). The separator between the three parts of the date should be a '-' hyphen or a '/' slash, it cannot be a space. Although, use of comma or point for separating parts of the date is allowed by Cumulus, it is not recommended as it can cause issues for subsequent edits.
** If you move your software to a new device, or you change from Cumulus 1 to Cumulus MX (or back), then you must ensure your dates still use the same separator, so all lines are consistent. Equally if you use any third-party packages like for example "Cumulusutils", the separator used in first line is assumed to be true for all lines. Some third-party tools have to be told what separator you use for dates.
* The fields are separated using the Windows (or whatever operating system you are using for MX) list separator (e.g. a comma or semi-colon)[[File:Open office (editing cumulus log files).png]] If you wish to use Excel, or to use "Calc" in 'Apache Open Office', "Libre Office", or similar, you may on opening the file need to pre-select the field separator you use (in this illustration comma is selected, but your file might use semi-colons between fields, don't select commas if your real numbers use comma between integer and decimal parts) and leave "Detect Special Numbers" (or whatever similar feature name your tool uses) unselected. Again third party packages processing dayfile.txt will need to recognise your field separator, and some may need to specify it.
* Rows can vary in length but only by missing off ''fields at the end''.
* Most value fields are in ''real number format x.y'' using your system decimal notation, a few (e.g. bearings, solar, humidity) are ''integers'' (see [[#List_of_fields_in_the_file]]). Whilst an integer can be used for a real number field, decimals are not allowed in an integer field.
* If you insert a ''lowest or highest value'' for a new day, where there was no record before, insert a ''time-stamp'' too, as a dayfile.txt row is only accepted by the Cumulus editor if each value has any related time-stamp. (Use a time-stamp of your rollovertime 00:00, 09:00 or 10:00 if you have not looked up the precise time). If you are using a 9am or 10am rollover time, create missing in Cumulus inserts 00:00 for null time-stamps, but normally Cumulus uses the rollover time for null time-stamps.
* Times appearing for some of the fields must always be in ''format HH:mm'' i.e. 2 digit hour, followed by a colon, then 2 digit minutes (Be aware you will have problems if you, or your editing software, add seconds). Except for wind gust (start of line), each time field will immediately follow the value for that parameter.
* Shorter lines can have multiple field separators added at end of row added either when editing within Cumulus or when editing using a spreadsheet tool. (during editing after all available valid parameters inserted, extra field separators may be added at end of shorter lines inserted by 'Create Missing' or by a spreadsheet as these make all lines end up with same number of fields)
* Nulls (2 field separators without something between them ',,') are thus allowed at end of line, but are not allowed within the part of the line with values and time-stamps. If you are editing out rogue values and if you do not know the value for a particular field within the line, then type in a zero or 9999 for nulls in integer format and an extreme with opposite value (e.g. -999.9 for a signed decimal maximum, and 9999.9 for a decimal minimum) for nulls in decimal format (replace the full stops with your decimal separator).
**Beware - if you do insert zero or an obviously wrong extreme value, Cumulus will display those in any editing screen where you wish to update the all-time, monthly-all-time, this month, or this year, extremes. This can make editing by picking values in logs harder.
**Cumulus itself will use zero for any parameters (e.g. solar) not provided by your station, and will repeat the last valid value if the station fails to send a value it should provide, so if a station fails to send a value for more than a day, dayfile.txt may show the same value as the previous day.
*** Note that Cumulus will stop if your station fails to send what it considers as a vital reading, like pressure or temperature, so the previous point does not apply in all cases.
**Some third-party scripts read the file to calculate averages or other statistics, and their authors suggest you remove rogue values (creating the ',,' that Cumulus objects to). You must never do this in the dayfile.txt that Cumulus processes. My suggestion is use the 'External Program' facility to create a copy of ''dayfile.txt'', make any such changes only on that copy, and set the third-party script to read this copy.
*** Alternatively, do as I do, clean your data as you upload the file into a database. I use a script with validation code checking for rogue values and recognising the -999.9 etc., in all cases my script will store a '''NULL''' value as default in the database table if that validation finds any obviously invalid figure.
* The row terminator for Windows is ''CR LF'', ensure any external editor does not change the two character terminator into a single character. Similar rules apply for terminators used by other operating systems, so be careful if you edit the file on a different device to that running Cumulus.
* Make sure that any editing does not create any ''blank lines'' in the file. Cumulus assumes an empty line means end of processing.
* Don't add a header line to the file, Cumulus expects all lines to be data lines.
 
