MX on Linux: Difference between revisions

15,238 bytes removed ,  20 September 2023
 
(56 intermediate revisions by 4 users not shown)
{{Template:WorkInProgressBanner}}{{Template:Version badge Mx}}
 
'''This page focuses on aspects of MX that are specific to the Linux operating systems.'''
 
If you are running MX on on any computer running the Microsoft Windows Operating System, then you should be reading the [[MX on Windows OS]] page instead.
 
{{TOCright}}
=Page Content=
 
This page:
* describes the options available for installing MX, and the other Cumulus packages
* describes the pre-requisite '''MONO''' software needed to run the various Cumulus executables, (for Raspberry Pi only), how to add the Mono repository to your system, and how to upgrade MONO
* explains the few key Linux commands it uses
* describes the administrative interface and instructions for configuring MX
* it tries to be useful to anyone who has never used MX, and anyone who knows Cumulus, but has not run MX on Linux before
* describes the various options available to run MX
* describes the optional parameters you can add when starting MX
* describes the other executables
 
There are various related pages to get more information:
*Go to [[:Category:Terminology]] for links to pages that explain terminology used by Cumulus (some of these need updating for MX)
*Go to [[:Category:Cumulus MX]] for links to all pages in this Cumulus Wiki that relate specifically to MX
*[[MX Administrative Interface|Admin interface]] provides information on configuration and web pages for viewing your weather data locally
*Go to [[:Category:Cumulus Files]] for links to all pages describing the sub-folders and files used by MX
*If you encounter a problem when running MX, see [[What to do when I have a problem with MX]]
*The [[Cumulus MX FAQ]] page was created with snippets from the forum, but nobody has yet sorted this out into a useful page or updated it for recent releases
*If you were using the original (now legacy) Cumulus software, please read [[Migrating_from_Cumulus_1_to_MX]], although that is mostly directed at those using MX on the same Windows PC as they used for Cumulus 1, and was written for an old MX release, it will help you understand configuration differences.
*If you want to use a script language, you might want to read [[PHP|PHP Hypertext Pre-processor and JavaScript]] page
 
=Using MX on UNIX-derived Operating Systems=
[[Category:Cumulus MX]]
 
MX runs on any UNIX-derived operating systems (OS):
* including those found on Apple Mac computers,
* and those found on a multitude of devices running Linux.
 
UNIX is a long established operating system, and both UNIX and its derivatives have good long term compatibility. This means that commands are generally easy to learn andjust use.once Mostand devicesthen also have a graphical user interface thatyou can donormally thecontinue moreto straightforwarduse taskswhat withoutyou needinghave tolearnt. know all the commands.
 
Most devices also have a graphical user interface that can do the more straightforward tasks without needing to know all the commands.
==Device Coverage==
 
Linux is available based on a multitude of different kernels (the building block for the operating system), on a multitude of devices.
 
It is hoped that contributions to this page will be made by Cumulus users with a range of such devices. The page has been originated by a contributor using the Raspberry Pi Operating System (this is based on Debian, one of the Linux kernels). Where appropriate, this page gives instructions specific to a [[Raspberry Pi computer page|Raspberry Pi computer]].
 
:Until somebody creates a separate page for Apple Mac computers (that would be a good idea), this page is the closest.
 
==WhatWhy do people think aboutinstall MX on Linux?==
 
Contributions to the [https://cumulus.hosiene.co.uk/viewforum.php?f=40 Cumulus Support Forum] suggest that:
*Use on a Raspberry Pi (RPi) computer is very popular
*In general, people find installing, and running, MX on Linux is easy
*The few people who do have difficulties are those who have good knowledge of Microsoft systems and feeltherefore scaredare toso convinced they cannot cope with a swap to something different., that they give up too easily!
 
Microsoft has had a deliberate policy of being different to traditional computers (all others are mostly based on UNIX,). and the [[MX_on_Windows_OS|Running Cumulus MX on Microsoft Windows]] page covers those aspects of MX that are specific to Personal Computers running Microsoft's Windows Operating System.
 
You may know that this Wiki started with a single page covering MX regardless on which operating system was used, that did not work.
In the Cumulus support forum, there are many posts from people who are struggling with MX on PCs, as it seems people often find “installing”, and using, MX is more difficult when using Microsoft Windows.
 
