Cumulus Wiki

Cumulus.ini: Difference between revisions

Cumulus.ini (view source)

Revision as of 11:35, 14 June 2021

39,807 bytes added ,  11:35, 14 June 2021
m
→‎Optional Web Server: added
m (NOAA)
Line 1,275: Line 1,275:
|(no default)
|(no default)
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
|}
==Optional Web Server==
The settings listed here changed dramatically at both 3.10.0 and 3.12.0 releases, but they have gradually evolved throughout the development of MX.
FRom 3.12.0, MX can optionally either copy files to a web server you host or file transfer files to a commercial web server.
To implement (and customise) this web server functionality, there are many settings as listed alphabetically in this table.  The Internet settings page simplifies making settings by providing selections that amend multiple settings in a bulk operation:
* Some settings (marked ^ in table) are only displayed if you select '''I want to use the supplied default web site'''.
** For these settings, the "Generate" option is enabled in nearly all (see any qualifier) settings
** If you select "Enable file copy of standard files" (default is disabled) then those settings have their "Copy" option enabled in nearly all (see any qualifier) cases, and their "FTP Transfer" option deselected (instead of defaults shown in table)
** If you deselect "Enable file transfer of standard files" (default is enabled) then those settings have their "Copy" option disabled, and their "FTP Transfer" option enabled in nearly all (see any qualifier) cases (as per defaults shown in table)
* '''The default selections assume you have air quality, and solar, sensors; so you may need to disable some of the defaults the above selections have made'''
* If you don't select '''I want to use the supplied default web site''', then all the settings marked ^ are disabled
** This is what you want if you do not use the MX optional web server functionality
** If you have a customised  web site, you may want to select '''I want to use the supplied default web site'''  to see the settings that would otherwise all be disabled, and then pick any options that would be useful to you.
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | File Section
!style="width:100px" | Introduced
!style="width:100px" | Shown on Settings page?
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
| ActiveFTP=0
| [FTP site]
| Legacy Cumulus
| No
| Change directly in file as at release 3.11.x
| (n/a )
| *0 = Disabled (default)
*1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
|-
| Copy-airquality=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| airquality.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the airquality.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
|-
| Copy-alldailydegdaydata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings → Graph File Settings
| alldailydegdaydata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailydegdaydata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailyhumdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| alldailyhumdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailypressdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| alldailypressdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailyraindata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| alldailyraindata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailysolardata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| alldailysolardata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
| Copy-alldailytempdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| alldailytempdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailywinddata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| alldailywinddata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alltempsumdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| alldailytempsumdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempsumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-availabledata=0
| [FTP site]
| Release 3.12.0
| ^ (once only)
| Internet Settings →  Graph File Settings
| availabledata.json  → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-dailyrain=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| dailyrain.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-dailytemp=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| dailytemp.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailytemp.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-graphconfig=0
| [FTP site]
| Release 3.12.0
| ^ (once only)
| Internet Settings →  Graph File Settings
| graphconfig.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-humdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| humdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[humdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-pressdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| pressdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[pressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-raindata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| raindata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[raindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-solardata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| solardata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[solardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
| Copy-sunhours=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| sunhours.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[sunhours.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
|-
| Copy-tempdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| tempdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[tempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-wdirdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| wdirdata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-websitedata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings → Standard File Settings
| websitedata.json → Copy
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the resulting websitedata.json to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-winddata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings →  Graph File Settings
| winddata.json → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[winddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-wxnow=0
| [FTP site]
| Release 3.12.0
| ^ (disabled)
| Internet Settings → Standard File Settings
| wxnow.txt → Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| CopyMoonImage=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings → Moon Image
| Copy Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy moon image file to your local web server (need to select "Generate Moon Image" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-airquality=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| airquality.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the airquality.json file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alldailydegdaydata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailydegdaydata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailydegdaydata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alldailyhumdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailyhumdata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyhumdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alldailypressdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailypressdata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailypressdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alldailyraindata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailyraindata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyraindata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alldailysolardata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailysolardata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailysolarydata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
|-
| Create-alldailytempdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailytempdata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alldailywinddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailywinddata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailywinddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-alltempsumdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailytempsumdata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempsumdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-availabledata=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings →  Graph File Settings
| availabledata.json  → Generate
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[availabledata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-dailyrain=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| dailyrain.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailyrain.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-dailytemp=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| dailytemp.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-graphconfig=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings →  Graph File Settings
| graphconfig.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[graphconfig.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-humdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| humdata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[humdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-pressdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| pressdat.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[pressdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-raindata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| raindata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[raindata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-solardata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| solardata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[solardata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| dailytemp.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-sunhours=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| dailytemp.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
|-
| Create-tempdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| tempdata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[tempdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-wdirdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| wdirdata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[wdirdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-websitedata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| websitedata.json → Generate
| 1 (enabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to process the '''websitedataT.json''' file into websitedata.json
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-winddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| winddata.json → Generate
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[winddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-wxnow=0
| [FTP site]
| Release 3.10.0
| ^ (disabled)
| Internet Settings → Standard File Settings
| wxnow.txt → Generate
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to  generate a [[wsnow.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| DeleteBeforeUpload=0
| [FTP site]
| legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings → Web Settings → General Settings
* (release 3.12.0 onwards)  Internet Settings → Web Site → General Settings
| Delete before upload
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to delete existing file (with same name) on the web server before it creates the new file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (this is the option appropriate to most servers)
|-
| Directory=
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings → Web/FTP Site
| Remote FTP Directory
| (blank)
| Directory (including path) on your server to which FTP (if 'Enabled' is enabled) will upload the files.
