Cumulus.ini: Difference between revisions

From Cumulus Wiki
Jump to navigationJump to search

Cumulus.ini (view source)

Revision as of 05:11, 14 June 2022

8,993 bytes added ,  05:11, 14 June 2022
m
no edit summary
m (Ready for update to cover new 3.12.0 beta releases in July 2021, and updates re other weather station types)
mNo edit summary
(36 intermediate revisions by 4 users not shown)
Line 1: Line 1:
<big>Please note this page was created 13 June 2021.
<big>Please note this page was created 13 June 2021.


At last update, it shows position as at beta build 3135.
At last update, it shows position as at beta build 3135, (missing some changes for the 3.12.0 release build of 3141).


This new page was created to reflect parameters added to Cumulus.ini in releases 3.8.0, 3.9.2, 3.10.0, and 3.12.0 (early beta builds - June 2021).  It excludes all parameters removed after release 3.7.0.</big>
This new page was created to reflect parameters added to Cumulus.ini in releases 3.8.0, 3.9.2, 3.10.0, and 3.12.0 (early beta builds - June 2021).  It excludes all parameters removed after release 3.7.0.</big>
Line 7: Line 7:
{{Template:WorkInProgressBanner}}
{{Template:WorkInProgressBanner}}
Since this page describes a file whose content frequently changes, this page may be out of date, unless somebody bothers to update it for every change.
Since this page describes a file whose content frequently changes, this page may be out of date, unless somebody bothers to update it for every change.
''Note that 3.12.0 (when first installed) apparently automatically rewrites this file, to remove some historic parameters, and to insert some new parameters, hopefully the release announcement will explain this.''


=Purpose of Cumulus.ini file=
=Purpose of Cumulus.ini file=
Line 22: Line 20:
* Control what is output to those destinations, to the extent that each can be configured
* Control what is output to those destinations, to the extent that each can be configured


== Why does this Wiki now contain multiple pages describing "Cumulus.ini"?==
 
 
= Why does this Wiki now contain multiple pages describing "Cumulus.ini"?=


[[Category:Configuration Files]]
[[Category:Configuration Files]]
Line 31: Line 31:


All the pages, previously called "Cumulus.ini", can be found from the owning [[:Category:Configuration Files|category]].  The original page was preserved at [[Cumulus.ini_(preserving_history)]] so look there for its editing history.  That page also expands on the above summary of why that old page was replaced by this new page.
All the pages, previously called "Cumulus.ini", can be found from the owning [[:Category:Configuration Files|category]].  The original page was preserved at [[Cumulus.ini_(preserving_history)]] so look there for its editing history.  That page also expands on the above summary of why that old page was replaced by this new page.
==Need to install MX 3.12.0 ==
If you are using Cumulus 1 or a release of MX earlier than 3.12.0, be aware that the content of "Cumulus.ini" is totally different to the file for later MX releases. (It might have been better had the file been given a new name in release 3.12.0).
The way the developer decided to implement it, is that when somebody installs release 3.12.0, any existing "Cumulus.ini" file is renamed, and a new "Cumulus.ini" file is created from scratch, and from then onwards all changes apply to the new file. As 3.12.0 is the only release that can create the replacement file, it is highly recommended that anybody currently using an older release, downloads 3.12.0 from [https://github.com/cumulusmx/CumulusMX/releases/download/b3141/CumulusMXDist3141.zip here] and runs that release for a while before upgrading to the latest release [https://github.com/cumulusmx/CumulusMX here].


== Simplifications ==
== Simplifications ==
Line 147: Line 153:
The MX software offers much functionality and flexibility.  Consequently, it has an extensive set of configuration settings, fortunately apart from the initial settings of model and units (see next sub-section), recent releases have simplified many of the settings for optional features by providing particular selections to affect a whole range of others (for predicted uses), instead of forcing you to individually work through every individual setting.
The MX software offers much functionality and flexibility.  Consequently, it has an extensive set of configuration settings, fortunately apart from the initial settings of model and units (see next sub-section), recent releases have simplified many of the settings for optional features by providing particular selections to affect a whole range of others (for predicted uses), instead of forcing you to individually work through every individual setting.


==First run of MX==
<big>Please see [[First Run of MX]] for how to set up settings when you first use MX.</big>
 
This Wiki page does not explain how to start using MX, please see [[MX on Linux]], [[MX on Windows OS]], and [[MX Administrative Interface]] as appropriate.
 
The key fact relevant here is that no Cumulus release distribution contains a '''Cumulus.ini''' file. So when you first use the software,  you will need to use the [[MX_Administrative_Interface#Changing_Settings|admin interface]] to enter all settings (some have defaults that might be right for you) as described later in this page, and that will lead to creation of the main configuration file.
 
# If you start Cumulus MX without a configuration file, and you have a screen attached so you can see the output from the engine, it will show this: [[File:MX first start.PNG]]
# As you can see, it is running, but it does not know what station type, so it cannot connect to it, and will not do anything more.
# At this stage, MX creates a very basic Cumulus.ini with the default settings (shown below).
#Open the [[MX Administrative Interface|admin interface]], and select the station settings if necessary: [[File:MX_station_settings.png|800px|center]]
# At the very minimum, you must select a station type and units (as shown in image here)
# Optionally, move down the page, entering more settings,
#* The settings that are displayed to you vary depending on the station type you have selected (and the particular MX release), so there is not a screenshot to show you the other settings for your station type.
# Optionally, move to other settings pages accessed from the menu seen in the image, these cover the optional functionality of MX, so the pages you need to visit depends on what functionality you wish to use.
# Optionally, use [[Samplestring.ini]] file as a guide to create a [[Strings.ini|strings.ini]] file (look up the cross reference if you want to do this now, but you can leave it to later) where you can tailor a number of texts that Cumulus produces.
#* The advantage of creating your '''strings.ini''' file now, is that it is read when MX starts, and we will shortly restart MX.
# Closing MX is the action that will create the main configuration file.
# MX must be stopped correctly, because it has to do a number of actions after it receives a request to close:
#* If you have a screen attached to the device running the MX engine, you can click in that screen and terminate Cumulus MX by typing '''C''' while holding down the control key (or equivalent if you are using an apple mac).
#* If you are connecting to MX from a remote device, then type into that remote session the control '''C'''.
#* Otherwise do whatever is needed to end the MX executable on your installation.
# Restart Cumulus MX, it will read your new settings (in '''Cumulus.ini''' and the optional '''strings.ini''') on re-starting, it will find the weather station, and start reading the weather data from it. On this first access to your weather station, it will not read any archive data (there is a way to modify [[today.ini]] so it can read what is in the separate logger), but from now (until you stop it) it will read (and from time to time log) the live data while MX remains running.


==What happens if I upgrade MX?==
==What happens if I upgrade MX?==
Line 273: Line 258:


As a specific example, release 3.11.0 added emailing capability; that requires quite a lot of new parameters to be added to the file.  You could use MX without these new parameters, but the Alarm Settings page would not allow you to click '''Enable''' until you had defined various settings on another Settings page, as well as on this Alarm Settings page.
As a specific example, release 3.11.0 added emailing capability; that requires quite a lot of new parameters to be added to the file.  You could use MX without these new parameters, but the Alarm Settings page would not allow you to click '''Enable''' until you had defined various settings on another Settings page, as well as on this Alarm Settings page.


=Tables listing Settings=
=Tables listing Settings=
Line 1,927: Line 1,910:
|-
|-
| LogExtraSensors=0
| LogExtraSensors=0
| (Depends on station type)
| (Depends on station type) Only from Release 3.12.0
| Station settings &rarr; Common Options
| Station settings &rarr; Common Options
| Extra sensors
| Extra sensors
Line 1,953: Line 1,936:
| RainDayThreshold=-1
| RainDayThreshold=-1
| (with warning: "Here be dragons!")
| (with warning: "Here be dragons!")
| legacy cumulus
| Only from Release 3.12.0
| Depends on release:
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
|-1 (that represents 0.2 mm or 0.01 inches)
| Rain day threshold
| -1 (that represents 0.2 mm or 0.01 inches)
| The amount of rainfall that must be collected before MX treats today as a wet day
| The amount of rainfall that must be collected before MX treats today as a wet day


''The intention is this will represent more than one tip,as the first tip might contain some rain from an earlier day''
''The intention is this will represent more than one tip, as the first tip might contain some rain from an earlier day''
|-
|-
| RolloverHour=0
| RolloverHour=0
Line 1,974: Line 1,956:
| SnowDepthHour=0
| SnowDepthHour=0
| (with warning: "Here be dragons!")
| (with warning: "Here be dragons!")
| legacy cumulus
| Only from Release 3.12.0
| Depends on release:
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.5.1 to 3.11.4) Manual edit of file
Line 2,005: Line 1,985:
| 1 (normal)
| 1 (normal)
| Tick box:
| Tick box:
* 0 = If "Daylight Saving Time" (DST) applies in Summer, MX is to use 9 am local time
* 0 = If "Daylight Saving Time" (DST) applies in Summer,
** If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
** If rollover time is 9 a.m., MX is to use 9 am local time, regardless of whether DST is in operation or not
* 1 = Normal behaviour:
* 1 = Normal behaviour:
** If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
** If rollover time is midnight, then rolls over at midnight local time, regardless of whether DST is in operation or not
Line 2,011: Line 1,993:
|}
|}


==Database==


==Debugging==


* Available from beta MX.
* Available from beta MX.
* File Section is [MySQL]
* File Section is [Station]
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Shown on Settings page?
!style="width:300px" | MX Section
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:600px" | Description
!style="width:600px" | Description
|-
|-
| CustomMySqlMinutesCommandString=
| Logging=1
| only if "Custom Minutes Enabled"
| Depends on release installed:
| MySQL Settings &rarr; Monthly log file upload
# Alternatives:
| SQL command
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: Logging = 1, then restart Cumulus MX.
| (blank)
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
| SQL to be obeyed at the interval defined in "CustomMySqlMinutesIntervalIndex"
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Debug logging
| 0 (disabled)
| This adds extra information about data transfers between your weather station and MX.
 
It was introduced originally for Davis stations only, but later (can someone insert here the relevant release) extended to cover more stations.
|-
|-
| CustomMySqlMinutesIntervalIndex=6
| DataLogging=1
| only if "Custom Minutes Enabled"
| Depends on release installed:
| MySQL Settings &rarr; Monthly log file upload
# Alternatives:
| Interval
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: DataLogging = 1, then restart Cumulus MX.
| 6 = 10 minutes
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
| Time between custom SQL uploads:
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
* 0 = 1 minute
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
* 1 = 2 minutes
| Debug logging
* 2 = 3 minutes
| 0 (disabled)
* 3 = 4 minutes
| This adds extra information about both data transfers initiated from MX, and all the internal MX processes.
* 4 = 5 minutes
|}
* 5 = 6 minutes
 
* 6 = 10 minutes
== Display Options ==
* 7 = 12 minutes
 
* 8 = 20 minutes
* File Section is '''[Display]'''
* 9 = 30 minutes
* MX Section is '''Station Settings &rarr; Display Options'''
* 10 = 1 hour (60 minutes)
{| class="wikitable" border="1"
|-
|-
| CustomMySqlMinutesEnabled=0
!style="width:30px" | Parameter Line Entry
| (always)
!style="width:100px" | Introduced
| MySQL Settings
!style="width:60px" | Label on Settings page
| Custom Minutes Enabled
!style="width:20px" | Default
| Not ticked (shown as 0 in Cumulus.ini)
!style="width:600px" | Description
| Enable the optional functionality to run SQL at a selected interval in minutes
|-
|-
| CustomMySqlSecondsCommandString=
| DisplaySolarData=0
| only if "Custom Seconds Enabled"
| ??? 3.10.0 ???
| MySQL Settings &rarr; Monthly log file upload
| Display Solar data
| SQL command
| Unticked (shown as 0 in Cumulus.ini)
| (blank)
| Simple tick or not
| SQL to be obeyed at the interval defined in "CustomMySqlSecondsInterval"
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display solar data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display solar data
|-
|-
| CustomMySqlSecondsInterval=10
| DisplayUvData=0
| only if "Custom Seconds Enabled"
| ??? 3.10.0 ???
| MySQL Settings &rarr; Monthly log file upload
| Display UV-I data 
| Interval
| Unticked (shown as 0 in Cumulus.ini)  
| 10 (seconds)
| Simple tick or not
| Time between custom SQL uploads
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display ultra-violet intensity data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
|-
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display UV intensity data
| CustomMySqlSecondsEnabled=0
| (always)
| MySQL Settings
| Custom Minutes Enabled
| Not ticked (shown as 0 in Cumulus.ini)
| Enable the optional functionality to run SQL at a selected interval in seconds
|-
|-
| Database=
| NumWindRosePoints=16
| when section opened
| Legacy Cumulus
| MySQL Settings &rarr; Server Details
| Number of wind rose points
| Database name
| 16
| (blank)
| Drop-down determining if weather station bearing supplied by weather station is to be converted to 8 or 16 compass directions (i.e. whether to include or exclude (in English) NNE, ENE, ESE, SSE, SSW, WSW, WNW, and NNW
| The name given to the database that includes the table(s) you want to update
* 8 points
* 16 points
Despite what it says in the hint on the settings page, leave at default whichever weather station type you use, unless this actually causes you a problem.  The parameter was introduced by Steve Loft.  Davis wind vanes use a potentiometer to measure wind direction so send Cumulus a bearing that can vary continuously between 1 and 360 degrees. Fine Offset wind vanes use magnetic switches that depend on the magnet under the moving part selecting two switches in the fixed part for the vane being exactly in-between compass directions, and selecting one switch for the main 8 directions and slightly away from the main directions; so they have a bias against sending Cumulus the in-between directions.
|-
|-
| DayfileMySqlEnabled=0
| UseApparent=1
| (always)
| ??? MX 3.6.0 or 3.10.0 ???
| MySQL Settings
| Use Apparent Temperature
| Dayfile Enabled
| Ticked (shown as 1 in Cumulus.ini)
| Not ticked (shown as 0 in Cumulus.ini)
| Simple tick or not
| Enable the automatic upload to the table named in "DayfileTable" within the database named in "Database"
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display apparent temperature in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus prior to release 3.6.0
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to display feels like temperature  in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus from release 3.6.0
|}
 
==Extra Web Files==
 
There are 100 occurrences of each parameter in Cumulus.ini, and therefore each parameter has a base name followed by numbers 0 to 99.
 