If you are running MX on on any computer running the Microsoft Windows Operating System, then you should be reading the [[MX on Windows OS]] page instead. In the Cumulus support forum, there are many posts from people who are struggling with MX on PCs. It appears this is not because Microsoft computers are so more readily available and therefore known about; but because people often find “installing”, and using, MX is more difficult when using the more complex Microsoft Windows operating system, and people tend not to understand basic issues such as avoiding "Program Files".
=For those using Raspberry Pi computers=
 
You have two choices:
 
{{Template:Version badge Mx}}'''This page focuses on aspects of MX that are specific to the Linux operating systems.'''
CHOICE ONE: ‘’’Create a micro-SD card that has everything on it to load a kernel onto your computer and run MX’’’
 
Still believe it will be too complex for you? The developer has created [[Software#Raspberry_Pi_Image|an image you can download]] for those prepared to run two computers (a RPi for actually running MX and another computer for all interactions with MX). Read all about it, on [[Raspberry_Pi_Image]] page, and decide if that is for you.
 
==Device Coverage==
That image contains:
#Raspberry Pi Lite Operating System as kernel (no graphical user interface, designed for a RPi without keyboard or monitor)
#Mono-complete package
#Cumulus MX package
 
Linux is available based on a multitude of different kernels (the building block for the operating system), on a multitude of devices.
* If you are new to MX, after booting from image, you will need to use the [[MX_Administrative_Interface#Station_Settings|admin interface]] to define station type, your choice of units, and some other settings, before MX can start recording data from the connected weather station.
* If you are migrating from another computer, after booting from image, you need to add (using an external memory stick or file transfer from your other device to the RPi), the following:
** (mandatory) [[Cumulus.ini]],
**(optional) [[strings.ini]],
**(mandatory) all files from old [[Data_folder|data sub-folder]],
**and any (optional) files from old Reports sub-folder.
 
This page has been originated by a contributor using the Raspberry Pi Operating System (this is based on Debian, one of the Linux kernels). Be aware therefore that some instructions on this page are specific to a [[Raspberry Pi computer page|Raspberry Pi computer]] with its default operating system.
If you want to pursue that approach, please read [[Raspberry_Pi_Image]] page, instead of continuing to read this page. Obviously, you can return to this page if you want to learn more.
 
For other devices, the inclusion of the correct instructions is totally dependent on whether any contributor has edited this page to cover your device in the context of that section of this page. It is hoped that contributions to this page will be made by Cumulus users with a range of different devices so this page is useful to more people.
CHOICE TWO: ‘’’Load the software packages individually’’’
 
:Until somebody creates a separate page for Apple Mac computers (that could be a good idea, as there are some significant differences), this page is the best source of advice.
Please read on, this page will tell you all you need to know.
 
==Further Information==
= Do you have a Operating System? =
 
There are various related pages to get more information:
New hardware might come preloaded with an operating system, or might allow you to choose which operating system to install on it.
* If you encounter a problem when running MX, please see [[What to do when I have a problem with MX]]
* If MX gives you a message saying "you are not running the latest version", please see [[Updating_MX_to_new_version|Guide to upgrading MX]]
* If you are puzzled by the terminology, please see [[:Category:Terminology]] for links to pages that explain terminology used by Cumulus (these pages were written for the legacy Cumulus 1 and may need updating for MX)
* If you need to know more about files in the installation, please see [[:Category:Cumulus Files]] for links to all Wiki pages describing the sub-folders and files used by MX
* Go to [[:Category:Cumulus MX]] for links to all pages in this Cumulus Wiki that relate specifically to MX
* [[MX Administrative Interface|Admin interface]] provides information on configuration and web pages for viewing your weather data locally
* The [[Cumulus MX FAQ]] page was created with snippets from the forum, but nobody has yet sorted this out into a useful page or updated it for recent releases
* If you were using the original (now legacy) Cumulus software, please read [[Migrating_from_Cumulus_1_to_MX]], although that is mostly directed at those using MX on the same Windows PC as they used for Cumulus 1, and was written for an old MX release, it will help you understand configuration differences.
* If you want to use a script language, you might want to read [[PHP|PHP Hypertext Pre-processor and JavaScript]] page
* If you will be using the standard web pages (from release 3.10.1) see [[New_Default_Web_Site_Information|this page]]
* If you want to write your own customised templates, read [[Customised_templates]].
* If you want to explore alternative web pages from third-parties, start [[:Category:User Contributions|on User Contributions page]].
 
Please see [[Raspberry Pi computer page]] if you want guidance on choosing which model to buy and how to install an operating system on those computers, so you are ready to install MX.
 