*value is left Blank, default, the root position specified by ftp server
*A path from the starting point as the position specified by ftp server
Not used for ExtraRemoteNN parameters
|-
| DisableEPSV=0
| [FTP site]
| Beta Release 3.0.0  build 3045
| No
| Still Change directly in file as at release 3.11.x
| (n/a )
| 0
| *0 = Disabled (default)
*1 = Enabled, to use Extended Passive FTP-mode
|-
| DisableFtpsExplicit=0
| [FTP site]
| Release  3.4.0 - Build 3064
| No
| Change directly in file as at release 3.11.x
| (n/a )
| 0
| *0 = Disabled (default) use FTPS Explicit mode
*1 = Enabled, to use FTPS Implicit mode
|-
| Enabled=1
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "File Transfer" option enabled
| Internet Settings → Web/FTP Settings
| Enable file transfer of standard files
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to enable file transfer of standard files
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| EnableLocalCopy=0
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "Copy" option enabled
| Internet Settings →  Web/FTP Settings
| Enable file copy of standard files
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to  generate a [[wsnow.txt]] file and then copy that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| EnableRealtime=1
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings → Realtime Settings
| Enable Realtime
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a timer that will permit real time actions
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-airquality=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| airquality.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the airquality.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
|-
| Ftp-alldailydegdaydata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailydegdaydata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailydegdaydata.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-alldailyhumdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailyhumdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-alldailypressdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailypressdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-alldailyraindata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailyraindata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-alldailysolardata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailysolardata.json → File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
| Ftp-alldailytempdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailytempdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-alldailywinddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alldailywinddata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-alltempsumdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| alltempsumdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alltempsumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-availabledata=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings →  Graph File Settings
| availabledata.json  → File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-dailyrain=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| dailyrain.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-dailytemp=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| dailyrain.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-graphconfig=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings →  Graph File Settings
| graphconfig.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-humdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| humdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[humdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-pressdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| pressdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[pressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-raindata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| raindata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[raindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-solardata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| solardata.json → File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[solardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
| Ftp-sunhours=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| sunhours.json → File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[sunhours.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
| Ftp-tempdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| tempdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[tempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-wdirdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| wdirdata.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-websitedata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings → Standard File Settings
| websitedata.json → File Transfer
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the resulting websitedata.json to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-winddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings →  Graph File Settings
| dailyrain.json → File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-wxnow=0
| [FTP site]
| Release 3.10.0
| ^ (disabled)
| Internet Settings → Standard File Settings
| wxnow.txt → File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| ForumURL=
| [Web Site]
| Legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings → Web Site
* (release 3.12.0 onwards)  Internet Settings → Miscellaneous
| Forum URL
| (blank)
| Left blank to allow you to choose format
3.10.0 Default web pages use "<a href=\"https://cumulus.hosiene.co.uk/index.php\">forum</a>"
Some alternative URL examples:
*https://cumulus.hosiene.co.uk/index.php (for above example in default web pages)
*https://cumulus.hosiene.co.uk
*https://cumulus.hosiene.co.uk/search.php?search_id=active_topics
|-
| FTPlogging=0
| [FTP site]
| Legacy Cumulus
| No
| Change directly in file as at release 3.11.x
| (n/a)
| *0 = Disabled (default)
*1 = Enabled, Cumulus will for standard FTP mode add output to [[ftplog.txt]].