The settings interface presents the rows on multiple pages, the rows are not numbered, so you have to do some counting to work out which row in the admin interface page corresponds with which parameter in Cumulus.ini file.
 
'''You MUST restart MX after any changes in this section, before the new settings take effect.'''
 
{| class="wikitable" border="1"
|-
|-
| DayfileTable=Dayfile
!style="width:30px" | Parameter Line Entry
| when "Dayfile Enabled" is ticked and the next section is opened
!style="width:100px" | Label on Settings page
| MySQL Settings &rarr; Dayfile.txt upload
!style="width:20px" | Default
| Table name
!style="width:800px" | Description
| Dayfile
| Enables you to choose the name for the database table to be updated when "DayfileMySqlEnabled" is ticked
|-
|-
| Host=
|style="background:lightgray;"|[FTP site]
| when section opened
|
| MySQL Settings &rarr; Server Details
|
| Host name
|style="background:lightgray;"|Section name  
| (blank)
| Enter the database server name or Internet Protocol address
|-
|-
| MonthlyMySqlEnabled=0
|ExtraLocal0= to ExtraLocal99=
| (always)
|Local File Name
| MySQL Settings
|(empty)
| Monthly Log Enabled
|You can enter:
| Not ticked (shown as 0 in Cumulus.ini)
* A relative path name, with respect to the "CumulusMX" root folder
| Enable the automatic upload to the table named in "MonthlyTable" within the database named in "Database"
** e.g.  '''./data/dayfile.txt''' (Note: this is the [[Daily_Summary|daily summary log file]], see link for how it can be used on a web server)
** e.g. '''./webMX/betel_monthlyrecord_liteMXT.html''' (Note: this is a third party [[Cumulus_template_file|template file]] - see [https://cumulus.hosiene.co.uk/viewtopic.php?f=14&t=7500 Alternative Monthly Extremes using <#webtag>s]
** e.g. '''./web/trendsT.htm''' (Note: That file is not part of default web site any more, but serves as another example
* A full path name for a file on the computer running MX
** e.g. '''/home/pi/documents/myFile'''
** e.g. '''C:\Users\Public\Documents\working.txt'''
*You can place any of the following special tags into the entry
** These should be typed as shown on their own
*** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports 
***  '''<currentlogfile>''',  '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files  e.g. ExtraLocal3=<currentlogfile>
|-
|-
| MonthlyTable=Monthly
|ExtraRemote0= to ExtraRemote99=
| when "Dayfile Enabled" is ticked and the next section is opened
|Destination Filename
| MySQL Settings &rarr; Monthly log file upload
|(empty)
| Table name
|Defines where MX is to upload file to
| Monthly
* If file transfer is requested (see below), the file path should be expressed starting at the FTP/FTPS/SFTP root
| Enables you to choose the name for the database table to be updated when "MonthlyMySqlEnabled" is ticked
**I can't tell you what the file path is for your web server, but I can give a couple of examples to steer you
|-
*** e.g. httpdocs/dayfile.txt
| Pass=
*** e.g. public_html/thismonthyear.htm
| when section opened
* If the FTP is not ticked, the file path should be full path for a file on the computer running MX
| MySQL Settings &rarr; Server Details
** e.g. /var/www/html/weather/images/moon.png could be destinatation for uploading the MX generated moon image to a Linux hosted [[Your_Own_Server|server]]
| Password
** e.g. /var/www/html/weather/webfilesMX/tempdata.json for uploading one of the [[:Category:JSON_Files|files with graph data]] to a Linux hosted [[Your_Own_Server|server]]
| (blank)
*You can place any of the following special tags into the entry
| Enter the password needed to access the database server specified in "Host"
** These should be typed as shown as part of the destination path, note that they can be used:
|-
*** either to represent the final filename part of the path e.g. ExtraRemote3=/var/www/html/weather/monthly/<currentlogfile>
| Port=3306
*** or to modify a filename, so it becomes unique to a particular month e.g. ExtraRemote0=/var/www/html/weather/cumulus_generated/savedFiles/web_tags_real_time_<currentlogfile>.inc
| when section opened
** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports
| MySQL Settings &rarr; Server Details
**  '''<currentlogfile>''',  '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files
| Port
| 3306
| Enter the port used to access the database server
|-
| RealtimeMySql1MinLimit=0
| When section opened
| MySQL Settings &rarr; Raltime.txt upload
| Limit real time table inserts to once a minute 
| Not ticked (shown as 0 in Cumulus.ini)
| Enable the optional functionality to limit database uploads, if your real time interval has been set to less than 60 seconds
|-
| RealtimeMySqlEnabled=0
| (always)
| MySQL Settings
| Realtime enabled
| Not ticked (shown as 0 in Cumulus.ini)
| Enable the automatic upload to the table named in "RealtimeTable" within the database named in "Database"
|-
|-
| RealtimeRetention=
|ExtraProcess0= to ExtraProcess99=
| When section opened
|Process
| MySQL Settings &rarr; Raltime.txt upload
|0
| '''Data Retention value''' and '''Data Retention unit'''
|Simple tick or not
| "7" and "Days"
* Tick (value shown as 1 in Cumulus.ini) if the local file is a [[Cumulus_template_file|template file]], see [[Customised_templates#What_is_meant_by_.27Cumulus_processes_templates.27|here]] for full explanation of '''Process'''
| The value field will take any number, the unit field is a dropdown:
* Don't tick (value shown as 0 in Cumulus.ini) if you want local file uploaded with existing content
* Seconds
* Minutes
* Hours
* Days
* Weeks
* Months
Taken together, these determine the period for which rows are kept in the table named in "RealtimeTable", any row older than this specification will be deleted as part of the automatic SQL
|-
|-
| RealtimeTable=Realtime
|ExtraRealtime0= to ExtraRealtime99=
| When section opened
|Realtime
| MySQL Settings &rarr; Raltime.txt upload
|0
| Table name
|Simple tick or not
| Realtime
*Tick (value shown as 1 in Cumulus.ini) if
| Enables you to choose the name for the database table to be updated when "RealtimeMySqlEnabled" is ticked
*# See [[#Realtime Settings]], you must have "Enable realtime" ticked, and defined an interval there
*# Uploads the file to destination specified at interval defined
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
|-
|-
| User=
|ExtraFTP0= to ExtraFTP99=
| when section opened
|FTP
| MySQL Settings &rarr; Server Details
|1
| User name
|Simple tick or not
| (blank)
*Tick (value shown as 1 in Cumulus.ini) if you want MX to use the FTP protocol specified in [[#Web/FTP Site]]
| Enter the username associated with "Pass"
* Don't tick (value shown as 0 in Cumulus.ini) if the remote file is on the computer running MX and a simple Copy File is required
|-
|ExtraUTF0= to ExtraUTF99=
|UTF-8
|1
|Please see [[Reports_folder#Encoding|technical guidance on encoding]]
*Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters
*If unticked (0 appears in file), then iso-8859-1 encoding is used
|-
|ExtraBinary0= to ExtraBinary99=
|Binary
|0
|Simple tick or not
*Tick (value shown as 1 in Cumulus.ini) if your file is e.g. an image file (e.g. moon.png)
* Don't tick (value shown as 0 in Cumulus.ini) if the file is text, HTML, PHP script, JSON, JavaScript
|-
|ExtraEOD0= to ExtraEOD99=
|End of Day
|0
|Simple tick or not
*Tick (value shown as 1 in Cumulus.ini) if your file is to be uploaded during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
|}
|}


==Debugging==
== Location==


* Available from beta MX.
* Introduced for legacy Cumulus
* File Section is [Station]
* File Section is [Station]
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:300px" | MX Section
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:600px" | Description
!style="width:600px" | Description
|-
|-
| Logging=1
| Altitude=0
| Depends on release installed:
| Station Settings &rarr; Location
# Alternatives:
| Altitude
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: Logging = 1, then restart Cumulus MX.
| 0
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
| The height above mean sea level where the (pressure) sensor is positioned
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Debug logging
| 0 (disabled)
| This adds extra information about data transfers between your weather station and MX.
 
It was introduced originally for Davis stations only, but later (can someone insert here the relevant release) extended to cover more stations.
|-
|-
| DataLogging=1
| AltitudeInFeet=1
| Depends on release installed:
| Station Settings &rarr; Location
# Alternatives:
| Altitude Units
#* (Releases 3.0.0 to 3.9.8) Close Cumulus MX, then edit Cumulus.ini configuration file, and add a line in the [Station] section: DataLogging = 1, then restart Cumulus MX.
| Default depends on release:
#* (Releases 3.1.0 to 3.9.3) Station Settings &rarr Options
# Legacy until 3.11.4: 1 (labelled as feet)
# (Release 3.9.4 to 3.11.4) Program Settings &rarr; Program General Options
# From 3.12.0: 0 (labelled metres)
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| Radio Setting
| Debug logging
* feet  (value shown as 1 in Cumulus.ini)
| 0 (disabled)
* metres (value shown as 0 in Cumulus.ini)
| This adds extra information about both data transfers initiated from MX, and all the internal MX processes.
|}
 
== Display Options ==
 
* File Section is '''[Display]'''
* MX Section is '''Station Settings &rarr; Display Options'''
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
| LocName=
!style="width:100px" | Introduced
| Station Settings &rarr; Location
!style="width:60px" | Label on Settings page
| Name
!style="width:20px" | Default
| (empty)
!style="width:600px" | Description
| A short name for the location
|-
|-
| DisplaySolarData=0
| LocDesc=
| ??? 3.10.0 ???
| Station Settings &rarr; Location
| Display Solar data
| Description
| Unticked (shown as 0 in Cumulus.ini)
| (empty)
| Simple tick or not
| A longer description for the location
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display solar data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display solar data
|-
|-
| DisplayUvData=0
| "Latitude=0" and "LatTxt="
| ??? 3.10.0 ???
| Station Settings &rarr; Location &rarr; Latitude
| Display UV-I data 
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; North or South"
| Unticked (shown as 0 in Cumulus.ini)  
| (blank)
| Simple tick or not
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display ultra-violet intensity data in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards)
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to suppress the table cells that would display UV intensity data
|-
|-
| NumWindRosePoints=16
| "Longitude=0" and "LongTxt="
| Legacy Cumulus
| Station Settings &rarr; Location &rarr; Longitude
| Number of wind rose points
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; East or West"
| 16
| (blank)
| Drop-down determining if weather station bearing supplied by weather station is to be converted to 8 or 16 compass directions (i.e. whether to include or exclude (in English) NNE, ENE, ESE, SSE, SSW, WSW, WNW, and NNW
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
* 8 points
|}
* 16 points
 
Despite what it says in the hint on the settings page, leave at default whichever weather station type you use, unless this actually causes you a problem.  The parameter was introduced by Steve Loft.  Davis wind vanes use a potentiometer to measure wind direction so send Cumulus a bearing that can vary continuously between 1 and 360 degrees. Fine Offset wind vanes use magnetic switches that depend on the magnet under the moving part selecting two switches in the fixed part for the vane being exactly in-between compass directions, and selecting one switch for the main 8 directions and slightly away from the main directions; so they have a bias against sending Cumulus the in-between directions.
 
|-
==Optional Report Settings==
| UseApparent=1
 
| ??? MX 3.6.0 or 3.10.0 ???
* File Section is [NOAA]
| Use Apparent Temperature
{| class="wikitable" border="1"
| Ticked (shown as 1 in Cumulus.ini)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want MX to display apparent temperature in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus prior to release 3.6.0
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to display feels like temperature  in tables shown on the [[New_Default_Web_Site_Information|web pages]] provided in [[Webfiles folder|webfiles folder]] (from release 3.10.0 onwards) for consistency with Cumulus from release 3.6.0
|}
 
==Extra Web Files==
 
There are 100 occurrences of each parameter in Cumulus.ini, and therefore each parameter has a base name followed by numbers 0 to 99.
 
The settings interface presents the rows on multiple pages, the rows are not numbered, so you have to do some counting to work out which row in the admin interface page corresponds with which parameter in Cumulus.ini file.
 