=Do you know how to install packages?=
 
=Preparing your computer for installing the Cumulus MX suite=
If you already know how to install packages, your computer has the pre-installed image, or you have installed MX before, you will want to skip the sub-sections that follow on here, and continue reading at [[#Cumulus packages]].
 
Please see [[Preparing your Linux computer for MX]] page if you have not installed MX on Linux before.
Otherwise, here is a short technical digression to explain the commands.
 
That page covers:
==The various components to commands for installation==
* [[Preparing your Linux computer for MX#Operating systems|Installing Operating Systems]]
* Package manager
** [[Preparing your Linux computer for MX#Interactive Package management on RPi|Interactive version]]
** [[Preparing your Linux computer for MX#Using Package Manager in terminal mode|Terminal version]]
** [[Preparing your Linux computer for MX#The various components to commands for installation|Commands]]
* [[Preparing your Linux computer for MX#USB HID|Human Interface Devices]]
* [[Preparing your Linux computer for MX#Installing Mono instruction|'''Installing Mono''']]
* [[Preparing your Linux computer for MX#Moving from Microsoft Windows to Linux|Preparing Microsoft Windows files for Linux]]
* [[Preparing your Linux computer for MX#File Names & Paths|Guide to file names and paths]]
 
Linux computers have a “source list” which references the repositories from which software packages can be installed.
 
If a particular package can not be found in repositories already in the source list, then another repository can be added to the source list.
 
Please be advised some of the above is rather technical reading, but ''Mono is required to run the Cumulus packages'' described next. So do ensure that you installed Mono before continuing.
===sudo===
 
==Technical aside==
By default, a Linux user will log in as a default user with limited rights. For example, on the Raspberry Pi Operating System, there is a single default user, initially called "Pi", with their home folder that can be referenced as "~".
 
Please note this Wiki page talks about "folders" for compatibility with the [[MX on Windows OS]] page, but Linux prefers to call them directories.
In the '''apt''' context here, '''sudo''' is needed for any action involving writing (such as '''install''', ''full-upgrade'', '''update''', ''autoremove''), but not for actions that just read (such as '''search''', ''show'').
 
Linux has a well defined filesystem, represented as a hierarchic tree starting at the root "/", that is divided into directories (one of which will be "/boot" and hold the kernel), each of those first level directories can be divided into second level directories, this second level is sometimes referenced to as defining the "scope", an indication that each is meant to be used for a specific purpose. The scope can be sub-divided again at lower levels representing "categories" (categories cover items like binary code, documentation, configuration, hardware, source code, runtime and content), and at a lower level still "applications" (i.e. related to specific programs) with further sub-levels for various options within those applications. Many Linux distributions will use logical links so references to a directory at one level in the hierarchy will actually redirect to files in a different directory, this might be because different programs expect to see files in different places or just to enforce ownership and writing rights.
: Elsewhere on this page you might notice [[#Running any MX executable with a terminal session left open|'''cd''']] can move round the file structure (without a "sudo"), but "sudo" is used with [[# Installing/Configuring the MX service and the -service parameter|'''cp''']] as that writes a file.
 
For the purposes of this Wiki, the terminology "operating system" is used for the whole Linux distribution, you will find that Linux technical people prefer to talk about Linux distributions including:
: Novice readers should exercise caution, because changing ownership, adding write rights, using "sudo", and even using "-R" or "-y" flags, can all make it very easy to inadvertently do the wrong action, even perhaps delete vital folders/files.
# a "kernel" for the underlying handling of files, network and so on;
# one or more "shell" components for the handling of commands entered in terminal mode, including those that run programs (whether included in distribution or added later);
# an optional graphical user interface for simpler access to commands and programs.
 
For simplicity the terminology "terminal" is used for how you access the shell, this term refers to seeing the command prompt if your Linux is running without a graphical user interface, or to a window that you can open within the graphical interface where commands can be typed. Depending on your Linux, that window might be called "Terminal", "Konsole", "xterm", "gnome-terminal", "uxterm", or even something else. If you are accessing your Linux computer over a network from a computer running Microsoft Windows, then again you may encounter a number of terms for how to access the shell on your Linux computer, "Command Window", "Windows Powershell", or "Windows Terminal". Equally you may use software that calls it a teletype mode, e.g. PuTTY software.
: '''For technical readers only''', "sudo" is further explained later [[#su_and_sudo]]) as giving super-user (root) rights when executing the instruction that follows for actions on files that are not in the current user's ownership or for which we don't have the necessary (read, write, execute) permissions.
 