* The date '''is supposed to''' be a unique identifier, the same date should not be repeated in another line, however Cumulus 1's editor allows you to change that date field.
=== Dealing with rogue measurements ===
** The dates, as mentioned earlier, should be in ascending order.
Cumulus provides via '''Configuration''' menu ''Calibration'' screen the ability to screen out spikes (magnitude of differences between one value read and next value read) in data picked up from your weather station. See Cumulus help screen if you decide to use that to cope with some spikes.
** Please see [[amending dayfile]] page for more information on dates
** Both Cumulus 1 and MX may get confused if you restart the software close to rollover time, and in that confused state they may create a second line with same date as a date already in the file.
** If you regularly restart Cumulus close to rollover time, then a whole sequence of dates can be repeated either as a block or as pairs.
* The remaining fields are all either numerical values, or a time paired with (except for first wind field) preceding numerical value.
** Cumulus 1 actually enforces this pairing (i.e. it validates that a time is present where it is needed). Cumulus MX only validates that each field is of correct type, it does not recognise any relationships between fields.
*The alphabetic column identifiers used by many spreadsheet editors are shown in the table
** IMPORTANT: If you do use a spreadsheet editor, do ensure '''all columns are set to "text" format''',
** Note that you will corrupt this file if you let your spreadsheet recognise content as dates or time, or let it change the number of decimal places.
* The type of field is shown in the table:
** Note you must not include a sign for an unsigned field,
** Note you can not specify a decimal comma/point in an integer field,
** Note all fields of type time must use 5 character "HH:mm" format, although Cumulus 1 will accept other separator characters where ":" shown.
* The field description is shown, together with references to where that terminology is explained
 
If you discover a rogue measurement (perhaps the wind affected your tipping bucket rain gauge or your weather station just reported a corrupted value), on the day it occured, see [[today.ini]] or a [[FAQ]] for further advice. In general, you need to stop Cumulus, edit the monthly log row containing the dodgy values, edit 'today.ini' and possibly other '.ini' files, looking up the logs indicated below that show the updates with previous high or low.
 
== Table listing Fields ==
If the rogue measurement is discovered some days after it occured, then in many cases it will have affected your highs and lows for the current month, month-by-month, current year, and/or all-time. As your first step you should update the appropriate field in the row for the affected date in dayfile.txt. Once ''dayfile.txt is correct'' the Cumulus editors will allow you to:
* update the highs and lows in [[Alltime.ini]] by choosing ''all time records'' from the '''Edit''' menu. See [[Alltimelog.txt]] for current and previous values to help you know what rogue value to hunt for and know what the high/low value was before the rogue affected it.
* update the highs and lows in [[year.ini]] by choosing ''This year's records'' from the '''Edit''' menu.
* update the highs and lows in [[month.ini]] by choosing ''This month's records'' from the '''Edit''' menu. See [[Diags]] for current and previous values of high or low in the current month or the immediate preceding month if the rogue was recorded less than 10 days ago.
* update the highs and lows month-by-month in [[monthlyalltime.ini]] by choosing ''Monthly records'' from the '''Edit''' menu. Click the ''Help'' button for specific instructions on using ''Reset'' and the two ''Copy'' column header buttons in this ''Monthly Records (Highs and Lows) Editor'' to action all rows.
* '' '''Note''' in each of above 4 editing screens you can:
*# see the currently stored extremes, and optionally ''Reset'' (row by row) to pre-editing value and timestamp.
*# load the dayfile.txt to view extremes derived from those figures (after your correction of the rogue values) and
*# optionally ''Copy'' (row by row) the logged values (and associated date/time information) into the relevant .ini file.
*# click the ''Help'' button for detailed instructions on using ''The Records (Highs and Lows) Editors''.
*# store your revised figures by clicking ''OK'' (or abandon all your edits by clicking ''Cancel'').
(Each of these screens is a text editor, and works best when at full screen).''
* create the relevant monthly and/or annual NOAA style report by choosing NOAA Monthly Report or NOAA Annual Report from the View menu, then select the required period using the selectors. Click the Update Display button to see various statistics (including mean temperature) calculated. Generation of complete NOAA reports takes most information from dayfile.txt (based on rollover to rollover meteorological days), except average wind speed and dominant wind direction (both of these it calculates from the monthly log files) for period in question. Finally press Save button to store the new or amended report.
Ideally, you will subsequently try to edit the rogue data for the particular time it was logged; see [[Monthly_log_files#Correcting_any_logged_data_problems]], but correcting the daily summary in dayfile.txt must always be the priority.
 