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Label on Settings page
!style="width:100px" | Introduced
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:800px" | Description
!style="width:300px" | Description
|-
|-
|style="background:lightgray;"|[FTP site]
| AutoCopy=0
|
| Release 3.12.0
|
| NOAA Reports Settings &rarr; FTP Options
|style="background:lightgray;"|Section name
| Auto Copy NOAA report files
| 0 (disable)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if your report is to be copied to copy directory during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
* Don't tick (value shown as 0 in Cumulus.ini) for no copy action
|-
|-
|ExtraLocal0= to ExtraLocal99=
| AutoFTP=0
|Local File Name
| First with Cumulus 2
|(empty)
| NOAA Reports Settings &rarr; FTP Options
|You can enter:
| Auto transfer NOAA report files
* A relative path name, with respect to the "CumulusMX" root folder
| 0 (disable)
** e.g.  '''./data/dayfile.txt''' (Note: this is the [[Daily_Summary|daily summary log file]], see link for how it can be used on a web server)
| Simple tick or not
** e.g. '''./webMX/betel_monthlyrecord_liteMXT.html''' (Note: this is a third party [[Cumulus_template_file|template file]] - see [https://cumulus.hosiene.co.uk/viewtopic.php?f=14&t=7500 Alternative Monthly Extremes using <#webtag>s]
* Tick (value shown as 1 in Cumulus.ini) to enable the file transfer process you have defined for MX, to upload the file for you (at first update time after rollover has completed)
** e.g. '''./web/trendsT.htm''' (Note: That file is not part of default web site any more, but serves as another example
* Don't tick (value shown as 0 in Cumulus.ini) to disable any file transfer process
* A full path name for a file on the computer running MX
** e.g. '''/home/pi/documents/myFile'''
** e.g. '''C:\Users\Public\Documents\working.txt'''
*You can place any of the following special tags into the entry
** These should be typed as shown on their own
*** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports 
***  '''<currentlogfile>''',  '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files  e.g. ExtraLocal3=<currentlogfile>
|-
|-
|ExtraRemote0= to ExtraRemote99=
| AutoSave=1
|Destination Filename
| First with Cumulus 2
|(empty)
| NOAA Reports Settings
|Defines where MX is to upload file to
| Create NOAA files after daily rollover
* If file transfer is requested (see below), the file path should be expressed starting at the FTP/FTPS/SFTP root
**I can't tell you what the file path is for your web server, but I can give a couple of examples to steer you
*** e.g. httpdocs/dayfile.txt
*** e.g. public_html/thismonthyear.htm
* If the FTP is not ticked, the file path should be full path for a file on the computer running MX
** e.g. /var/www/html/weather/images/moon.png could be destinatation for uploading the MX generated moon image to a Linux hosted [[Your_Own_Server|server]]
** e.g. /var/www/html/weather/webfilesMX/tempdata.json for uploading one of the [[:Category:JSON_Files|files with graph data]] to a Linux hosted [[Your_Own_Server|server]]
*You can place any of the following special tags into the entry
** These should be typed as shown as part of the destination path, note that they can be used:
*** either to represent the final filename part of the path e.g. ExtraRemote3=/var/www/html/weather/monthly/<currentlogfile>
*** or to modify a filename, so it becomes unique to a particular month e.g. ExtraRemote0=/var/www/html/weather/cumulus_generated/savedFiles/web_tags_real_time_<currentlogfile>.inc
** '''<noaayearfile>''' and '''<noaamonthfile>''' these respectively represent latest yearly and latest monthly reports
**  '''<currentlogfile>''',  '''<currentextralogfile>''', and '''<airlinklogfile>''' these respectively represent [[Standard_log_files|standard]], [[Extra_Sensor_Files| extra sensor]], and [[Air_Link_Log.txt|Davis AirLink air quality monitor]] log files
|-
|ExtraProcess0= to ExtraProcess99=
|Process
|0
|0
|Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if the local file is a [[Cumulus_template_file|template file]], see [[Customised_templates#What_is_meant_by_.27Cumulus_processes_templates.27|here]] for full explanation of '''Process'''
* Tick (value shown as 1 in Cumulus.ini) if you want MX to use the (optional) Reports functionality
* Don't tick (value shown as 0 in Cumulus.ini) if you want local file uploaded with existing content
* Don't tick (value shown as 0 in Cumulus.ini) if MX Reports functionality not required
|-
|-
|ExtraRealtime0= to ExtraRealtime99=
| City=
|Realtime
| First with Cumulus 2
|0
| NOAA Reports Settings &rarr; Site Details
|Simple tick or not
| City
*Tick (value shown as 1 in Cumulus.ini) if
| (empty)
*# See [[#Realtime Settings]], you must have "Enable realtime" ticked, and defined an interval there
| Enter here your hamlet, village, town, or city, name
*# Uploads the file to destination specified at interval defined
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
|-
|-
|ExtraFTP0= to ExtraFTP99=
| CoolingThreshold=22
|FTP
| First with Cumulus 2
|1
| NOAA Reports Settings &rarr; Thresholds
|Simple tick or not
| Cooling threshold
*Tick (value shown as 1 in Cumulus.ini) if you want MX to use the FTP protocol specified in [[#Web/FTP Site]]
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
* Don't tick (value shown as 0 in Cumulus.ini) if the remote file is on the computer running MX and a simple Copy File is required
| [[Heat/cold_degree_days_and_Chill_hours#Cold_Degree_Days|Cold Degree Days]] are a measure of the need to cool the air to make it more comfortable,  based on time above, and temperature difference above, a threshold temperature. An international standard says 22 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
|-
|-
|ExtraUTF0= to ExtraUTF99=
| CopyDirectory=
|UTF-8
| Release 3.12.0
|1
| NOAA Reports Settings &rarr; Report Options
|Please see [[Reports_folder#Encoding|technical guidance on encoding]]
| Copy Directory
*Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters
| (empty)
*If unticked (0 appears in file), then iso-8859-1 encoding is used
| The folder on the web server you host to which reports are to be copied
|-
|-
|ExtraBinary0= to ExtraBinary99=
| FTPDirectory=
|Binary
| First with Cumulus 2
|0
| NOAA Reports Settings &rarr; FTP Options
|Simple tick or not
| destination folder
*Tick (value shown as 1 in Cumulus.ini) if your file is e.g. an image file (e.g. moon.png)
| Depends on release:
* Don't tick (value shown as 0 in Cumulus.ini) if the file is text, HTML, PHP script, JSON, JavaScript
* (3.1.0 to 3.11.4) blank
* (3.12.0 onwards) to match change in default web site script specification of '''Reports''' folder
| Specify the destination folder for file transfer to, on your FTP server
*Leave at default (for your release) and MX will work with the default web pages script supplied (at same release)
* Specify a folder relative to FTP root, and MX will upload reports to that folder instead (you are then responsible for writing any script on your web site to find each report and do any processing).
|-
|-
|ExtraEOD0= to ExtraEOD99=
| HeatingThreshold=15.5
|End of Day
| First with Cumulus 2
|0
| NOAA Reports Settings &rarr; Thresholds
|Simple tick or not
| Heating threshold
*Tick (value shown as 1 in Cumulus.ini) if your file is to be uploaded during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
* Don't tick (value shown as 0 in Cumulus.ini) if you want uploading to happen at a different interval (e.g. [[#Interval Settings|Standard interval]])
|[[Heat/cold_degree_days_and_Chill_hours#Heat_Degree_Days| Heating Degree Days]] are a measure of the need for heating, based on time below, and temperature difference below, a threshold temperature. An international standard says 15.5 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
|}
 
== Location==
 
* Introduced for legacy Cumulus
* File Section is [Station]
 
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
| MaxTempComp1=22
!style="width:100px" | MX Section
| First with Cumulus 2
!style="width:60px" | Label on Settings page
| NOAA Reports Settings &rarr; Thresholds
!style="width:20px" | Default
| Max temp comparison 1
!style="width:600px" | Description
| (empty)
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the cooling degree day threshold in Celsius. Express in Fahrenheit if that is your chosen unit
|-
|-
| Altitude=0
| MaxTempComp2=0
| Station Settings &rarr; Location
| First with Cumulus 2
| Altitude
| NOAA Reports Settings &rarr; Thresholds
| 0
| Max temp comparison 2
| The height above mean sea level where the (pressure) sensor is positioned
| (empty)
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
|-
|-
| AltitudeInFeet=1
| MinTempComp1=15.5
| Station Settings &rarr; Location
| First with Cumulus 2
| Altitude Units
| NOAA Reports Settings &rarr; Thresholds
| Default depends on release:
| Min temp comparison 1
# Legacy until 3.11.4: 1 (labelled as feet)
# From 3.12.0: 0 (labelled metres)
| Radio Setting
* feet  (value shown as 1 in Cumulus.ini)
* metres (value shown as 0 in Cumulus.ini)
|-
| LocName=
| Station Settings &rarr; Location
| Name
| (empty)
| (empty)
| A short name for the location
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the heating degree day  threshold in Celsius. Express in Fahrenheit if that is your chosen unit
|-
|-
| LocDesc=
| MinTempComp2=0
| Station Settings &rarr; Location
| First with Cumulus 2
| Description
| NOAA Reports Settings &rarr; Thresholds
| Min temp comparison 2
| (empty)
| (empty)
| A longer description for the location
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
|-
|-
| "Latitude=0" and "LatTxt="
| MonthFileFormat='NOAAMO'MMyy'.txt'
| Station Settings &rarr; Location &rarr; Latitude
| First with Cumulus 2
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; North or South"
| NOAA Reports Settings &rarr; Output Files
| (blank)
| Monthly filename format
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
| 'NOAAMO'MMyy'.txt' (note quotes round '''NOAAMO''' and round '''.txt''')
|-
| Here you specify the filename template for MX to use when reading, or writing, monthly reports
| "Longitude=0" and "LongTxt="
| Station Settings &rarr; Location &rarr; Longitude
| "Degrees", "Minutes", "Seconds", and "Hemisphere &rarr; East or West"
| (blank)
| The selections made on this Settings Page sub-section will place the appropriate content in the two parameters in the file
|}


==Optional Report Settings==
There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension.  e.g. "NOAAMO"MMMyyyy".txt" would also be valid.
 
* File Section is [NOAA]
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
| Name=Personal Weather Station
!style="width:100px" | Introduced
| First with Cumulus 2
!style="width:100px" | MX Section
| NOAA Reports Settings &rarr; Site Details
!style="width:60px" | Label on Settings page
| Site Name
!style="width:20px" | Default
| (empty)
!style="width:300px" | Description
| What you would like to see in report title for your station name
|-
|-
| AutoCopy=0
| NOAAUseUTF8=1
| Release 3.12.0
| NOAA Reports Settings &rarr; FTP Options
| Auto Copy NOAA report files
| 0 (disable)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if your report is to be copied to copy directory during the [[MX_Basic_info#MX_End_of_Day_Process|End of Day process]]
* Don't tick (value shown as 0 in Cumulus.ini) for no copy action
|-
| AutoFTP=0
| First with Cumulus 2
| First with Cumulus 2
| NOAA Reports Settings &rarr; FTP Options
| NOAA Reports Settings &rarr; Report Options
| Auto transfer NOAA report files
| Use UTF-8 encoding
| 0 (disable)
| 1 (UTF-8)
| Simple tick or not
| Please see [[Reports_folder#Encoding]]
* Tick (value shown as 1 in Cumulus.ini) to enable the file transfer process you have defined for MX, to upload the file for you (at first update time after rollover has completed)
* Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters, including the <sup>o</sup> degree symbol
* Don't tick (value shown as 0 in Cumulus.ini) to disable any file transfer process
* If unticked (0 appears in file), then iso-8859-1 encoding is used, this has a more restricted range of characters, and the <sup>o</sup> degree symbol is coded differently
|-
|-
| AutoSave=1
| RainComp1=0.5
| First with Cumulus 2
| First with Cumulus 2
| NOAA Reports Settings  
| NOAA Reports Settings &rarr; Thresholds
| Create NOAA files after daily rollover
| Rain comparison 1
|0
| (empty)
| Simple tick or not
| The report will count the number of days when the daily rainfall exceeds this threshold. In the parameter I have quoted, the first comparison has been set to the same as I have set else where as my significant rain threshold
* Tick (value shown as 1 in Cumulus.ini) if you want MX to use the (optional) Reports functionality
* Don't tick (value shown as 0 in Cumulus.ini) if MX Reports functionality not required
|-
|-
| City=
| RainComp2=
| First with Cumulus 2
| First with Cumulus 2
| NOAA Reports Settings &rarr; Site Details
| NOAA Reports Settings &rarr; Thresholds
| City
| Rain comparison 2
| (empty)
| (empty)
| Enter here your hamlet, village, town, or city, name
| The report will count the number of days when the daily rainfall exceeds this threshold.
|-
|-
| CoolingThreshold=22
| RainComp3=
| First with Cumulus 2
| First with Cumulus 2
| NOAA Reports Settings &rarr; Thresholds
| NOAA Reports Settings &rarr; Thresholds
| Cooling threshold
| Rain comparison 3  
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
| [[Heat/cold_degree_days_and_Chill_hours#Cold_Degree_Days|Cold Degree Days]] are a measure of the need to cool the air to make it more comfortable,  based on time above, and temperature difference above, a threshold temperature. An international standard says 22 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
|-
| CopyDirectory=
| Release 3.12.0
| NOAA Reports Settings &rarr; Report Options
| Copy Directory
| (empty)
| (empty)
| The folder on the web server you host to which reports are to be copied
| The report will count the number of days when the daily rainfall exceeds this threshold.
|-
|-
| FTPDirectory=
| State=
| First with Cumulus 2
| First with Cumulus 2
| NOAA Reports Settings &rarr; FTP Options
| NOAA Reports Settings &rarr; Site Details
| destination folder
| State
| Depends on release:
| (empty)
* (3.1.0 to 3.11.4) blank
| Enter here your local authority area or region (state in USA)
* (3.12.0 onwards) to match change in default web site script specification of '''Reports''' folder
| Specify the destination folder for file transfer to, on your FTP server
*Leave at default (for your release) and MX will work with the default web pages script supplied (at same release)
* Specify a folder relative to FTP root, and MX will upload reports to that folder instead (you are then responsible for writing any script on your web site to find each report and do any processing).
|-
|-
| HeatingThreshold=15.5
| UseDotDecimal=0
| First with Cumulus 2
| Release 3.9.5 - b3100
| NOAA Reports Settings &rarr; Thresholds
| NOAA Reports Settings &rarr; Report Options
| Heating threshold
| Use a 'dot' decimal point
| 65<sup>o</sup> F or 18.3<sup>o</sup>C
| 0 (disable)
|[[Heat/cold_degree_days_and_Chill_hours#Heat_Degree_Days| Heating Degree Days]] are a measure of the need for heating, based on time below, and temperature difference below, a threshold temperature. An international standard says 15.5 <sup>o</sup>Celsius is a suitable threshold to ensure comfort. For historical consistency, the default used by MX is based on the threshold used when Steve Loft first implemented this in [[Reports_folder#A_brief_history_of_these_reports|Cumulus 2 (enhancement request 44)]], and that was done to match some early look up tables.
| Formatting real numbers for when NOAA report parsed by a script
 