=Cumulus packages=
===apt===
 
* This section covers:
The second part of our installation commands is “apt” meaning “Advance Package Tool”. In simple terms, it runs the “package manager” used in Linux.
** CumulusMX.exe
** ExportToMySQL.exe
** CreateMissing.exe
 
(At time of writing this "CreateRecords.exe" is proposed, and under development, but not released).
If you are looking online for a tutorial on how to install packages, you might see “apt-get” or "apt-cache" used in examples they quote. It should be safe to replace these older package managers with "apt". I have included a little technical explanation at the end of this page if this really worries you.
 
===install===
 
==Handling zip files==
The third part of our installation instruction is “install”, which tells our package manager what we are trying to do.
 
Each release is presented as a zip. It does not matter which device (if you have two or more computers), or which browser (it can be default browser for your device or the browser you like best) you use for the download. When your browser saves the zip it might be into a folder called “downloads” on your computer, or you may be able to save into another folder that you prefer (perhaps on a different partition). Your browser might even remember the folder you used before for files of type zip.
Here is full list of what can follow “apt”, as we will use some of the alternatives later:
 
In general, any device will load a suitable application to use to unzip the package when you click on a filename that ends in '''.zip'''. You might need to do a "right click" and choose the application, it depends on your settings.
{| class="wikitable" border="1"
|-
!style="width:30px" | Instruction following “apt”
!style="width:300px" | Description
|-
! scope="row"|install
|To install a package and its dependencies
|-
! scope="row"|update
| The "source list" [[#The various components to commands for installation|mentioned earlier]] that references the repositories from which software packages can be installed, needs to be updated periodically so it reflects any changes within those repositories. The instruction "update" is included after "apt" to make sure your computer has up to date information about repositories installed, and to report if these contain packages that can be upgraded
|-
! scope="row"|upgrade
| Once your "source list" is up to date, the instruction "upgrade" can be included after "apt" to download any newer versions now available in repositories, and to replace those packages that are already installed on your computer with those newer versions. (You cannot upgrade the actual kernel within the operating system with this instruction, so there is no necessity to reboot your Linux computer).
|-
! scope="row"|full-upgrade
| Once your "source list" is up to date, the instruction "full-upgrade" can be included after "apt". The advantage of "full-upgrade" over the simple "upgrade" is that it picks up dependencies, and so results in more components being upgraded. (Again, this does not affect kernel and does not require a computer reboot).
|-
! scope="row"|autoremove
| The instruction "autoremove" can be included after "apt" to check all components in the packages you have installed onto your computer, and remove any components that are not needed by the dependencies of the packages you are using. A download for software frequently includes some components specifically for their software to work with particular other optional packages.
 
Be aware, you may need to adjust the settings within that application for how it handles the file structure. The preferences may determine whether the unzip process preserves the file structure used when the zip was created (i.e. each file remains in any sub-folder) or it ignores the folder structure. For the Cumulus context, it is essential to preserve the folder structure. You may also be asked where you want the files to be extracted to, or the default settings might always use a particular destination (and that might be a '''tmp''' folder).
When we install mono-complete later, the other packages we install do not need every component that has installed, and “autoremove” can be used to tidy up when all our installations are finished.
|-
! scope="row"|remove
|If you want to remove just one component manually, after "apt", use “remove” followed by the name of component you no longer want
|-
! scope="row"|purge
| To remove any installed package and delete all related configuration files, after "apt" type "purge" then the name of the package we no longer want
|-
! scope="row"|search
|To search in repositories in source list for a package you specify after “search”
|-
! scope="row"|show
|To show any information available about a package that you name after the “show”
|}
 
For example on the Raspberry Pi operating system, there is a package called '''xarchiver''', in its Graphical User Interface (GUI), there is a menu called "Action", and the final option in that menu is "Preferences". There, in "Archive" section, you can select "zip" as the preferred archive format (using a drop-down) and whether you want the application to confirm with you before deleting any files; in "Advanced" section, you can select the directory to use for the extraction. If you are using the lite version of the RPi OS, then you need to edit the '''/home/pi/.config/xarchiver/xarchiverrc''' file to set preferences, before you use the archiver package. Once you have started the archiver package, and told it which file to process, you can click on '''Extract files''',
=== Flags ===
the GUI presents a screen of options:
* "Extract to:", use the icon to browse to the required location if it has not been set up in preferences
* "Ensure a containing directory", tick this if it has not been set in the configuration file
* "Files", select "All files", the advice is to overwrite all of any existing files if you are upgrading, but you definitely need all files if this is a new install
* "Options"
** Tick "Extract files with full path", this is essential if you are going to successfully install any of the Cumulus software
** Tick "Overwrite existing files", the advice is to overwrite all of any existing files if you are upgrading, it may not always be clear which files have been updated since an earlier release, and there are a lot of interdependencies between different files
 