{| class="wikitable" border="1"
== Using the daily summary log on your web-site ==
|-
!style="width:50px" | Field number
!style="width:50px" | Spreadsheet column
!style="width:200px" | Field type
!style="width:600px" | Description
|-
|0
|Colspan="4" style="background: pink;"|For internal MX purposes, the zero field identifies a field that holds the line number. It is not actually stored as a field in the log file, but precedes any line exchanged via an application programming interface, and therefore is also included in an array representing all the fields in any log file line.
 
If you are processing this log file using a third party (or your own) script, that probably does not place the line number into any array, and your array elements will start at 0 for the field labelled 1 in this table, so putting all field numbers out by 1.
If you upload the log file to your web site then (with the help of JavaScript) you can read the log file to obtain information to show on a web page. You could have a web page that shows a today.htm like table for the last 7 days by combining reading Cumulus web tags with reading from the log file.
|-
|colspan="4" style="background:lightgray;"|Those fields included below have been in dayfile.txt from the start of Cumulus 1 (Version 1.0, the First release on 27th January 2004).
|-
|1
|A
|8 characters
|Date as ''2 figure day [separator] 2 figure month [separator] 2 figure year'' - the separator is that set in the windows system short date format (see [[setup]])
|-
|2
|B
|Unsigned number
|Highest wind [[Wind_measurement#Weather_Stations_and_Cumulus|gust]] speed
|-
|3
|C
|unsigned integer
|[[Wind_measurement#Wind_Direction | Bearing]] of highest wind gust
|-
|4
|D
|5 characters
|Time of highest wind gust
|-
|5
|E
|signed decimal
|Minimum [[Temperature_(and_humidity)_measurement#Cumulus_Calculated_Parameters | temperature]]
|-
|6
|F
|5 characters
|Time of minimum temperature
|-
|7
|G
|signed decimal
|Maximum temperature
|-
|Colspan="4" style="background: pink;"| Consistency Note: In some cases Minimum comes before Maximum, in other cases Maximum is before Mimum
|-
|8
|H
|5 characters
|Time of maximum temperature
|-
|9
|I
|Unsigned number
|Minimum [[Pressure_Measurement | sea level pressure]]
|-
|10
|J
|5 characters
|Time of minimum pressure
|-
|11
|K
|Unsigned number
|Maximum sea level pressure
|-
|12
|L
|5 characters
|Time of maximum pressure
|-
|13
|M
|unsigned number
|Maximum [[Rain_measurement#Rain_Rate | rainfall rate]]
|-
|14
|N
|5 characters
|Time of maximum rainfall rate
|-
|15
|O
|unsigned number
|Total rainfall for the day
|-
|colspan="4" style="background:lightblue;"|Above here represents the minimum length for every line, a count of 15 items
|-
|colspan="4" style="background:pink;"|[There is no record of which version added this next field. The Cumulus Support Forum, while it was hosted by Steve Loft, moved to new forum software (phpBBB3) on 2 Jun 2008, and started afresh without retaining any previous content. Therefore all announcements about the content of each build prior to version 1.7.9 were lost. All that can be deduced is that it was between versions 1.2.5 and 1.5.1 as these do not appear in the release history issued by Steve Loft. The first mention of it in the new forum was not until December 2008, but that was not about when it was released. A web tag for this variable was added in Build 978 of 1.9.1 beta, which was obviously long after it was first calculated.
 