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want NOAA reports to use decimal point even if locale says use decimal comma
* Don't tick (value shown as 0 in Cumulus.ini) if NOAA reports use the integer/decimal separator specified by locale
|-
|-
| MaxTempComp1=22
| UseMinMaxAvg=0
| First with Cumulus 2
| Release 3.12.0
| NOAA Reports Settings &rarr; Thresholds
| NOAA Reports Settings &rarr; Report Options
| Max temp comparison 1
| Use WHO average or Integrated average
| (empty)
| 0 (integrated average)
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the cooling degree day threshold in Celsius. Express in Fahrenheit if that is your chosen unit
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use WHO approach: (min + max)/2
* Don't tick (value shown as 0 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use integrated calculation: Sum of all temperature measurements divided by count of measurements
|-
|-
| MaxTempComp2=0
| YearFileFormat='NOAAYR'yyyy'.txt’
| First with Cumulus 2
| First with Cumulus 2
| NOAA Reports Settings &rarr; Thresholds
| NOAA Reports Settings &rarr; Output Files
| Max temp comparison 2
| Yearly filename format
| (empty)
| 'NOAAYR'yyyy'.txt'
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
| Here you specify the filename template for MX to use when reading, or writing, yearly reports
 
There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension.  
|-
|-
| MinTempComp1=15.5
|12hourformat=0
| First with Cumulus 2
| ???
| NOAA Reports Settings &rarr; Thresholds
| Min temp comparison 1
| (empty)
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the first comparison has been set to agree with the heating degree day  threshold in Celsius. Express in Fahrenheit if that is your chosen unit
|-
| MinTempComp2=0
| First with Cumulus 2
| NOAA Reports Settings &rarr; Thresholds
| Min temp comparison 2
| (empty)
| The report will count the number of days when this threshold is exceeded. In the parameter I have quoted, the second comparison has been set to agree with feezing point (I’m using Celsius). Express in Fahrenheit if that is your chosen unit
|-
| MonthFileFormat='NOAAMO'MMyy'.txt'
| First with Cumulus 2
| NOAA Reports Settings &rarr; Output Files
| NOAA Reports Settings &rarr; Output Files
| Monthly filename format
|Time format
| 'NOAAMO'MMyy'.txt' (note quotes round '''NOAAMO''' and round '''.txt''')
|0 (24 hour)
| Here you specify the filename template for MX to use when reading, or writing, monthly reports
| How times are output on reports
* 24 Hour (value shown as 0 in Cumulus.ini)
* 12 Hour (value shown as 1 in Cumulus.ini)
|}
 
 
===Normal Mean Temperatures===


There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension.  e.g. "NOAAMO"MMMyyyy".txt" would also be valid.
* File Section is [NOAA]
|-
* The parameters run from ‘’’NOAATempNormJan=’’’ to ‘’’NOAATempNormDec=’’
| Name=Personal Weather Station
* There is one box labelled for each month on the settings screens
| First with Cumulus 2
* All the defaults are (blank)
| NOAA Reports Settings &rarr; Site Details
* What you enter is the mean temperature, long-term averages (say over 10 or 30 years if available) say is expected that month, often taken from local climate statistics, or your own past measurements
| Site Name
 
| (empty)
===Normal Precipitation===
| What you would like to see in report title for your station name
 
* File Section is [NOAA]
Rainfall equivalents of mean temperature described above
 
 
==Optional Structured Query Language Settings==
 
SQL is structured in the sense that keywords have to appear in the correct order, and there are rules about which words are mandatory. SQL is not just for running queries that read database tables, it can create database tables, give and revoke permissions, and do many more maintenance type tasks. SQL is a language in that each variant of SQL has a vocabulary and set of rules that are specific to that database server, although there is a sub-set, that is set by "ANSI", of words and constructions that all SQL dialects should obey.
 
MX uses two types of SQL. One type is for SQLite database (see [[Cumulusmx.db]] and [[Diary.db]], that type stores data in rows that are numbered, and columns that are named. In a retrieval query you can sort ascending/descending on value in any column.  You can select a row by specifyimg content, but that gets translated into a row number to actually determine what is updated.
 
The file section '''[MySQL]''' is about a different type of database (i.e. Maria database, or Oracle MySQL) these implement a relational database that has to satisfy the rule that all data appears in a table with rows and columns. The columns have a particular order, but there is no control over the order of rows, so you can't specify a row number, you either specify a primary key that identifies a particular row, or you specify that what is returned from query should be sorted in an ascending/descending order of the value in a specified column.
 
Both "CumulusMX.exe" and "ExportToMySQL.exe" make use of the following settings:
 
{| class="wikitable" border="1"
|-
!style="width:30px" | Executable
!style="width:100px" | Function
!style="width:300px" | Description
|-
| CumulusMX.exe
| Data Logs menu
| An option "Update MySQL on Edit" allows you to decide whether MX issues SQL when you edit a data log or "dayfile.txt", so the same edit is made to the corresponding database table, provided that the table has been created with the default name and has the column names defined by default.
|-
|-
| NOAAUseUTF8=1
! rowspan="7" |CumulusMX.exe
| First with Cumulus 2
| Settings menu &rarr; MySQL settings &rarr; General Options
| NOAA Reports Settings &rarr; Report Options
| An option "Buffer commands on failure" allows you to decide whether MX tries to run SQL commands again, if they fail. IMPORTANT: This is to cope with failure due to the database server going down; the option should not be ticked if you are testing new "custom" SQL and may have made a mistake in the coding. You need to ensure the SQL is either generated by MX as a fixed query, or has been tested and is correct synta before considering this option.
| Use UTF-8 encoding
| 1 (UTF-8)
| Please see [[Reports_folder#Encoding]]
* Tick (value shown as 1 in Cumulus.ini) for default, modern files use UTF-8 encoding, this can display an extended range of characters, including the <sup>o</sup> degree symbol
* If unticked (0 appears in file), then iso-8859-1 encoding is used, this has a more restricted range of characters, and the <sup>o</sup> degree symbol is coded differently
|-
|-
| RainComp1=0.5
| Settings menu &rarr; MySQL settings &rarr; Realtime.txt Upload
| First with Cumulus 2
| An option that can be enabled that automatically updates a "Realtime" table, each new row is effectively what is stored in the file [[realtime.txt]].
| NOAA Reports Settings &rarr; Thresholds
| Rain comparison 1
| (empty)
| The report will count the number of days when the daily rainfall exceeds this threshold. In the parameter I have quoted, the first comparison has been set to the same as I have set else where as my significant rain threshold
|-
|-
| RainComp2=
| Settings menu &rarr; MySQL settings &rarr; Dayfile.txt Upload
| First with Cumulus 2
| An option that can be enabled that at end of day ensures that a new line is added to [[dayfile.txt]] and a new row (with similar data) is inserted into a "Dayfile" table.
| NOAA Reports Settings &rarr; Thresholds
| Rain comparison 2
| (empty)
| The report will count the number of days when the daily rainfall exceeds this threshold.
|-
|-
| RainComp3=
| Settings menu &rarr; MySQL settings &rarr; Monthly log file Upload
| First with Cumulus 2
| An option that can be enabled that automatically updates a "Monthly" table, every time a new line is added to the [[Standard_log_files|standard data log file]].
| NOAA Reports Settings &rarr; Thresholds
|-
| Rain comparison 3
| Settings menu &rarr; MySQL settings &rarr; Custom Upload - seconds interval
| (empty)
| An option that can be enabled that runs some predetermined SQL every time the specified number of seconds has elapsed.
| The report will count the number of days when the daily rainfall exceeds this threshold.
|-
| Settings menu &rarr; MySQL settings &rarr; Custom Upload - minutes interval
| An option that can be enabled that runs some predetermined SQL every time the specified number of minutes has elapsed.
|-
|-
| State=
| Settings menu &rarr; MySQL settings &rarr; Custom Upload - at rollover
| First with Cumulus 2
| An option that can be enabled that runs some predetermined SQL just after dayfile.txt has had a new line, but before other end-of-day actions occur.
| NOAA Reports Settings &rarr; Site Details
| State
| (empty)
| Enter here your local authority area or region (state in USA)
|-
|-
| UseDotDecimal=0
| ExportToMySQL.exe
| Release 3.9.5 - b3100
| parameters to utility
| NOAA Reports Settings &rarr; Report Options
| Determine which file read (and therefore which table updated, using table names set in table name parameters explained in next table)
| Use a 'dot' decimal point
|}
| 0 (disable)
WARNING: The SQL syntax for [https://mysqlconnector.net/ "My SQL Connector"] used by .NET and therefore by MX, differs in various ways from the MySQL Client or MARIA db syntax.
| Formatting real numbers for when NOAA report parsed by a script
 
Here is an example of what might be input as "predetermined SQL", showing how you can use conditionals and web tags:
<pre>
INSERT IGNORE INTO table_name_1 (primary_key, column_name_1, column_name_2 ....) VALUES ('<#primary_key>', '<#web tag_name_1 modifier_1>', '<#web tag_name_2 modifier_2>'  ....);
 
 
BEGIN NOT ATOMIC
IF '<#web tag>' = '---' THEN
simpler query to run if something not numeric;
ELSE
UPDATE table_name_2 SET  column_name_1 = '<#web tag_name_1 modifier_1>', column_name_2 =  '<#web tag_name_2 modifier_2>'  ....  WHERE primary_key = '<#primary_key>';
END IF
END;
</pre>
 
* Introduced in Cumulus MX 3.0.0 beta
* File Section is [MySQL]
* MX page is Settings menu &rarr; MySQL settings


Simple tick or not
{| class="wikitable" border="1"
* Tick (value shown as 1 in Cumulus.ini) if you want NOAA reports to use decimal point even if locale says use decimal comma
|-
* Don't tick (value shown as 0 in Cumulus.ini) if NOAA reports use the integer/decimal separator specified by locale
!style="width:30px" | Parameter Line Entry
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
|-
| UseMinMaxAvg=0
| BufferOnFailure=0
| Release 3.12.0
| General Options
| NOAA Reports Settings &rarr; Report Options
| Buffer commands on failure
| Use WHO average or Integrated average
| 0 = ignore errors
| 0 (integrated average)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use WHO approach: (min + max)/2
*Tick (value shown as 1 in Cumulus.ini) if you want MX to store any commands that fail (see note above), and try them again (stored commands lost if MX is stopped)
* Don't tick (value shown as 0 in Cumulus.ini) if you want temperature averages quoted in NOAA reports to use integrated calculation: Sum of all temperature measurements divided by count of measurements
* Don't tick (value shown as 0 in Cumulus.ini) if you want MX to ignore any errors
|-
|-
| YearFileFormat='NOAAYR'yyyy'.txt’
| CustomMySqlMinutesCommandString=
| First with Cumulus 2
| Custom Upload - minutes interval
| NOAA Reports Settings &rarr; Output Files
| "SQL command" only shown if next parameter is ticked
| Yearly filename format
| (empty)
| 'NOAAYR'yyyy'.txt'
| See "predetermined SQL" example above
| Here you specify the filename template for MX to use when reading, or writing, yearly reports
 
There is a prefix text in quotes,then comes a way to specify months (see [[Reports_folder#NOAA_style_Report_Naming]]), and finally comes the mandatory text extension.
|-
|-
|12hourformat=0
| CustomMySqlMinutesEnabled=0
| ???
| Custom Upload - minutes interval
| NOAA Reports Settings &rarr; Output Files
| Custom Minutes Enabled
|Time format
| 0 = don't display other options
|0 (24 hour)
| Simple tick or not
| How times are output on reports
*Tick (value shown as 1 in Cumulus.ini) if you want the previous and next options to be displayed, and actioned
* 24 Hour (value shown as 0 in Cumulus.ini)
* Don't tick (value shown as 0 in Cumulus.ini) if MX is not to action the previous and next settings
* 12 Hour (value shown as 1 in Cumulus.ini)
|}
 
 
 
===Normal Mean Temperatures===
 
* File Section is [NOAA]
* The parameters run from ‘’’NOAATempNormJan=’’’ to ‘’’NOAATempNormDec=’’
* There is one box labelled for each month on the settings screens
* All the defaults are (blank)
* What you enter is the mean temperature, long-term averages (say over 10 or 30 years if available) say is expected that month, often taken from local climate statistics, or your own past measurements
 
===Normal Precipitation===
 
* File Section is [NOAA]
Rainfall equivalents of mean temperature described above
 