It is worth stressing here, if you decide to customise any files that are included in a release distribution, then you should at the very least add something like an "_" character to the file name to make your tailored file different to the standard file. The best practice is to put any files you tailor, or any additional files you create, outside the CumulusMX folder.
The basic syntax is either one or two hyphens, followed by one or two letters (each letter has to be a specific case). Various examples will be seen on this page, but here just one is explained here.
 
If you have chosen to do the download on a different device to that on which you will install, you can unzip on either device. To transfer either the downloaded .zip file, or the extracted file structure, between devices, you can use a file transfer package, or use a portable drive (a memory stick or even a memory card) with a partition formatted so that you can read it on both devices. Windows and Linux partitions are formatted in different ways. While it is likely that Linux can read a Microsoft formatted partition, Microsoft Windows can never read a Linux formatted partition.
If we selected "install" or "upgrade" to follow "apt", we can add a “-y” flag to signify that we want the install to continue. Without this flag, the package manager will ask periodically if we want it to continue, and we have to then respond with a “y” each time. For example, when we ask to install a package, "apt" will do a search, it will list what components it has found, and output how big their demands are on storage, without "-y" flag, it will then ask (at least once) if it is okay to continue to installing.
 
==Where to install all packages?==
=== Name ===
 
For simplicity on this page CHOSEN PATH (the contents of this will start with a slash “/”, but not end with a slash) is used to represent any location in the Linux file structure where you decide to install all the Cumulus packages.
The final part of the package command is the name of the package or component that we want to install/upgrade/purge/show/remove or search for.
 
The phrase “CHOSEN PATH” is used, because it is most likely you want to create the sub-folder called “/CumulusMX” (note where capital letters must be used) in a part of the Linux file structure that already exists.
=Install starts here=
 
It is important to minimise the length of the path name, because this path name has to be passed between various different software languages (and longer paths risk truncation).
If your computer has the pre-installed image, or you have installed MX before, you can skip the sub-sections that follow on here and continue reading at [[#Cumulus packages]].
 
== Preparing for an install==
 
===Creating the CumulusMX sub-folder===
Before we do an install of a new package, we typically use this series of commands to ensure our computer is in the best state to work out dependencies of what we are about to install:
 
:<code>sudo apt update</code>
 
:<code>sudo apt -y full-upgrade</code>
 
:<code>sudo apt autoremove</code>
 
Each of those can be understood from information in [[#install|earlier sub-section]].
 
If you are installing onto a Pi zero, or similar slow computer, please ensure the size of the swapfile is as big as possible, as the mono-complete we will install is large. In linux, we type <code>free -m</code> to see our RAM size and our swapfile size.
 
To change swapfile size on the Raspberry Pi (''Can contributors add details for other Linux computers''):
# Edit a file <code>sudo nano /etc/dphys-swapfile</code>.
# Move the cursor down line by line until it reaches '''CONF_SWAPSIZE=100'''. That is showing that the swapfile is only 99 mb by default in the Raspberry Pi Operating System.
# Now move the cursor to the 100, and change it to "512" which is enough for mono even on a Pi zero.
# Next, stop, and restart, the relevant service using <code>sudo /etc/init.d/dphys-swapfile stop && sudo /etc/init.d/dphys-swapfile start</code>.
# That should complete quickly, and we can type <code>free -m</code> again to see the 99 we saw previously has been replaced by 511.
 
=== USB HID ===
 
There is one more prerequisite package for MX with some weather station types.
 
You may notice [[MX_Basic_info#HidSharp.dll|HidSharp.dll]] in same folder as executable, this is a cross-platform [https://www.nuget.org/packages/HidSharp/ Universal Serial Bus (USB) Human Interface Device (HID) library].
 
To check your USB devices, type <code>sudo lsusb -t</code>.
 
MX uses this library for weather stations (like Fine Offset and USB connected Oregon Scientific models) that appear as a HID via a USB connection. To check if your weather station appears as a HID, download this [https://cumulus.hosiene.co.uk/download/file.php?id=11414 USB HID test package] and run it.
 