Because of that, in "DataEditor.cs" (part of the source code that is compiled into CumulusMX.exe) this addition has "Extended for ???" as a comment]
Search the Cumulus support forum to see (for example) how others extract information from dayfile.txt to display on their web page a set of fields similar to those shown for 'Yesterday.htm' web page for other dates in the past, such as one year ago.
|-
|16
|P
|signed decimal
|[[Average temperature]] for the day
|-
|colspan="4" style="background:lightgray;"|(Wind run was added from version 1.8.4)
|-
|17
|Q
|unsigned number
|Daily [[Windrun | wind run]]
|-
|colspan="4" style="background:lightgray;"|(The next pair of entries were added from version 1.8.9 build 907 (June 2010) as part of a total redesign of how dayfile.txt was implemented in Cumulus 1)
|-
|18
|R
|unsigned number
|Highest [[Wind_measurement#Weather_Stations_and_Cumulus|Average Wind Speed]]
|-
|19
|S
|5 characters
|Time of Highest Avg. Wind speed
|-
|colspan="4" style="background:lightgray;"|(The two pairs of humidity entries were added in October 2010, a v 1.9.0 beta, the exact build number is now lost)
|-
|20
|T
|unsigned integer
|Lowest [[Temperature_(and_humidity)_measurement | humidity]]
|-
|21
|U
|5 characters
|Time of lowest humidity
|-
|22
|V
|unsigned integer
|Highest humidity
|-
|23
|W
|5 characters
|Time of highest humidity
|-
|colspan="4" style="background:lightgray;"|(The next two entries were added from version 1.9.0)
|-
|24
|X
|(not documented)
|Total evapotranspiration (Only valid for Davis stations, shows zero otherwise)
|-
|25
|Y
|unsigned
|Total hours of sunshine (only valid if sunshine sensor connected)
 
'''Important if rollover time is 9 am or 10 am:''' Most fields in this file are updated taking information from [[today.ini]]. For a non-midnight rollover, then the Sunshine hours reported here is from 00:01 on the calendar date corresponding to the date in the first field of this file, to subsequent midnight, and that end time is 9 or 10 hours before when this file is updated. Meanwhile, the sunshine hours count has been reset and so the figure in today.ini is not what is wanted here. For that reason the sunshine hours reported here are taken from [[yesterday.ini]].
If you use a script to read what is in the daily summary log file into a database table, or use the functionality in Cumulus MX to upload automatically to a database table, then see [[Daily_Summary]] article for information about ALL of the ways to show values from this database table.
|-
|colspan="4" style="background:lightgray;"|(The next 16 entries were added from version 1.9.1 May 2011)
|-
|26
|Z
|signed decimal
|High [[Heat index]] (added to Cumulus in 1.7.11 only as spot value, not stored)
|-
|27
|AA
|5 characters
|Time of high heat index
|-
|28
|AB
|Signed decimal
|High [[Apparent temperature]]
|-
|29
|AC
|5 characters
|Time of high apparent temperature
|-
|30
|AD
|signed decimal
|Low apparent temperature
|-
|31
|AE
|5 characters
|Time of low apparent temperature
|-
|32
|AF
|unsigned number
|High hourly rain
|-
|33
|AG
|5 characters
|Time of high hourly rain
|-
|34
|AH)
|signed decimal
|Greatest [[wind chill]] (high wind speed, low temperature) (calculated since version 1.8.3 as spot value, not stored)
|-
|35
|AI
|5 characters
|Time of greatest wind chill
|-
|colspan="4" style="background:lightgray;"|(The next two pairs for dew point were added in version 1.9.2 beta build)
|-
|36
|AJ
|signed decimal
|High [[Temperature_(and_humidity)_measurement#Cumulus_Calculated_Parameters | dew point]]
|-
|37
|AK
|5 characters
|Time of high dew point
|-
|38
|AL
|signed decimal
|Low dew point
|-
|39
|AM)
|5 characters
|Time of low dew point
|-
|colspan="4" style="background:lightgray;"|(The next three entries were added in version 1.9.2 Build 1004)
|-
|40
|AN
|unsigned integer
|Today's dominant/average wind direction
|-
|41
|AO
|unsigned decimal
|[[Heat/cold degree days and Chill hours | Heating degree days]]
|-
|42
|AP
|unsigned decimal
|[[Heat/cold degree days and Chill hours | Cooling degree days]]
|-
|colspan="4" style="background:lightgray;"|The next two pairs were added in legacy version 1.9.3 build 1036 (these only show valid values if appropriate sensors exist).
 