|-
| FTPRename=1
| [FTP site]
| Legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
* (release 3.12.0 onwards)  Internet Settings &rarr; Web Site &rarr; General Settings
| FTP rename
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
The chief advantage of using rename is that it minimises the time that the web server cannot serve a file (while it is being updated)
|-
| Host=
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Web/FTP Site
| Host name
| (blank)
| This is either the name, or the IP address, of the ftp server to which you connect when you upload pages to your web site.
|-
| IncludeMoonImage=1
| [FTP site]
| Release 3.5.0
| (always)
| Internet Settings &rarr; Moon Image
| Upload Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer moon image file to your local web server (need to select "Generate Moon Image" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| IntervalEnabled=1
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Interval Settings
| Enable web update interval
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a timer that will permit standard interval actions
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| LocalCopyFolder=
| [FTP site]
| Release 3.12.0
| (always)
| Internet Settings &rarr; Web/FTP Settings
| (blank)
| Folder (including path) to which MX will copy the standard files (see ^ for files) if 'EnableLocalCopy' is enabled
|-
| Password=
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Web/FTP Site
| Password
| (blank)
| The password for your FTP/SFTP/FTPS connection (masked out on settings page, shown in plain text in file)
|-
| Port=21
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Web/FTP Site
| FTP port
| 21 (plain FTP)
|you normally use either standard FTP (port=21), SSH for FTP i.e. SFTP (port=22), or SSL/TLS i.e.FTPS (port=990 normally, may be 25). If you get connection refused, messages in the MXdiags log, then you may need to try alternative protocol and/or alternative ports.
|-
| RealtimeFTPEnabled=0
| [FTP site]
| Legacy Cumulus
| ^
| Internet Settings &rarr; Realtime Settings
| Enable realtime FTP
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to be able to do file transfers at realtime interval
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeGaugesTxtCopy=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[SteelSeries_Gauges|realtimegauges.txt]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeGaugesTxtCreate=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt &rarr; Generate
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[SteelSeries_Gauges|realtimegauges.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeGaugesTxtFTP=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt &rarr; File Transfer
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[SteelSeries_Gauges|realtimegauges.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeInterval=45000
| [FTP site]
| Legacy Cumulus
| ^
| Internet Settings &rarr; Realtime Settings
| Realtime interval
| 45000 milliseconds (45 seconds)
| Enter interval time in seconds (decimals allowed), stored in file converted to milliseconds
|-
| RealtimeTxtCopy=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtime.txt
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[realtime.txt]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeTxtCreate=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtime.txt &rarr; Generate
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[realtime.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeTxtFTP=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtime.txt &rarr; File Transfer
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[realtime.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Sslftp=
| [FTP site]
| MX beta
| (always)
| Internet Settings &rarr; Web/FTP Site
| Select the FTP Protocol to use
| 0
| Drop down list:
* 0 = FTP (plain old FTP) - default
* 1 = Use SSL/TLS for FTP (FTPS)
* 2 = Use Secure Shell Home (SSH) for FTP (SFTP)
|-
| SshFtpAuthentication=Password
| [FTP site]
| Release 3.8.2 - build 3092
| Only if SFTP selected above
| Internet Settings &rarr; Web/FTP Site
| SFTP Authentication method
| Password
|Drop down list:
* 0 = Password
* 1 = Pre-shared key
* 2 = Password or pre-shared key
|-
| SshFtpPskFile=
| [FTP site]
| Release 3.8.2 - build 3092
| only if 1 or 2 selected in previous setting
| Internet Settings &rarr; Web/FTP Site
| Pre-shared Private Key file for SFTP
| (blank)
| Filename for your private PSK file, include the full path if the file is not in same folder as  CumulusMX.exe
|-
| UpdateInterval=60
| [FTP site]
| legacy software
| ^
| Internet Settings &rarr; Interval Settings
| Web interval
| 60
| Interval between standard web updates in minutes
|-
| Username=
| [FTP site]
| legacy software
| (always)
| Internet Settings &rarr; Web/FTP Site
| Username
| (blank)
| the user name for connecting to your server
|-
| UTF8encode=1
| [FTP site]
| legacy software
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
* (release 3.12.0 onwards)  Internet Settings &rarr; Web Site &rarr; General Settings
| UTF-8 encoding
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|WebcamURL=
| [Web Site]
| Legacy Software
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Site
* (release 3.12.0 onwards)  Internet Settings &rarr; Miscellaneous
| Webcam URL
| (blank)
| Can be used to add a link to any other web page, you have on any web server. In default web pages will be labelled as "web cam", but for your own web pages, this might lead to a home or blog page.
|}
|}
Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/9220"