==Optional Third-party Upload Settings==
 
 
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
| CustomMySqlMinutesIntervalIndex=6
!style="width:30px" | File Section
| Custom Upload - minutes interval
!style="width:60px" | MX Section
| Interval:
!style="width:80px" | Action on Settings page
| 6 = 10 minutes
!style="width:20px" | Default
| Drop-down list of predetermined intervals:
* 0 = 1 minute
* 1 = 2 minutes
* 2 = 3 minutes
* 3 = 4 minutes
* 4 = 5 minutes
* 5 = 6 minutes
* 6 = 10 minutes
* 7 = 12 minutes
* 8 = 20 minutes
* 9 = 30 minutes
* 10 = 1 hour (60 minutes)
|-
|-
| <pre>ID=
| CustomMySqlRolloverCommandString=
pass=-1
| Custom Upload - at rollover
server=cwop.aprs.net
| "SQL command" only shown if next parameter is ticked
port=14580
| (empty)
Enabled=0
| See "predetermined SQL" example above
Interval=9
SendSR=0
APRSHumidityCutoff=0</pre>
| [APRS]
| APRS/CWOP
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>User=
| CustomMySqlRolloverEnabled=0
Password=
| Custom Upload - at rollover
Language=en
| Custom Rollover Enabled
Enabled=0
| 0 = don't display other options
Interval=900
| Simple tick or not
SendUV=0
*Tick (value shown as 1 in Cumulus.ini) if you want the previous and next options to be displayed, and actioned
SendSR=0
* Don't tick (value shown as 0 in Cumulus.ini) if MX is not to action the previous and next settings
SendSoilTemp=0
SendIndoor=0
SendSoilMoisture=0
SendLeafWetness=0
SendAirQuality=0</pre>
| [Awekas]
| AWEKAS
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>Enabled=0
| CustomMySqlSecondsCommandString=
CatchUp=1
| Custom Upload - seconds interval
APIkey=
| "SQL command" only shown if next parameter is ticked
StationId=
| (empty)
Interval=15</pre>
| See "predetermined SQL" example above
| [OpenWeatherMap]
|-
| OpenWeatherMap
| CustomMySqlSecondsEnabled=0
| Tick "Enabled" to see list of parameters so you can edit them
| Custom Upload - seconds interval
| Defaults are as shown in list of parameters
| Custom Seconds Enabled
| 0 = don't display other options
| Simple tick or not
*Tick (value shown as 1 in Cumulus.ini) if you want the previous and next options to be displayed, and actioned
* Don't tick (value shown as 0 in Cumulus.ini) if MX is not to action the previous and next settings
|-
|-
| <pre>ID=
| CustomMySqlSecondsInterval=10
Password=
| Custom Upload - seconds interval
Enabled=0
| Interval (seconds):
Interval=15
| 10
SendUV=0
| A number field, takes 1 to 59
SendSR=0
CatchUp=1</pre>
| [PWSweather]
| PWS Weather
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>User=
| Database=
Password=
| Server details
Enabled=0
| Database name:
Interval=60
| (empty)
OauthToken=unknown
| A text field where you enter the name of the database your tables are to be created/updated in
OauthTokenSecret=unknown
TwitterSendLocation=1</pre>
| [Twitter]
| Twitter
| Please note that twitter is deprecated, no new settings possible, existing settings can be used by people who migrated from Cumulus 1 with working tokens
| Defaults are as shown in list of parameters
|-
|-
| <pre>Wid=
| DayfileMySqlEnabled=0
Key=
| Dayfile.txt upload
Enabled=0
| Dayfile Enabled
Interval=10
| 0
SendUV=0
| Simple tick or not
SendSR=0
*Tick (value shown as 1 in Cumulus.ini) if you want MX to at end of day ensure that a new line is added to [[dayfile.txt]] and a new row (with similar data) is inserted into a "Dayfile" table
SendAQI=0
* Don't tick (value shown as 0 in Cumulus.ini) if MX is only to ensure that a new line is added to dayfile.txt
SendSoilMoisture=0
|-
SoilMoistureSensor=0
| DayfileTable=
SendLeafWetness=0
| Dayfile.txt upload
LeafWetnessSensor=0</pre>
| Table name
| [WeatherCloud]
| Dayfile
| WeatherCloud
| Having defined this table, and saved the settings, click the "Create Dayfile" button to create the database table with the standard column names. If you change the name here, normal updates and "ExportToMySQl.exe" will use the table name you define, but the option to update table when you edit "dayfile.txt" will fail (and if set to do so, keep failing as it repeats).
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>Enabled=0
| Host=Localhost
StationUID=
| Server details
Password=
| Host name
Interval=1
| (empty)
SendRain=0</pre>
| Set to whatever host name your database server has specified, if you host [[Your_Own_Server]], then you may be able to use "Localhost".
| [WindGuru]
| Windguru
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>APIkey=
| MonthlyMySqlEnabled=0
StationIdx=0
| Monthly logfile upload
Enabled=0
| Monthly Log Enabled
Interval=15
| 0
SendUV=0
| Simple tick or not
CatchUp=1</pre>
*Tick (value shown as 1 in Cumulus.ini) if you want MX to at your standard logging interval ensure that a new line is added to [[Standard_log_files|standard data log file]] and a new row (with similar data) is inserted into a "Monthly" table.
| [Windy]
* Don't tick (value shown as 0 in Cumulus.ini) if MX is only to ensure that a new line is added to standard data log file
| Windy.com
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| <pre>ID=
| MonthlyTable=
  Password=
| Monthly logfile upload
Enabled=0
| Table name
Interval=15
| Monthly
SendUV=0
| Having defined this table, and saved the settings, click the "Create Monthly" button to create the database table with the standard column names. You might wish to change the name here once a year, to stop the database table getting enormous, if so you might name the table something like "standard2020". If you change the name here, normal updates and "ExportToMySQl.exe"  will use the table name you define, but the option to update table when you edit "MMMyyyyLog.txt" will fail (and if set to do so, keep failing as it repeats).
SendSR=0
|-
CatchUp=1</pre>
| Pass=
| [WOW]
| Server details
| Met Office WOW
| Password
| Tick "Enabled" to see list of parameters so you can edit them
| (empty)
| Defaults are as shown in list of parameters
| Set to whatever password is used for update access with the database user name (see below)
|-
| Port=3306
| Server details
| Port number
| 3306
| The port related to the host name (defined above) for update access to your database server
|-
| RealtimeMySql1MinLimit=0
| Realtime.txt upload
| Limit Inserts:
| 0 = false
| Simple tick or not
*Tick (value shown as 1 in Cumulus.ini)
* Don't tick (value shown as 0 in Cumulus.ini)
See explanation beside and below setting
|-
| RealtimeMySqlEnabled=0
| Realtime.txt upload
| Real time Enabled
| 0 = don't display other options
| Simple tick or not
*Tick (value shown as 1 in Cumulus.ini) if you want MX to at your real time interval ensure that a new realtime.txt file is created and a new row (with similar data) is inserted into a "Realtime" table.
* Don't tick (value shown as 0 in Cumulus.ini) if MX is only to ensure that a new line is added to standard data log file
|-
| RealtimeRetention=
| Realtime.txt upload
| '''Data Retention value''' and '''Data Retention unit'''
| "7" and "Days"
| The value field will take any number, the unit field is a dropdown:
* Seconds
* Minutes
* Hours
* Days
* Weeks
* Months
Taken together, these determine the period for which rows are kept in the table named in "RealtimeTable", any row older than this specification will be deleted as part of the automatic SQL
|-
| RealtimeTable=Realtime
| Realtime.txt upload
| Table name
| Realtime
| Having defined this table, and saved the settings, click the "Create Realtime" button to create the database table with the standard column names. Remember that you can tailor the contents of "realtime.txt", if you want non-standard columns in this table, you have to create the table yourself.
|-
| UpdateOnEdit=1
| General Options
| Update MySQL on Edit
| 1 = update the table when edit the file
| Simple tick or not
*Tick (value shown as 1 in Cumulus.ini)
* Don't tick (value shown as 0 in Cumulus.ini)
Please see begining of previous table for explanation and warning about how all defaults must be set for this to work
|-
| User=
| Server details
| User name
| (empty)
| Database access user name, that matches with password described earlier
|}
|}


==Optional Web Server==


The settings listed here changed dramatically at both 3.10.0 and 3.12.0 releases, but they have gradually evolved throughout the development of MX.
==Optional Third-party Upload Settings==


FRom 3.12.0, MX can optionally either copy files to a web server you host or file transfer files to a commercial web server.


To implement (and customise) this web server functionality, there are many settings as listed alphabetically in this table.  The Internet settings page simplifies making settings by providing selections that amend multiple settings in a bulk operation:
* Some settings (marked ^ in table) are only displayed if you select '''I want to use the supplied default web site'''.
** For these settings, the "Generate" option is enabled in nearly all (see any qualifier) settings
** If you select "Enable file copy of standard files" (default is disabled) then those settings have their "Copy" option enabled in nearly all (see any qualifier) cases, and their "FTP Transfer" option deselected (instead of defaults shown in table)
** If you deselect "Enable file transfer of standard files" (default is enabled) then those settings have their "Copy" option disabled, and their "FTP Transfer" option enabled in nearly all (see any qualifier) cases (as per defaults shown in table)
* '''The default selections assume you have air quality, and solar, sensors; so you may need to disable some of the defaults the above selections have made'''
* If you don't select '''I want to use the supplied default web site''', then all the settings marked ^ are disabled
** This is what you want if you do not use the MX optional web server functionality
** If you have a customised  web site, you may want to select '''I want to use the supplied default web site'''  to see the settings that would otherwise all be disabled, and then pick any options that would be useful to you.
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:100px" | File Section
!style="width:30px" | File Section
!style="width:100px" | Introduced
!style="width:60px" | MX Section
!style="width:100px" | Shown on Settings page?
!style="width:80px" | Action on Settings page
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:600px" | Description
|-
|-
| ActiveFTP=0
| <pre>ID=
| [FTP site]
pass=-1
| Legacy Cumulus
server=cwop.aprs.net
| No
port=14580
| Change directly in file as at release 3.11.x
Enabled=0
| (n/a )
Interval=9
| (n/a)
SendSR=0
| *0 = Disabled (default)
APRSHumidityCutoff=0</pre>
*1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
| [APRS]
| APRS/CWOP
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| Copy-airquality=0
| <pre>User=
| [FTP site]
Password=
| Release 3.12.0
Language=en
| ^
Enabled=0
| Internet Settings &rarr; Graph File Settings
Interval=900
| airquality.json &rarr; Copy
  SendUV=0
| 0 (disabled)
SendSR=0
| Simple tick or not
SendSoilTemp=0
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the airquality.json file to your local web server (need to select "Generate" too)
SendIndoor=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
SendSoilMoisture=0
|-
SendLeafWetness=0
| Copy-alldailydegdaydata=0
SendAirQuality=0</pre>
| [FTP site]
| [Awekas]
| Release 3.12.0
| AWEKAS
| ^
| Tick "Enabled" to see list of parameters so you can edit them
| Internet Settings &rarr; Graph File Settings
| Defaults are as shown in list of parameters
| alldailydegdaydata.json &rarr; Copy
|-
| 0 (disabled)
| <pre>Enabled=0
| Simple tick or not
  CatchUp=1
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailydegdaydata.json]] file to your local web server (need to select "Generate" too)
APIkey=
* Don't tick (value shown as 0 in Cumulus.ini) to disable
StationId=
|-
Interval=15</pre>
| Copy-alldailyhumdata=0
| [OpenWeatherMap]
| [FTP site]
| OpenWeatherMap
| Release 3.12.0
| Tick "Enabled" to see list of parameters so you can edit them
| ^
| Defaults are as shown in list of parameters
| Internet Settings &rarr;  Graph File Settings
| alldailyhumdata.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| Copy-alldailypressdata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Graph File Settings
| alldailypressdata.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailyraindata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailyraindata.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-alldailysolardata=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailysolardata.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-
|-
| Copy-alldailytempdata=0
| <pre>ID=
| [FTP site]
Password=
| Release 3.12.0
Enabled=0
| ^
Interval=15
| Internet Settings &rarr; Graph File Settings
SendUV=0
| alldailytempdata.json &rarr; Copy
SendSR=0
| 0 (disabled)
  CatchUp=1</pre>
| Simple tick or not
| [PWSweather]
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
| PWS Weather
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| Copy-alldailywinddata=0
| <pre>User=
| [FTP site]
Password=
| Release 3.12.0
Enabled=0
| ^
Interval=60
| Internet Settings &rarr; Graph File Settings
OauthToken=unknown
| alldailywinddata.json &rarr; Copy
  OauthTokenSecret=unknown
| 0 (disabled)
TwitterSendLocation=1</pre>
| Simple tick or not
| [Twitter]
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
| Twitter
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Please note that twitter is deprecated, no new settings possible, existing settings can be used by people who migrated from Cumulus 1 with working tokens
| Defaults are as shown in list of parameters
|-
|-
| Copy-alltempsumdata=0
| <pre>Wid=
| [FTP site]
Key=
| Release 3.12.0
Enabled=0
| ^
Interval=10
| Internet Settings &rarr; Graph File Settings
SendUV=0
| alldailytempsumdata.json &rarr; Copy
SendSR=0
| 0 (disabled)
SendAQI=0
| Simple tick or not
SendSoilMoisture=0
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempsumdata.json]] file to your local web server (need to select "Generate" too)
SoilMoistureSensor=0
* Don't tick (value shown as 0 in Cumulus.ini) to disable
SendLeafWetness=0
  LeafWetnessSensor=0</pre>
| [WeatherCloud]
| WeatherCloud
| Tick "Enabled" to see list of parameters so you can edit them
| Defaults are as shown in list of parameters
|-
|-
| Copy-availabledata=0
| <pre>Enabled=0
| [FTP site]
StationUID=
| Release 3.12.0
Password=
| ^ (once only)
Interval=1
| Internet Settings &rarr; Graph File Settings
  SendRain=0</pre>
| availabledata.json  &rarr; Copy
| [WindGuru]
| 0 (disabled)
| Windguru
| Simple tick or not
| Tick "Enabled" to see list of parameters so you can edit them
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[availabledata.json]] file to your local web server (need to select "Generate" too)
| Defaults are as shown in list of parameters
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Copy-dailyrain=0
| <pre>APIkey=
| [FTP site]
StationIdx=0
| Release 3.12.0
  Enabled=0
| ^
Interval=15
| Internet Settings &rarr; Graph File Settings
SendUV=0
| dailyrain.json &rarr; Copy
CatchUp=1</pre>
| 0 (disabled)
| [Windy]
| Simple tick or not
| Windy.com
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
| Tick "Enabled" to see list of parameters so you can edit them
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Defaults are as shown in list of parameters
|-
| Copy-dailytemp=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr;  Graph File Settings
| dailytemp.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailytemp.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-graphconfig=0
| [FTP site]
| Release 3.12.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| graphconfig.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Copy-humdata=0
| <pre>ID=
| [FTP site]
Password=
| Release 3.12.0
Enabled=0
| ^
Interval=15
| Internet Settings &rarr;  Graph File Settings
SendUV=0
| humdata.json &rarr; Copy
SendSR=0
| 0 (disabled)
CatchUp=1</pre>
| Simple tick or not
| [WOW]
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[humdata.json]] file to your local web server (need to select "Generate" too)
| Met Office WOW
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Tick "Enabled" to see list of parameters so you can edit them
|-  
| Defaults are as shown in list of parameters
| Copy-pressdata=0
|}
| [FTP site]
 