Fields listed up to those following here applied to the final legacy Cumulus 1.9.4 and formed the basis for early releases of Cumulus MX.
==Viewing summary figures for a month or period==
|-
To view a summary of dayfile.txt for a month, calendar year or selected period, use ''This month'' (choose any month, default is month from your computer system date), ''This year'' (choose any year, default is year from your computer system date), or ''This period'' (choose any start and end dates, default is yesterday calculated from your computer system date), within the '''View''' [[Cumulus_Screenshots#File.2FEdit.2FHelp_Menu|menu]].
|43
*Remember the daily summary log has its records based on rollover to rollover days.
|AQ
*In all cases they exclude the today details that are not stored on dayfile.txt until the end of day rollover.
|unsigned decimal
*If you use 9am or 10am rollover, and choose '''View''' ''This period'' between midnight and your 9am/10am rollover any day your latest meteorological day is the yesterday in terms of your computer system date that 'This period' tries to display as its default day, and the display will initially appear blank.
|High solar radiation
*If you use 9am or 10am rollover, and choose '''View''' ''This month'' before your 9am/10am rollover on the first day of a new calendar month your latest meteorological month is different to your computer system month 'This month' tries to display as its default month, and the display will initially appear blank.
|-
|44
|AR
|5 characters
|Time of high solar radiation
|-
|45
|AS
|unsigned decimal
|High UV Index
|-
|46
|AT
|5 characters
|Time of high UV Index
|-
|colspan="4" style="background:lightgray;"|The next two pairs were added in MX release 3.6.0, 2 more derived values and their times
|-
|47
|AU
|signed decimal
|High [[Feels Like]] temperature
|-
|48
|AV
|5 characters
|Time of high feels like temperature
|-
|49
|AW
|signed decimal
|Low Feels Like temperature
|-
|50
|AX
|5 characters
|Time of low feels like temperature
|-
|colspan="4" style="background:lightgray;"|The next two pairs were added in release 3.6.12
 
*Version 3.6.12 (build 3088) was an emergency release to cure serious problems in previous build 3087. It added the following 4 fields (2 values and their times).
Most of the displayed results are for observations in the daily summary log, but a few parameters are not in that log and are derived from the monthly logs (e.g. average wind speed) or the weather diary (e.g. count of days with snow lying).
**The 4 extra fields are left empty in this release, although you can add values and time-stamps using the dayfile editor.
*On the screen displayed after selecting ''This month'', you can change the month and year required using the options at bottom left, click ''Update Display'' and the revised summary will be calculated.
*From release 3.7.0 the first 2 of these 4 fields are populated, and the last 2 are removed, so I have labelled them as error.
*On the screen displayed after selecting ''This year'', you can change the year required using the options at bottom left, click ''Update Display'' and the revised summary will be calculated.
|-
*On the screen displayed after selecting ''This period'', you can change the start date and end date then click ''Update Display'' to get the equivalent calculations displayed for part of a month or any other period.
|51
|AY
|signed decimal
|High Canadian Humidity Index or [[Humidex]]
|-
|52
|AZ
|5 characters
| style="background:pink;"|Time of high Humidex
 
'''Bug for releases 3.13.0 to 3.14.2 inclusive''': The major code rewrite for release 3.13.0 replaced the previous code for the processing for all Cumulus files, the new code incorrectly stored ''Time of high feels like temperature'' in this field for all these releases! Corrected in minor code rewrite for 3.14.3 - b3163 25 Jan 2022 (not released to public until 3.15.0 - b3169 Released 31 Jan 2022)
 
|-
Note differences between observation reports on View screens and those available as web tags.
|colspan="4" style="background:lightblue;"|Just confirming that the next 2 fields were included by mistake in an emergency release (3.6.12), and are not included in any other version, so have labelled them as error.
*Date and time stamps:
|-
**The day number shown on screen is the meteorological day (changing at rollover and that may be at midnight or 9am/10am) as that date appears in dayfile.txt;
| 53 ('''error''')
**A time-stamp (with time and date) given in a web tag quotes a calendar date (always changing at midnight).
| BA
*Reported statistics example:
| signed decimal
**The screen shows total number of dry or wet days in the month;
| Labelled as Low Humidex, but not used, (appear in 3.6.12, but no other release)
**The web tags report longest dry or wet period in the month.
|-
 
| 54 ('''error''')
 
| BB
==List of fields in the file==
| 5 characters
'''The appropriate list of fields for your installed build is stored as ''dayfileheader.txt'' within the folder that contains your Cumulus executable.'''
| Labelled as Time of low Humidex, but not used, (appear in 3.6.12, but no other release)
 