 
This HidSharp library calls a package ''libudev shared library'' file called ''libudev.so.1''. Most recent Linux distributions will already include the libudev shared library. On my Raspberry Pi, [[#install|typing]] <code>apt search libudev</code> showed ''libudev.so.1'' was already installed. If it is missing, then [[#install]] it.
 
Optionally, read about [https://cumulus.hosiene.co.uk/viewtopic.php?f=39&t=14310&p=111593&hilit=libudev.so.1#p111593 Oregon Scientific] issues.
 
Optionally, read about [https://cumulus.hosiene.co.uk/viewtopic.php?p=107913#p107913 Fine Offset] issues, and the optional symbolic file link instructions (those apply if you only have an earlier libudev shared library version, and wish MX to use that).
 
== Checking if mono-complete in Source List ==
 
The "source list" [[#The various components to commands for installation|mentioned earlier]] may not contain all the repositories we need for our installations.
 
Consequently, [[#The_various_components_to_commands_for_installation|type]] <code>apt search mono-complete</code>, to find out whether the mono package is available from one of the repositories already in our source list, and if the version available is compatible with MX (Release announcements for MX should specify which versions of Mono will work).
 
If mono-complete is not available (or only available in an older version incompatible with MX), then we have to add a new repository, and the one to add depends on which Linux kernel is used by our Operating System.
 
There are a number of sub-sections below, please check which applies to you, and only read that one.
 
===Add the Mono repository for a Raspberry Pi===
 
The two Mono repositories listed here are specific to the 2017 and 2019 releases (respectively) of the operating system for a Raspberry Pi computer. These are taken from [https://www.mono-project.com/download/stable/#download-lin-raspbian download-lin-raspbian].
 
# the first line (in each case) installs a certificate
# the echo line defines a repository to add to the sources list.
{| class="wikitable"
|-
! scope="col" style="width:450px; color:blue" | Raspberry Operating System 9 (stretch) !! scope="col" style="width:450px; color:navy" | Raspberry Operating System 10 (buster)
|-
| style="height:50px;| <code>sudo apt install apt-transport-https dirmngr gnupg ca-certificates</code> || <code>sudo apt install apt-transport-https dirmngr gnupg ca-certificates</code>
|-
| style="height:100px; | <code>sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF</code> || <code>sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF</code>
|-
| style="height:100px;| <code>echo "deb https://download.mono-project.com/repo/debian stable-raspbianstretch main"</code> || <code>echo "deb https://download.mono-project.com/repo/debian stable-raspbianbuster main"</code>
|-
| style="height:50px;|<code>sudo tee /etc/apt/sources.list.d/mono-official-stable.list</code> || <code>sudo tee /etc/apt/sources.list.d/mono-official-stable.list</code>
|-
| <code>sudo apt update</code> || <code>sudo apt update</code>
|}
 
===Add the Mono repository to Ubuntu, Debian, Fedora===
 
At time of writing, [https://www.mono-project.com/download/stable/#download-lin-ubuntu download-lin-ubuntu], shows the instructions for versions 16, 18, and 20 of Ubuntu.
 
Equally, [https://www.mono-project.com/download/stable/#download-lin-debian download-lin-debian], gives details for debian, and [https://www.mono-project.com/download/stable/#download-lin-fedora download-lin-fedora] for Fedora.
 
Others can be found by choosing other tabs on any of those links.
 
== Installing Mono instruction ==
 
Now we have the certificate needed, and the repository for mono-complete is added to our source list, we can do the actual install:
: <code>sudo apt install -y mono-complete</code>.
 
* The “sudo”, “apt”, “install”, and “-y” have [[#The various components to commands for installation|already been explained]].
* The "mono-complete" is the package we want.
 
:Please note that if you just specify “mono”, you will get ‘’’mono-devel’’’ (the developer edition) that does not include all the components required by each of the Cumulus executables.
 
Please note that a particular MX build might specify it needs a particular version of Mono. Hence, although normally you can upgrade any (CumulusMX.exe, ExportToMySQL.exe, CreateMissing.exe, proposed CreateRecords) cumulus package without upgrading Mono, sometimes you will need to install Mono again.
 
The latest release of Mono can always be downloaded from [https://www.mono-project.com/download/stable/#download-lin] for a variety of Linux distributions:
# follow step 1 there,
# but in step 2 replace ‘’’mono-devel‘’’ by ‘’’mono-complete’’’
 
=Cumulus packages=
 
Note use of plural in section name above, the following sub-sections will install various packages produced by Developer Mark Crossley. If you are using the [[Software#Cumulus_MX|pre-built disc image]], then (unless the MX release version included in your image is an old one) you should skip the instructions for "CumulusMX".
 
