Cumulus Wiki

Cumulus.ini: Difference between revisions

Cumulus.ini (view source)

Revision as of 08:09, 21 July 2021

993 bytes added ,  08:09, 21 July 2021
m
→‎Data Logging
Line 1,910: Line 1,910:
!style="width:20px" | Default
!style="width:20px" | Default
!style="width:600px" | Description
!style="width:600px" | Description
|-
| StartDate=
| (with warning: "Here be dragons!")
| Station Settings → Advanced Options
| Records Began date
| (Set when you first use Cumulus)
| Format used is determined by locale used for running MX.  If this date is edited, keep to same format. MX generally (see [[Calculate_Missing_Values#CreateMissing.exe]] for exceptions) ignores any data file entries prior to this date.
|-
| NoSensorCheck=0
| (not yet on a settings page)
| (not known)
| (not known)
| 0 (normal)
| Boolean:
* 0 = MX will stop if any of the minimum set of sensors listed below fails
* 1 = MX will continue to run, even if any of the minimum set of sensors listed below fails
Minimum set of sensors:
# Current air temperature
# Current Relative Humidity
# At least one wind speed
# Current air pressure (absolute or sea-level)
Cumulus will stop processing any information from a weather station unless the above 4 source values are being supplied and reveal they are being updated (failure is set is after a total of 6 unsuccessful consecutive attempts to read each of these).
|-
| UseDataLogger=1
| (probably determined by station type)
| (not known)
| (not known)
| 1 (enabled)
|Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if your weather station has its own storage, so MX can do a catch up when it first starts and read any "archive data"
* Don't tick (value shown as 0 in Cumulus.ini) if your weather station has no storage, and therefore MX cannot capture any readings when it is not running
|-
|-
| DataLogInterval=2
| DataLogInterval=2
Line 1,964: Line 1,932:
* Tick (value shown as 1 in Cumulus.ini) if your weather station can output readings to be logged in [[Extra Sensor Files]]
* Tick (value shown as 1 in Cumulus.ini) if your weather station can output readings to be logged in [[Extra Sensor Files]]
* Don't tick (value shown as 0 in Cumulus.ini) if you have nothing to log to Extra Sensor Files.
* Don't tick (value shown as 0 in Cumulus.ini) if you have nothing to log to Extra Sensor Files.
|-
| NoSensorCheck=0
| (not yet on a settings page)
| (not known)
| (not known)
| 0 (normal)
| Boolean:
* 0 = MX will stop if any of the minimum set of sensors listed below fails
* 1 = MX will continue to run, even if any of the minimum set of sensors listed below fails
Minimum set of sensors:
# Current air temperature
# Current Relative Humidity
# At least one wind speed
# Current air pressure (absolute or sea-level)
Cumulus will stop processing any information from a weather station unless the above 4 source values are being supplied and reveal they are being updated (failure is set is after a total of 6 unsuccessful consecutive attempts to read each of these).
|-
| RainDayThreshold=-1
| (with warning: "Here be dragons!")
| legacy cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings → Common Options → Advanced options
|-1 (that represents 0.2 mm or 0.01 inches)
| The amount of rainfall that must be collected before MX treats today as a wet day
''The intention is this will represent more than one tip,as the first tip might contain some rain from an earlier day''
|-
|-
| RolloverHour=0
| RolloverHour=0
Line 1,973: Line 1,969:
* 0 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches midnight
* 0 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches midnight
* 1 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time
* 1 = MX will do [[MX_Basic_info#MX_End_of_Day_Process|an end of day process]] when the time (on Weather Station if it provides time) reaches 9 a.m. local standard/winter time
|-
| SnowDepthHour=0
| (with warning: "Here be dragons!")
| legacy cumulus
| Only from Release 3.12.0
| Depends on release:
* (3.5.1 to 3.11.4) Manual edit of file
* (3.12.0 onwards) Station settings → Common Options → Advanced options
| Snow depth hour
| 0 (midnight)
| Spin selector of 0 to 23: Defines hour from which entries in [[Weather Diary]] for current calendar day are used. Prior to this hour the weather diary will be searched for Calendar yesterday
|-
| StartDate=
| (with warning: "Here be dragons!")
| Station Settings → Common Options → Advanced Options
| Records Began date
| (Set when you first use Cumulus)
| Format used is determined by locale used for running MX.  If this date is edited, keep to same format. MX generally (see [[Calculate_Missing_Values#CreateMissing.exe]] for exceptions) ignores any data file entries prior to this date.
|-
| UseDataLogger=1
| (probably determined by station type)
| (not known)
| (not known)
| 1 (enabled)
|Simple tick or not
* Tick (value shown as 1 in Cumulus.ini) if your weather station has its own storage, so MX can do a catch up when it first starts and read any "archive data"
* Don't tick (value shown as 0 in Cumulus.ini) if your weather station has no storage, and therefore MX cannot capture any readings when it is not running
|-
|-
| Use10amInSummer=1
| Use10amInSummer=1
Sfws
5,838

edits

Retrieved from "https://www.cumuluswiki.org/a/Special:MobileDiff/9501"