|-
Listed below is the field number (starting from zero to be consistent with index used for arrays in programming languages like JavaScript, plus spreadsheet column identifier) with description and cross-references to further explanation:
|colspan="4" style="background:lightgray;"|The next value was added in release 3.12.0
* 00 (A): Date as ''2 figure day [separator] 2 figure month [separator] 2 figure year'' - the separator is that set in the windows system short date format (see [[setup]])
|-
* 01 (B): Highest wind [[Wind_measurement#Weather_Stations_and_Cumulus|gust]]
| 53 (new)
* 02 (C): [[Wind_measurement#Wind_Direction | Bearing]] of highest wind gust (integer)
| BA
* 03 (D): Time of highest wind gust
| unsigned decimal
* 04 (E): Minimum [[Temperature_(and_humidity)_measurement#Cumulus_Calculated_Parameters | temperature]]
| [[Heat/cold_degree_days_and_Chill_hours#Chill_Hours_and.2For_Air_Frost|Cumulative Chill Hours]] since start of season
* 05 (F): Time of minimum temperature
|-
* 06 (G): Maximum temperature
|colspan="4" style="background:lightgray;"|The next value and time fields were added in release 3.20.0
* 07 (H): Time of maximum temperature
|-
* 08 (I): Minimum [[Pressure_Measurement | sea level pressure]]
| 54
* 09 (J): Time of minimum pressure
| BB
* 10 (K): Maximum sea level pressure
| unsigned decimal
* 11 (L): Time of maximum pressure
| Highest rainfall total in (an approximate, as it depends upon timing of earlier entries in [[Recent history]]) 24 hour period ending in [[Meteorological day]]
* 12 (M): Maximum [[Rain_measurement#Rain_Rate | rainfall rate]]
|-
* 13 (N): Time of maximum rainfall rate
| 55
* 14 (O): Total rainfall for the day
| BC
(This point represents the minimum length of all records)
| 5 characters
* 15 (P): [[Average temperature]] for the day
| Time when (approximate) 24 hour period for rainfall total above ends
* 16 (Q): Total [[Windrun | wind run]]
|}
(The last two entries were added from v 1.8.9 build 907)
* 17 (R): Highest [[Wind_measurement#Weather_Stations_and_Cumulus|Average Wind Speed]]
* 18 (S): Time of Highest Avg. Wind speed
(Those two entries were added from v 1.9.0)
* 19 (T): Lowest [[Temperature_(and_humidity)_measurement | humidity]] (integer)
* 20 (U): Time of lowest humidity
* 21 (V): Highest humidity (integer)
* 22 (W): Time of highest humidity
* 23 (X): Total evapotranspiration (Only valid for Davis stations, shows zero otherwise)
* 24 (Y): Total hours of sunshine (only valid if sunshine sensor connnected)
* 25 (Z): High [[Heat index]]
* 26 (AA): Time of high heat index
* 27 (AB): High [[Apparent temperature]]
* 28 (AC): Time of high apparent temperature
* 29 (AD): Low apparent temperature
* 30 (AE): Time of low apparent temperature
* 31 (AF): High hourly rain
* 32 (AG): Time of high hourly rain
* 33 (AH): Low [[wind chill]]
* 34 (AI): Time of low wind chill
(The last 16 entries were added in version 1.9.1)
* 35 (AJ): High [[Temperature_(and_humidity)_measurement#Cumulus_Calculated_Parameters | dew point]]
* 36 (AK): Time of high dew point
* 37 (AL): Low dew point
* 38 (AM): Time of low dew point
(Last 4 entries added in version 1.9.2 beta build)
* 39 (AN): Today's dominant/average wind direction (integer)
* 40 (AO): [[Heat/cold degree days and Chill hours | Heating degree days]]
* 41 (AP): [[Heat/cold degree days and Chill hours | Cooling degree days]]
(These last three entries were added from 1.9.2 Build 1004)
 
Next, added in version 1.9.3 build 1036 (these only show valid values if appropriate sensors exist)
* 42 (AQ): High solar radiation
* 43 (AR): Time of high solar radiation
* 44 (AS): High UV Index
* 45 (AT): Time of high UV Index
 
Later added in version 3.6.0, 2 more derived values
* 46 (AU): High [[Feels Like]] temperature
* 47 (AV): Time of high feels like temperature
* 48 (AW): Low Feels Like temperature
* 49 (AX): Time of low feels like temperature
 
(Cumulus MX uses all fields as listed above)
 
==Example of the file==
 
An extract of a few lines of thea dayfile.txt
 
<pre>
07/08/11,17.7,342,13:24,12.9,05:47,24.1,14:53,1013.92,19:49,1016.43,09:36,0.0,00:00,0.0,18.4,19.1,6.3,14:06,48,12:45,89,05:36,3.30,9.0,24.1,14:53,24.6,15:48,13.3,05:47,0.0,00:00,12.9,05:47,14.6,15:52,10.7,11:33,11,1.6,1.7
</pre>
 
[[Category:Log Files]]
5,838

edits

Navigation menu