==Handling zip files==
 
Each release is presented as a zip.
 
The download and unzip procedure is exactly same on your Linux computer, and on a Windows PC. So if you have two devices available, you can download on either device, and if it is not the computer you want to install on, you can use a file transfer package to move the files between devices, or use a drive (or even a memory card) with a partition formatted so that you can read it on both devices. Windows and Linux partitions are formatted in different ways. While it is likely that Linux can read a Microsoft formatted partition, Microsoft Windows can never read a Linux formatted partition.
 
When your browser saves the zip it might be into a folder called “downloads” on your computer, or you may be able to save into another folder that you prefer (perhaps on a different partition). Your browser might even remember the folder you used before for files of type zip.
 
When the download has completed, whatever computer type this is on, mouse click (it might need a right click or a double click depending on settings) on the download file and it should unzip (it may create a folder whose name is taken from the zip file name in the same folder by default, or it may ask you where you want to unzip to). If you are unable to use a mouse, there should be a keyboard code to use. If you are using a file manager, with a graphical interface, there may be a menu item (or two menu items) to select the file and unzip it.
 
==Where to install all packages?==
 
For simplicity on this page EXISTING PATH (the contents of this will start with a slash “/”, but not end with a slash) is used to represent any location in the Linux file structure where you decide to install all the Cumulus packages.
 
The phrase “EXISTING PATH” is used, because it is most likely you want to create the sub-folder called “/CumulusMX” (note where capital letters must be used) in a part of the Linux file structure that already exists.
 
It is important to minimise the length of the path name, because this path name has to be passed between various different software languages (and longer paths risk truncation).
 
* You can create sub-folder called “/CumulusMX” as you unzip a MX release, or you can type <code>sudo mkdir EXISTINGCHOSEN PATH/CumulusMX</code> first (note that EXISTINGCHOSEN PATH is explained above and always starts with a slash “/”).
* By using the phrase EXISTINGCHOSEN PATH this advice avoids telling you to install Cumulus where you do not want it:
*# Many people with a Raspberry Pi, and a little technical understanding, add an external drive to reduce wear on the internal micro-SD card, and keep their Cumulus files away from the drive that holds the operating system.
*#* This page is not going to get technical by telling you how to create, or mount, Linux partitions on your external drive. If your drive was bought from a Raspberry Pi reseller, they might help you.
*# Other people using a Raspberry Pi without that technical expertise, might use ‘’’/home/pi’’’ for EXISTINGCHOSEN PATH as that is the default folder for the default user (Pi) and can be referenced as "~" in file path instructions they issue (although Cumulus will not understand that shorthand)
*#* Within that ‘’’/home/pi’’’ folder, the default user has full permissions automatically.
*# The developer suggests you use ‘’’/opt’’’ for EXISTINGCHOSEN PATH (which should be available on any Linux computer).
*#* By default, the code Mark provides for installing Cumulus as a service, will run that service as a root user, and the root user has full permissions in /opt (and everywhere else)
*#* (Novices: Skip this step) If you do choose a EXISTINGCHOSEN PATH outside your home folder, youthen mighta wantmore totechnical user can change the ownership of the "CumulusMX" sub-folder, to the default user (Pi), if so, typewith <code>sudo chown -R pi: EXISTINGCHOSEN PATH/CumulusMX</code>., and Thereduce advantagesthe ofneed thatto command is you no longer needuse "sudo" toon accessmany theactions. files (however, if you are running MX as a service, you also need to edit the user in the script provided to create the service, so MX does not create files with root ownership - this will be covered later)
 
==Packages to install==
# '''CumulusMX''':
#* '''CumulusMX.exe''' is written in C#, that has been developed by Mark Crossley, but still contains some code by Steve Loft
#* Download '''CumulusMX zip file’’’ from the link at [[Software#Latest_build_distribution_download]]
# [[Software#Create_Missing|'''Create Missing''']]:
#* '''CreateMissing.exe''' is also written in C#, created, and developed, by Mark Crossley
#* '''ExportToMySQL.exe''' is not (at the time this was written) documented in this Wiki although [[MX_Administrative_Interface#MySQL_settings]] does describe a similar utility (written by Steve Loft) that was actually included within early CumulusMX zip downloads.
 