| Release 3.12.0
==Optional Web Server==
| ^
 
| Internet Settings &rarr;  Graph File Settings
The settings listed here changed dramatically at both 3.10.0 and 3.12.0 releases, but they have gradually evolved throughout the development of MX.
| pressdata.json &rarr; Copy
 
| 0 (disabled)
FRom 3.12.0, MX can optionally either copy files to a web server you host or file transfer files to a commercial web server.
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[pressdata.json]] file to your local web server (need to select "Generate" too)
To implement (and customise) this web server functionality, there are many settings as listed alphabetically in this table.  The Internet settings page simplifies making settings by providing selections that amend multiple settings in a bulk operation:
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Some settings (marked ^ in table) are only displayed if you select '''I want to use the supplied default web site'''.  
|-  
** For these settings, the "Generate" option is enabled in nearly all (see any qualifier) settings
| Copy-raindata=0
** If you select "Enable file copy of standard files" (default is disabled) then those settings have their "Copy" option enabled in nearly all (see any qualifier) cases, and their "FTP Transfer" option deselected (instead of defaults shown in table)
| [FTP site]
** If you deselect "Enable file transfer of standard files" (default is enabled) then those settings have their "Copy" option disabled, and their "FTP Transfer" option enabled in nearly all (see any qualifier) cases (as per defaults shown in table)
* '''The default selections assume you have air quality, and solar, sensors; so you may need to disable some of the defaults the above selections have made'''
* If you don't select '''I want to use the supplied default web site''', then all the settings marked ^ are disabled
** This is what you want if you do not use the MX optional web server functionality
** If you have a customised  web site, you may want to select '''I want to use the supplied default web site'''  to see the settings that would otherwise all be disabled, and then pick any options that would be useful to you.
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | File Section
!style="width:100px" | Introduced
!style="width:100px" | Shown on Settings page?
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:600px" | Description
|-
| ActiveFTP=0
| [FTP site]
| Legacy Cumulus
| No
| Change directly in file as at release 3.11.x
| (n/a )
| (n/a)
| *0 = Disabled (default)
*1 = Enabled, Cumulus will use 'active' FTP mode instead of the default 'passive' mode. You should only select active mode if you are having problems with FTP uploads.
|-
| Copy-airquality=0
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| raindata.json &rarr; Copy
| airquality.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[raindata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the airquality.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
|-  
|-  
| Copy-solardata=0
| Copy-alldailydegdaydata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr; Graph File Settings
| Internet Settings &rarr; Graph File Settings
| solardata.json &rarr; Copy
| alldailydegdaydata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[solardata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailydegdaydata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Copy-sunhours=0
| Copy-alldailyhumdata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| sunhours.json &rarr; Copy
| alldailyhumdata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[sunhours.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Copy-tempdata=0
| Copy-alldailypressdata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| tempdata.json &rarr; Copy
| alldailypressdata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[tempdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Copy-wdirdata=0
| Copy-alldailyraindata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| wdirdata.json &rarr; Copy
| alldailyraindata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Copy-websitedata=0
| Copy-alldailysolardata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr; Standard File Settings
| Internet Settings &rarr; Graph File Settings
| websitedata.json &rarr; Copy
| alldailysolardata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
Simple tick or not
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the resulting websitedata.json to your local web server
|-
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Copy-alldailytempdata=0
|-  
| Copy-winddata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| winddata.json &rarr; Copy
| alldailytempdata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[winddata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-
| Copy-wxnow=0
| Copy-alldailywinddata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^ (disabled)
| ^
| Internet Settings &rarr; Standard File Settings
| Internet Settings &rarr; Graph File Settings
| wxnow.txt &rarr; Copy
| alldailywinddata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy that file to your local web server
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-
| CopyMoonImage=0
| Copy-alltempsumdata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr; Moon Image
| Internet Settings &rarr; Graph File Settings
| Copy Moon image file
| alldailytempsumdata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy moon image file to your local web server (need to select "Generate Moon Image" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[alldailytempsumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Create-airquality=0
| Copy-availabledata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| airquality.json &rarr; Generate
| availabledata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the airquality.json file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-
| Create-alldailydegdaydata=0
| Copy-dailyrain=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailydegdaydata.json &rarr; Generate
| dailyrain.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailydegdaydata.json]] file  
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-alldailyhumdata=0
| Copy-dailytemp=0
 
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailyhumdata.json &rarr; Generate
| dailytemp.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyhumdata.json]] file  
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[dailytemp.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-alldailypressdata=0
| Copy-graphconfig=0
| [FTP site]
| Release 3.12.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| graphconfig.json &rarr; Copy
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Copy-humdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailypressdata.json &rarr; Generate
| humdata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailypressdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[humdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-alldailyraindata=0
| Copy-pressdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailyraindata.json &rarr; Generate
| pressdata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyraindata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[pressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-alldailysolardata=0
| Copy-raindata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailysolardata.json &rarr; Generate
| raindata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailysolarydata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[raindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-alldailytempdata=0
| Copy-solardata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailytempdata.json &rarr; Generate
| solardata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[solardata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-  
|-  
| Create-alldailywinddata=0
| Copy-sunhours=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailywinddata.json &rarr; Generate
| sunhours.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailywinddata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[sunhours.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-  
|-  
| Create-alltempsumdata=0
| Copy-tempdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailytempsumdata.json &rarr; Generate
| tempdata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempsumdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[tempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-availabledata=0
| Copy-wdirdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^ (once only)
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| availabledata.json &rarr; Generate
| wdirdata.json &rarr; Copy
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[availabledata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| Create-dailyrain=0
| Copy-websitedata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr; Graph File Settings
| Internet Settings &rarr; Standard File Settings
| dailyrain.json &rarr; File Transfer
| websitedata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailyrain.json]] file
 
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the resulting websitedata.json to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-dailytemp=0
| Copy-winddata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| dailytemp.json &rarr; File Transfer
| winddata.json &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[winddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-graphconfig=0
| Copy-wxnow=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.12.0
| ^ (once only)
| ^ (disabled)
| Internet Settings &rarr; Graph File Settings
| Internet Settings &rarr; Standard File Settings
| graphconfig.json &rarr; Generate
| wxnow.txt &rarr; Copy
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[graphconfig.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to copy that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-humdata=0
| CopyMoonImage=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Moon Image
| Copy Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy moon image file to your local web server (need to select "Generate Moon Image" see '''MoonImageEnabled=''' too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Create-airquality=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| humdata.json &rarr; Generate
| airquality.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[humdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the airquality.json file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-pressdata=0
| Create-alldailydegdaydata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| pressdat.json &rarr; Generate
| alldailydegdaydata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[pressdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailydegdaydata.json]] file  
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-raindata=0
| Create-alldailyhumdata=0
 
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| raindata.json &rarr; Generate
| alldailyhumdata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[raindata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyhumdata.json]] file  
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-solardata=0
| Create-alldailypressdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| solardata.json &rarr; Generate
| alldailypressdata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[solardata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailypressdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| Create-tempdata=1
| Create-alldailyraindata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| dailytemp.json &rarr; Generate
| alldailyraindata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailyraindata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-sunhours=0
| Create-alldailysolardata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| dailytemp.json &rarr; Generate
| alldailysolardata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailysolarydata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable  (e.g. if you don't have a solar sensor)
|-  
|-  
| Create-tempdata=0
| Create-alldailytempdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| tempdata.json &rarr; Generate
| alldailytempdata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[tempdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-wdirdata=0
| Create-alldailywinddata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| wdirdata.json &rarr; Generate
| alldailywinddata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[wdirdata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailywinddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-websitedata=0
| Create-alltempsumdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| websitedata.json &rarr; Generate
| alldailytempsumdata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[alldailytempsumdata.json]] file
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to process the '''websitedataT.json''' file into websitedata.json
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Create-winddata=0
| Create-availabledata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| winddata.json &rarr; Generate
| availabledata.json &rarr; Generate
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[winddata.json]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[availabledata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Create-wxnow=0
| Create-dailyrain=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^ (disabled)
| ^
| (depends on release)
| Internet Settings &rarr; Graph File Settings
* (releases 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
| dailyrain.json &rarr; File Transfer
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
| 1 (enabled)
| wxnow.txt &rarr; Generate
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a [[wsnow.txt]] file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailyrain.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| DeleteBeforeUpload=0
| Create-dailytemp=0
| [FTP site]
| [FTP site]
| legacy Cumulus
| Release 3.10.0
| (always)
| ^
| (depends on release)
| Internet Settings &rarr; Graph File Settings
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
| dailytemp.json &rarr; File Transfer
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| 1 (enabled)
| Delete before upload
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to delete existing file (with same name) on the web server before it creates the new file
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| Directory=
| Create-graphconfig=0
| [FTP site]
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| (always)  
| ^ (once only)
| Internet Settings &rarr; Web/FTP Site
| Internet Settings &rarr; Graph File Settings
| Remote FTP Directory
| graphconfig.json &rarr; Generate
| (blank)
| 1 (enabled)
| Directory (including path) on your server to which FTP (if 'Enabled' is enabled) will upload the files.  
| Simple tick or not
*value is left Blank, default, the root position specified by ftp server
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[graphconfig.json]] file
*A path from the starting point as the position specified by ftp server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
 
Not used for ExtraRemoteNN parameters
|-  
|-  
| DisableEPSV=0
| Create-humdata=0
| [FTP site]
| [FTP site]
| Beta Release 3.0.0  build 3045
| Release 3.10.0
| No
| ^
| Still Change directly in file as at release 3.11.x
| Internet Settings &rarr; Graph File Settings
| (n/a )
| humdata.json &rarr; Generate
| 0
| *0 = Disabled (default)
*1 = Enabled, to use Extended Passive FTP-mode
|-
| DisableFtpsExplicit=0
| [FTP site]
| Release  3.4.0 - Build 3064
| No
| Change directly in file as at release 3.11.x
| (n/a )
| 0
| (change value following attribute)
*0 = Disabled (default) use FTPS Explicit mode
*1 = Enabled, to use FTPS Implicit mode
|-
| Enabled=1
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "File Transfer" option enabled
| Internet Settings &rarr; Interval Configuration
| Enable file transfer of standard files
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to enable file transfer of standard files (see rows marked ^ for further selections)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[humdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| EnableLocalCopy=0
| Create-pressdata=0
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "Copy" option enabled
| Internet Settings &rarr;  Interval Configuration
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to enable copying of files (see rows marked ^ for further selections)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| EnableRealtime=1
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Realtime Settings
| Enable Realtime
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a timer that will permit real time actions
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-airquality=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| airquality.json &rarr; File Transfer
| pressdat.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the airquality.json file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[pressdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-alldailydegdaydata=0
| Create-raindata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailydegdaydata.json &rarr; File Transfer
| raindata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailydegdaydata.json file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[raindata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-alldailyhumdata=0
| Create-solardata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailyhumdata.json &rarr; File Transfer
| solardata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[solardata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-  
|-
| Ftp-alldailypressdata=0
| Create-tempdata=1
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailypressdata.json &rarr; File Transfer
| dailytemp.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-alldailyraindata=0
| Create-sunhours=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailyraindata.json &rarr; File Transfer
| dailytemp.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[dailytemp.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
|-  
|-  
| Ftp-alldailysolardata=0
| Create-tempdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailysolardata.json &rarr; File Transfer
| tempdata.json &rarr; Generate
| 0 (disabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[tempdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-alldailytempdata=0
| Create-wdirdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailytempdata.json &rarr; File Transfer
| wdirdata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[wdirdata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-alldailywinddata=0
| Create-websitedata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alldailywinddata.json &rarr; File Transfer
| websitedata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
 
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to process the '''websitedataT.json''' file into websitedata.json
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-alltempsumdata=0
| Create-winddata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| alltempsumdata.json &rarr; File Transfer
| winddata.json &rarr; Generate
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alltempsumdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate the [[winddata.json]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-
| Ftp-availabledata=0
| Create-wxnow=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^ (once only)
| ^ (disabled)
| Internet Settings &rarr; Graph File Settings
| (depends on release)
| availabledata.json  &rarr; File Transfer
* (releases 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
| wxnow.txt &rarr; Generate
| 0 (disabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a [[wsnow.txt]] file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| Ftp-dailyrain=0
| DeleteBeforeUpload=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| legacy Cumulus
| ^
| (always)
| Internet Settings &rarr; Graph File Settings
| (depends on release)
| dailyrain.json &rarr; File Transfer
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
| 1 (enabled)
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| Delete before upload
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to delete existing file (with same name) on the web server before it creates the new file
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable (this is the option appropriate to most servers)
|-  
|-
| Ftp-dailytemp=0
| Directory=
| [FTP site]
| [FTP site]
| Release 3.10.0
| Legacy Cumulus
| ^
| (always)
| Internet Settings &rarr; Graph File Settings
| Internet Settings &rarr; Web/FTP Site
| dailyrain.json &rarr; File Transfer
| Remote FTP Directory
| 1 (enabled)
| (blank)
| Simple tick or not
| Directory (including path) on your server to which FTP (if 'Enabled' is enabled) will upload the files.
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
*value is left Blank, default, the root position specified by ftp server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
*A path from the starting point as the position specified by ftp server
 
Not used for ExtraRemoteNN parameters
|-  
|-  
| Ftp-graphconfig=0
| DisableEPSV=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Beta Release 3.0.0 build 3045
| ^ (once only)
| No
| Internet Settings &rarr;  Graph File Settings
| Still Change directly in file as at release 3.11.x
| graphconfig.json &rarr; File Transfer
| (n/a )
| 1 (enabled)
| 0
| Simple tick or not
| *0 = Disabled (default)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
*1 = Enabled, to use Extended Passive FTP-mode
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| Ftp-humdata=0
| DisableFtpsExplicit=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.4.0 - Build 3064
| ^
| No
| Internet Settings &rarr; Graph File Settings
| Change directly in file as at release 3.11.x
| humdata.json &rarr; File Transfer
| (n/a )
| 0
| (change value following attribute)
*0 = Disabled (default) use FTPS Explicit mode
*1 = Enabled, to use FTPS Implicit mode
|-
| Enabled=1
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "File Transfer" option enabled
| Internet Settings &rarr; Interval Configuration
| Enable file transfer of standard files
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[humdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to enable file transfer of standard files (see rows marked ^ for further selections)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| EnableLocalCopy=0
| [FTP site]
| Release 3.12.0
| (always) Controls whether ^ settings have "Copy" option enabled
| Internet Settings &rarr;  Interval Configuration
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to enable copying of files (see rows marked ^ for further selections)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-
| Ftp-pressdata=0
| EnableRealtime=1
| [FTP site]
| [FTP site]
| Release 3.10.0
| Legacy Cumulus
| ^
| (always)
| Internet Settings &rarr; Graph File Settings
| Internet Settings &rarr; Realtime Settings
| pressdata.json &rarr; File Transfer
| Enable Realtime
| 1 (enabled)
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[pressdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to generate a timer that will permit real time actions
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-
| Ftp-raindata=0
| Ftp-airquality=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| raindata.json &rarr; File Transfer
| airquality.json &rarr; File Transfer
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[raindata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the airquality.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have an air quality sensor)
|-  
|-  
| Ftp-solardata=0
| Ftp-alldailydegdaydata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| solardata.json &rarr; File Transfer
| alldailydegdaydata.json &rarr; File Transfer
| 0 (disabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[solardata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the alldailydegdaydata.json file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-sunhours=0
| Ftp-alldailyhumdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| sunhours.json &rarr; File Transfer
| alldailyhumdata.json &rarr; File Transfer
| 0 (disabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[sunhours.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyhumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-tempdata=0
| Ftp-alldailypressdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| tempdata.json &rarr; File Transfer
| alldailypressdata.json &rarr; File Transfer
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[tempdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailypressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-wdirdata=0
| Ftp-alldailyraindata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| wdirdata.json &rarr; File Transfer
| alldailyraindata.json &rarr; File Transfer
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailyraindata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-websitedata=0
| Ftp-alldailysolardata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr; Standard File Settings
| Internet Settings &rarr; Graph File Settings
| websitedata.json &rarr; File Transfer
| alldailysolardata.json &rarr; File Transfer
| 0 (disabled)
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
| Simple tick or not
 
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailysolardata.json]] file to your local web server (need to select "Generate" too)
Simple tick or not
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the resulting websitedata.json to your local web server
|-
| Ftp-alldailytempdata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| alldailytempdata.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailytempdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| Ftp-winddata=0
| Ftp-alldailywinddata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^
| ^
| Internet Settings &rarr;  Graph File Settings
| Internet Settings &rarr;  Graph File Settings
| dailyrain.json &rarr; File Transfer
| alldailywinddata.json &rarr; File Transfer
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alldailywinddata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
|-  
| Ftp-wxnow=0
| Ftp-alltempsumdata=0
| [FTP site]
| [FTP site]
| Release 3.10.0
| Release 3.10.0
| ^ (disabled)
| ^
| (depends on release)
| Internet Settings &rarr; Graph File Settings
* (release 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
| alltempsumdata.json &rarr; File Transfer
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
| 1 (enabled)
| wxnow.txt &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer that file to your local web server
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[alltempsumdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-availabledata=0
| [FTP site]
| Release 3.10.0
| ^ (once only)
| Internet Settings &rarr;  Graph File Settings
| availabledata.json  &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[availabledata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
| ForumURL=
| Ftp-dailyrain=0
| [Web Site]
| Legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Site
* (release 3.12.0 on)  Internet Settings &rarr; Miscellaneous
| Forum URL
| (blank)
| Left blank to allow you to choose format
 
3.10.0 Default web pages use "<a href=\"https://cumulus.hosiene.co.uk/index.php\">forum</a>"
 
Some alternative URL examples:
*https://cumulus.hosiene.co.uk/index.php (for above example in default web pages)
*https://cumulus.hosiene.co.uk
*https://cumulus.hosiene.co.uk/search.php?search_id=active_topics
|-
| FTPlogging=0
| [FTP site]
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| FTP logging
| ^
| Depends on release installed:
| Internet Settings &rarr;  Graph File Settings
# (Releases 3.1.0 to 3.10.5) Internet Settings &rarr;  &rarr; Web Settings &rarr; General Settings
| dailyrain.json &rarr; File Transfer
# (Releases 3.11.0 to 3.11.4) Program Settings &rarr; Program General Options
| 1 (enabled)
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| (n/a)
| (n/a)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX in standard FTP mode add output to [[ftplog.txt]].
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable updates to '''ftplog.txt'''
|-  
For other types of file transfer (STTP, FTPS), any extra diagnostic information appears in latest log in [[MXdiags folder]]
| Ftp-dailytemp=0
|-
| FTPRename=1
| [FTP site]
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| (always)
| ^
| (depends on release)
| Internet Settings &rarr; Graph File Settings
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
| dailyrain.json &rarr; File Transfer
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| FTP rename
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
The chief advantage of using rename is that it minimises the time that the web server cannot serve a file (while it is being updated)
|-  
|-
| Ftp-graphconfig=0
| Host=
| [FTP site]
| [FTP site]
| Legacy Cumulus
| Release 3.10.0
| (always)
| ^ (once only)
| Internet Settings &rarr; Web/FTP Site
| Internet Settings &rarr; Graph File Settings
| Host name
| graphconfig.json &rarr; File Transfer
| (blank)
| 1 (enabled)
| This is either the name, or the IP address, of the ftp server to which you connect when you upload pages to your web site.
|-
| IncludeMoonImage=1
| [FTP site]
| Release 3.5.0
| (always)
| Internet Settings &rarr; Moon Image
| Upload Moon image file
| 0 (disabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer moon image file to your local web server (need to select "Generate Moon Image" too)
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[graphconfig.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-
|IntervalFtpEnabled=1
| Ftp-humdata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.10.0
| ??
| ^
| Internet Settings &rarr; Interval Settings
| Internet Settings &rarr; Graph File Settings
| Enable file transfer update interval
| humdata.json &rarr; File Transfer
| 1 (enabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file transfer actions
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[humdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected '''LocalCopyEnabled''' (see below)
|-
| ListWebTags=0
| [Station]
| Legacy Cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to create ''WebTags.txt'' file when Cumulus is restarted (contains an unordered list of all the tag names your Cumulus build will recognise and process)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| LocalCopyEnabled=0
| Ftp-pressdata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.10.0
| (always)
| ^
| Internet Settings &rarr; Interval Configuration
| Internet Settings &rarr; Graph File Settings
| Enable local copy update interval
| pressdata.json &rarr; File Transfer
| 0 (disabled)
| 1 (enabled)
| Simple tick or not
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file copy actions
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[pressdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected file transfer '''IntervalFtpEnabled''' (see previous)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
|-  
| LocalCopyFolder=
| Ftp-raindata=0
| [FTP site]
| [FTP site]
| Release 3.12.0
| Release 3.10.0
| (always)  
| ^
| Internet Settings &rarr; Interval Configuration
| Internet Settings &rarr;  Graph File Settings
| (blank)
| raindata.json &rarr; File Transfer
| Folder (including path) to which MX will copy the standard files (see rows marked ^ for further selections) if 'EnableLocalCopy' is enabled
| 1 (enabled)
|-
| Simple tick or not
| Password=
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[raindata.json]] file to your local web server (need to select "Generate" too)
| [FTP site]
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Legacy Cumulus
|-
| (always)  
| Ftp-solardata=0
| Internet Settings &rarr; Web/FTP Site
| [FTP site]
| Password
| Release 3.10.0
| (blank)
| ^
| The password for your FTP/SFTP/FTPS connection (masked out on settings page, shown in plain text in file)
| Internet Settings &rarr;  Graph File Settings
|-
| solardata.json &rarr; File Transfer
| Port=21
| 0 (disabled)
| [FTP site]
| Simple tick or not
| Legacy Cumulus
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[solardata.json]] file to your local web server (need to select "Generate" too)
| (always)  
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
| Internet Settings &rarr; Web/FTP Site
|-
| FTP port
| Ftp-sunhours=0
| 21 (plain FTP)
| [FTP site]
|you normally use either standard FTP (port=21), SSH for FTP i.e. SFTP (port=22), or SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) i.e.FTPS (port=990 normally, may be 25). If you get connection refused, messages in the MXdiags log, then you may need to try alternative protocol and/or alternative ports.
| Release 3.10.0
|-
| ^
| RealtimeFTPEnabled=0
| Internet Settings &rarr;  Graph File Settings
| [FTP site]
| sunhours.json &rarr; File Transfer
| Legacy Cumulus
| 0 (disabled)
| ^
| Simple tick or not
| Internet Settings &rarr; Realtime Settings
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[sunhours.json]] file to your local web server (need to select "Generate" too)
| Enable realtime FTP
* Don't tick (value shown as 0 in Cumulus.ini) to disable (e.g. if you don't have a solar sensor)
| 0 (disabled)
|-
| Simple tick or not
| Ftp-tempdata=0
* Tick (value shown as 1 in Cumulus.ini) for MX to be able to do file transfers at real-time interval
| [FTP site]
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Release 3.10.0
|-  
| ^
| RealtimeGaugesTxtCopy=0
| Internet Settings &rarr;  Graph File Settings
| [FTP site]
| tempdata.json &rarr; File Transfer
| Release 3.12.0
| 1 (enabled)
| ^
| Simple tick or not
| Internet Settings &rarr; Realtime Settings
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[tempdata.json]] file to your local web server (need to select "Generate" too)
| realtimegauges.txt
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| 0 (disabled)
|-
| Simple tick or not
| Ftp-wdirdata=0
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[SteelSeries_Gauges|realtimegauges.txt]] file to your local web server (need to select "Generate" too)
| [FTP site]
* Don't tick (value shown as 0 in Cumulus.ini) to disable
| Release 3.10.0
|-
| ^
| RealtimeGaugesTxtCreate=0
| Internet Settings &rarr;  Graph File Settings
| [FTP site]
| wdirdata.json &rarr; File Transfer
| Release 3.10.0
| 1 (enabled)
| ^
| Simple tick or not
| Internet Settings &rarr; Realtime Settings
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[wdirdata.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-websitedata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Standard File Settings
| websitedata.json &rarr; File Transfer
| 0 (disabled)
| Relates to asking MX to process the [[websitedataT.json]] file in [[web folder]]
 
Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the resulting websitedata.json to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-winddata=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr;  Graph File Settings
| dailyrain.json &rarr; File Transfer
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer the [[dailyrain.json]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| Ftp-wxnow=0
| [FTP site]
| Release 3.10.0
| ^ (disabled)
| (depends on release)
* (release 3.10.0 to 3.11.4) Internet Settings &rarr; Web/FTP Settings
* (release 3.12.0 on) Internet Settings &rarr; Standard File Settings
| wxnow.txt &rarr; File Transfer
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer that file to your local web server
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| ForumURL=
| [Web Site]
| Legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Site
* (release 3.12.0 on)  Internet Settings &rarr; Miscellaneous
| Forum URL
| (blank)
| Left blank to allow you to choose format
 
3.10.0 Default web pages use "<a href=\"https://cumulus.hosiene.co.uk/index.php\">forum</a>"
 
Some alternative URL examples:
*https://cumulus.hosiene.co.uk/index.php (for above example in default web pages)
*https://cumulus.hosiene.co.uk
*https://cumulus.hosiene.co.uk/search.php?search_id=active_topics
|-
| FTPlogging=0
| [FTP site]
| Legacy Cumulus
| FTP logging
| Depends on release installed:
# (Releases 3.1.0 to 3.10.5) Internet Settings &rarr;  &rarr; Web Settings &rarr; General Settings
# (Releases 3.11.0 to 3.11.4) Program Settings &rarr; Program General Options
# (Release 3.12.0 onwards) Program Settings &rarr; Logging Options
| (n/a)
| (n/a)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX in standard FTP mode add output to [[ftplog.txt]].
to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable updates to '''ftplog.txt'''
For other types of file transfer (STTP, FTPS), any extra diagnostic information appears in latest log in [[MXdiags folder]]
|-
| FTPRename=1
| [FTP site]
| Legacy Cumulus
| (always)
| (depends on release)
* (releases 3.0.0 to 3.11.4)  Internet Settings &rarr; Web Settings &rarr; General Settings
* (release 3.12.0 on)  Internet Settings &rarr; Web Site &rarr; General Settings
| FTP rename
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to issue instruction to the web server so it creates the new file with a new name and then renames it to the required name  (this is the option appropriate to most servers)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
The chief advantage of using rename is that it minimises the time that the web server cannot serve a file (while it is being updated)
|-
| Host=
| [FTP site]
| Legacy Cumulus
| (always)
| Internet Settings &rarr; Web/FTP Site
| Host name
| (blank)
| This is either the name, or the IP address, of the ftp server to which you connect when you upload pages to your web site.
|-
| IncludeMoonImage=1
| [FTP site]
| Release 3.5.0
| (always)
| Internet Settings &rarr; Moon Image
| (FTP) Upload Moon image file
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to file transfer moon image file to your local web server (need to select "Generate Moon Image" see '''MoonImageEnabled=''' too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| IntervalFtpEnabled=1
| [FTP site]
| Release 3.12.0
| ??
| Internet Settings &rarr; Interval Settings
| Enable file transfer update interval
| 1 (enabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file transfer actions
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected '''LocalCopyEnabled''' (see below)
|-
| ListWebTags=0
| [Station]
| Legacy Cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
| 0
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to create ''WebTags.txt'' file when Cumulus is restarted (contains an unordered list of all the tag names your Cumulus build will recognise and process)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| LocalCopyEnabled=0
| [FTP site]
| Release 3.12.0
| (always)
| Internet Settings &rarr; Interval Configuration
| Enable local copy update interval
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to make standard interval file copy actions
* Don't tick (value shown as 0 in Cumulus.ini) if either no web server, or have selected file transfer '''IntervalFtpEnabled''' (see previous)
|-
| LocalCopyFolder=
| [FTP site]
| Release 3.12.0
| (always)  
| Internet Settings &rarr; Interval Configuration
| (blank)
| Folder (including path) to which MX will copy the standard files (see rows marked ^ for further selections) if 'EnableLocalCopy' is enabled
|-
| MoonImageEnabled=1
| [Graphs]
| Release 3.5.0
| (always)
| Internet Settings &rarr; Moon Image
| Generate Moon Image
| ^ Default controlled by selection of default web site
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to use System Drawing to modify CumulusMX/web/MoonBaseImage.png and create CumulusMX/web/moon.png
* Don't tick (value shown as 0 in Cumulus.ini) if you don't need MX to create a "moon.png"
|-
| MoonImageSize=
| [Graphs]
| Release 3.5.0
| (always)
| Internet Settings &rarr; Moon Image
| Image size
| ???
| Enter a size (in pixels) for the generated moon image (according to space on your web page)
|-
| Password=
| [FTP site]
| Legacy Cumulus
| (always)  
| Internet Settings &rarr; Web/FTP Site
| Password
| (blank)
| The password for your FTP/SFTP/FTPS connection (masked out on settings page, shown in plain text in file)
|-
| Port=21
| [FTP site]
| Legacy Cumulus
| (always)  
| Internet Settings &rarr; Web/FTP Site
| FTP port
| 21 (plain FTP)
|you normally use either standard FTP (port=21), SSH for FTP i.e. SFTP (port=22), or SSL/TLS (deprecated Secure Sockets Layer and replacement Transport Layer Security) i.e.FTPS (port=990 normally, may be 25). If you get connection refused, messages in the MXdiags log, then you may need to try alternative protocol and/or alternative ports.
|-
| RealtimeFTPEnabled=0
| [FTP site]
| Legacy Cumulus
| ^
| Internet Settings &rarr; Realtime Settings
| Enable realtime FTP
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to be able to do file transfers at real-time interval
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-  
| RealtimeGaugesTxtCopy=0
| [FTP site]
| Release 3.12.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt
| 0 (disabled)
| Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) for MX to copy the [[SteelSeries_Gauges|realtimegauges.txt]] file to your local web server (need to select "Generate" too)
* Don't tick (value shown as 0 in Cumulus.ini) to disable
|-
| RealtimeGaugesTxtCreate=0
| [FTP site]
| Release 3.10.0
| ^
| Internet Settings &rarr; Realtime Settings
| realtimegauges.txt &rarr; Generate
| realtimegauges.txt &rarr; Generate
| 0
| 0
Line 3,876: Line 3,968:
| Depends on release:
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings &rarr; Common Options &rarr; Advanced options
* (3.12.0 onwards) '''Two places''':
| Record set timeout
*# Station setings &rarr; General Settings &rarr; Advanced options
*# Station settings &rarr; Common Options &rarr; Advanced options
| Depends on where changed (respectively):
# New record timeout
# Record set timeout
| 24
| 24
| Number of hours before the following web tags are reset: TempRecordSet, WindRecordSet, RainRecordSet, HumidityRecordSet, PressureRecordSet, HighTempRecordSet, LowTempRecordSet, HighAppTempRecordSet, LowAppTempRecordSet, HighHeatIndexRecordSet, LowWindChillRecordSet, HighMinTempRecordSet, LowMaxTempRecordSet, HighDewPointRecordSet, LowDewPointRecordSet, HighWindGustRecordSet, HighWindSpeedRecordSet, HighRainRateRecordSet, HighHourlyRainRecordSet, HighDailyRainRecordSet, HighMonthlyRainRecordSet, HighHumidityRecordSet, HighWindrunRecordSet, LowHumidityRecordSet, HighPressureRecordSet, LowPressureRecordSet, LongestDryPeriodRecordSet, LongestWetPeriodRecordSet, HighTempRangeRecordSet, LowTempRangeRecordSet
| Number of hours before the following web tags are reset: TempRecordSet, WindRecordSet, RainRecordSet, HumidityRecordSet, PressureRecordSet, HighTempRecordSet, LowTempRecordSet, HighAppTempRecordSet, LowAppTempRecordSet, HighHeatIndexRecordSet, LowWindChillRecordSet, HighMinTempRecordSet, LowMaxTempRecordSet, HighDewPointRecordSet, LowDewPointRecordSet, HighWindGustRecordSet, HighWindSpeedRecordSet, HighRainRateRecordSet, HighHourlyRainRecordSet, HighDailyRainRecordSet, HighMonthlyRainRecordSet, HighHumidityRecordSet, HighWindrunRecordSet, LowHumidityRecordSet, HighPressureRecordSet, LowPressureRecordSet, LongestDryPeriodRecordSet, LongestWetPeriodRecordSet, HighTempRangeRecordSet, LowTempRangeRecordSet
Line 4,008: Line 4,104:


Since MX is being developed by someone who uses a Davis station, a lot of "Labels on the Settings Screens" mention "Davis" even if you have selected a different station, because the code was written by copy and paste!
Since MX is being developed by someone who uses a Davis station, a lot of "Labels on the Settings Screens" mention "Davis" even if you have selected a different station, because the code was written by copy and paste!
=== Solar===
Cumulus MX is unable to work out if you have a solar sensor, so these options are always displayed.
{| class="wikitable" border="1"
|-
!style="width:30px" | Parameter Line Entry
!style="width:100px" | File Section
!style="width:100px" | Introduced
!style="width:100px" | MX Section
!style="width:60px" | Label on Settings page
!style="width:20px" | Default
!style="width:800px" | Description
|-
| SolarCalc=0
| [Solar]
| 3.13
| Station Settings &rarr; Solar
| Solar Calculation Method
|  0=Ryan-Stololzenbach
| Drop-down list:
*  0=Ryan-Stololzenbach
* 1=Bras
|-
| SunThreshold=75
| [Solar]
| 3.13
| Station Settings &rarr; Solar
| Sun Threshold (percent)
| 75
| Enter a number
|-
| SolarMinimum=0
| [Solar]
| 3.13
| Station Settings &rarr; Solar
| Solar minimum (W/m2)
| 30
| Enter a number
|-
| RStransfactorJul=0.80000000000000004
| [Solar]
| 3.14
| Station Settings &rarr; Solar
| RS Transmission factor (June)
(Note the internal calculation does apply this to June, but some MX releases were incorrectly typed to say "July" on the settings screen).
| 0.8
| MX does a sinusoidal interpolation between this value and the next. So this June factor changes very little either side of that solstice, with the average value from both factors applying at the equinoxes (March and September) and different amounts of each factor each side of equinox.  (So actually more like a cosine interpolation!)
|-
| RStransfactorDec=0.80000000000000004
| [Solar]
| 3.14
| Station Settings &rarr; Solar
| RS Transmission factor (December)
| 0.8
| MX does a sinusoidal interpolation between last value and this one. So this December factor changes very little either side of that solstice,  with the average value from both factors applying at the equinoxes (March and September) and different amounts of each factor each side of equinox.  (So actually more like a cosine interpolation!)
|-
| UseBlakeLarsen=0
| [Solar]
| Legacy
| Extra Sensor Settings
| Blake-Larsen Sunshine Recorder
| 0=deselected
| checkbox
|}


===Selecting the weather station type determines which options are shown===
===Selecting the weather station type determines which options are shown===
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
Line 4,095: Line 4,258:


{{Template:WorkInProgressBanner}} This table does not yet have all details in it.
{{Template:WorkInProgressBanner}} This table does not yet have all details in it.
* Introduced for leagacy Cumulus
* Introduced for legacy Cumulus
* File Section is [Station]
* File Section is [Station]
* Only "Shown on Settings page" if either "Type=0" or "Type=1"
* Only "Shown on Settings page" if either "Type=0" or "Type=1"
Line 4,519: Line 4,682:
It is assumed that [[Cumulus.ini_(Cumulus_1)#La_Crosse_specific:|most parameters remain same]]
It is assumed that [[Cumulus.ini_(Cumulus_1)#La_Crosse_specific:|most parameters remain same]]


===WM918/WMR928 Settings===
===Oregon Scientific WM918/WMR928 Settings===


Oregon Scientific specific
The Oregon Scientific code has not changed since the earliest beta MX (3.0.0) builds based on moving compiled code from Cumulus 1. 
 
{{Template:WorkInProgressBanner}} This table has not been populated yet, needs a contributor who uses this type of weather station
 
* Introduced for legacy Cumulus
* File Section is [Station]


It appears very few current Cumulus users own these obsolete models, so all these settings have to be added directly into the file, you can't edit them in the admin interface, and they will be missing from any configuration file created by any MX release.


* Introduced for legacy Cumulus, and unchanged by MX
* File Section is [Station], these settings need to be manually entered into file below that section heading
{| class="wikitable" border="1"
{| class="wikitable" border="1"
|-
|-
!style="width:30px" | Parameter Line Entry
!style="width:30px" | Parameter Line Entry
!style="width:100px" | Label on Settings page
!style="width:100px" | External to MX edit
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:300px" | Description
!style="width:300px" | Description
Line 4,542: Line 4,703:
|-
|-
|Humidity98Fix=0  
|Humidity98Fix=0  
|
| Stop MX and add this into file
|0 (disable)
|0 (disable)
|Applies to weather station types that never report more than 98% relative humidity.
|Applies to weather station types that never report more than 98% relative humidity.
Line 4,549: Line 4,710:
|-
|-
|LogExtraSensors=0
|LogExtraSensors=0
|
| Stop MX and add this into file
|0 (disable)
|0 (disable)
|This setting determines whether MX looks for readings from extra temperature probes etc.  
|This setting determines whether MX looks for readings from extra temperature probes etc.  
Line 4,556: Line 4,717:
|-
|-
|WMR928TempChannel=N
|WMR928TempChannel=N
|
| Stop MX and add this into file
|(no default)
|(by default no extra sensors)
|for WMR-928 stations (and other serial stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
|for WMR-928 stations (and other serial stations using the same protocol, eg WMR-968) to use an 'extra' channel  (see previous parameter) as your main temperature sensor, set N to the required channel
|-
|-
|WMR200TempChannel=N
|WMR200TempChannel=N
|
| Stop MX and add this into file
|(no default)
|(by default no extra sensors)
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
|for WMR200 stations (and any other Oregon Scientific USB stations which work with Cumulus, e.g. WMR100) to use an 'extra' channel as your main temperature sensor, set N to the required channel
|}
|}
Line 4,621: Line 4,782:
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate wind chill from temperature and wind speed
* Tick (value shown as 1 in Cumulus.ini) then Cumulus will calculate wind chill from temperature and wind speed
** Note that there is a maximum temperature, and minimum wind speed, for Cumulus to make the calculation, see [[Wind_chill]] page
** Note that there is a maximum temperature, and minimum wind speed, for Cumulus to make the calculation, see [[Wind_chill]] page
* Don't tick (value shown as 0 in Cumulus.ini) action depends on '''Calibration settings'''
* Don't tick (value shown as 0 in Cumulus.ini) action depends on other items:
** If Cumulus has non-default multiplier and/or offset settings for temperature or wind speed, Cumulus will calculate wind chill
** If Cumulus has non-default multiplier and/or offset settings for temperature or wind speed, Cumulus will calculate wind chill
** If station provides wind chill, then that will be used provided no multiplier/offsets have been specified for temperature or wind speed
** If station does NOT make a wind chill value available to Cumulus,  Cumulus MX reports an error if you have not ticked this setting, (that is different to how the setting worked with the legacy software).
Note that some stations (Fine Offset, for example), do not make a wind chill value available to Cumulus. For these, Cumulus always calculates it.
** If station provides wind chill, then that value will be used provided no multiplier/offsets have been specified for temperature or wind speed.
|-
|-
| ChillHourSeasonStart=
| ChillHourSeasonStart=
| Legacy Cumulus
| Legacy Cumulus
| (TO BE DETERMINED)
| Chill Hours
|
| Chill Season Starts
| Default depends on release
| Default depends on release
* (up to 3.11.4) 10 = October
* (up to 3.11.4) 10 = October
Line 4,637: Line 4,798:
| ChillHourThreshold=
| ChillHourThreshold=
| Legacy Cumulus
| Legacy Cumulus
| (TO BE DETERMINED)
| Chill Hours
|
| Chill Hours
| Default depends on Temperature Units
| Default depends on Temperature Units
* Either 45 degrees Fahrenheit (equivalent to 7.22 <sup>o</sup>Celsius)
* Either 45 degrees Fahrenheit (equivalent to 7.22 <sup>o</sup>Celsius)
Line 4,677: Line 4,838:
| Humidity98Fix=0
| Humidity98Fix=0
| Legacy Cumulus
| Legacy Cumulus
| (TO BE DETERMINED)
| Common Options
| n/a
| Max humidity
| 0 (disable)
| 0 (disable)
| For any weather station that never reports a relative humidity greater than 98%
| For any weather station that never reports a relative humidity greater than 98%
Line 4,717: Line 4,878:
| RainDayThreshold=
| RainDayThreshold=
| Legacy Cumulus
| Legacy Cumulus
| (TO BE DETERMINED)
| Common Options &rarr; Advanced Options
| n/a
| Rain day threshold
| (TO BE DETERMINED)
| Default is -1 which depends on Rainfall Units AND station type
* -1 = normally 0.2 if units are millimetres
* -1 = normally 0.01 if units are inches
* Otherwise enter a value in your selected units
| For derivatives like count of consecutive wet/dry days, any daily rainfall less than this threshold will be ignored.
| For derivatives like count of consecutive wet/dry days, any daily rainfall less than this threshold will be ignored.


Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/9640...10498"

Navigation menu