As at 9 March 2020, another utility, '''CreateRecord''', has been initialised in the Github areas managed by the developer where Cumulus is worked on, although it appears to be just a concept (any code on the developer's computer has not yet been included) on github. This will, if my understanding is correct, read [[dayfile.txt]] and use that to update the various [[:Category:Ini Files|extreme record files]]. The developer is still aiming to make this available, but his work on it (on his computer) has been stalled by the level of pressure being applied for bug-fixes and changes to MX itself.
 
===Alternative download link for older MXpackage releases===
 
Because the developer uses Git Hub to manage releases, the older releases remain available.
Skip this sub-section if either you have installed the "pre-built disc image", or the current MX release is stable (it has been available for a while and nobody has reported any bugs).
 
====Old Cumulus MX packages====
Skip this subsection if either you have installed the "pre-built disc image", or the current MX release is stable (it has been available for a while and nobody has reported any bugs).
 
Check if posts in the [https://cumulus.hosiene.co.uk/viewforum.php?f=40 Cumulus Support Forum] tell you that the current release of MX has one or more bug(s) that affects one or more aspect(s) of MX that you intend to use.
* Plus a whole host of optional features, and different external upload sites, (typically each of these optional features are only used by a sub-set of Cumulus users).
 
Anyway, '''you can download any earlier MX build, without the bug''', from [https://github.com/cumulusmx/CumulusMX/releases CumulusMX/releases].
 
====Old utilities====
You need to ensure that you use the right version of "CreateMissing.exe" and "ExportToMySQL.exe" utilities for the MX release you are running, so if you are using an old MX release, you will need to go directly to the [https://github.com/cumulusmx Cumulus MX github] page, and navigate to the utility of interest, to download an older version of these utilities that matches your older MX.
 
The zips for "CreateMissing.exe" and "ExportToMySQL.exe" utilities do NOT contain the '''''.dll''''' components that they need when they are running.
 
This means that each version of "CreateMissing.exe" and "ExportToMySQL.exe" utilities is dependent on it being used with a release of Cumulus MX that does have correct '''''.dll''''' components in its release distribution.
 
That in turn means you can't use the latest version of the utility with older MX releases, nor can you use an old utility version with latest MX release. This is why [[Software#By_Mark_Crossley|utilities downloads]] make clear which MX release is the minimum for them.
 
The older versions of these "CreateMissing.exe" and "ExportToMySQL.exe" utilities are available by going directly to the [https://github.com/cumulusmx Cumulus MX github] page, and navigating to the utility of interest. However, to use those older versions, you also need to download the corresponding older MX release, because the MX distributions contain the .dll files that the utilities require, they are not in the utilities zip. Because of this complication, novice users are advised not to attempt to use the older utilities, even if the latest version appears to have a bug. Technical users may be able to work out which .dll files are needed and can be safely added back (if they are not left over from when that past MX release was in use). An alternative is to create a new folder with the old release packages (MX and the utility of interest), a copy of the latest Cumulus.ini file, and a copy of all files from /data sub-folder; then afterwards copy back the changed files into original /data folder.
 
==Upgrading a Cumulus package==
 
Always check the release announcements in [https://cumulus.hosiene.co.uk/viewtopic.php?f=40&t=17887 Cumulus MX announcements] for any action needed in planned upgrade. In brief, all files from new release distribution replace the files from previous release, and the download/unzip is as covered above.
Upgrading to a new MX release is explained [[Updating_MX_to_new_version|here]], but basically follow instructions above, and install over your existing files. The alternative is to install in a new folder (or rename the old one), and copy across files not in the release from old location to new location.
 
No further action needed for upgrade of "Create Missing" or "Export To My SQL" or "Create Records". See below for upgrade of main Cumulus MX package.
 
If you are running an older MX release, before skipping in-between versions please check [[Updating_MX_to_new_version|here]].
 
If you run MX as a service, then:
# Ensure you are not doing any changes to settings
# Leave MX running as you copy files from the new release distribution over the existing files
# Try to pick a time just after MX has done any standard interval store of readings or upload, so that it is least busy
# Use <code>sudo systemctl restart cumulusmx</code> to stop and then restart MX picking up the new files
# Result, downtime of MX kept to a minimum, so avoiding losing data
 
If you run MX interactively, do the unzip into a temporary location before you stop MX, then copy all files from temporary location over your existing files, and finally restart MX. Depending on your weather station type, it might or might not offer historic data catch-up, so you might lose some data while MX is stopped, and therefore should keep the downtime to a minimum.
== Report and data files to copy across from any previous Cumulus location ==
 
The alternative is to install in a new folder (or rename the old one), and copy across files not in the release from old location to new location, but in that alternative you might forget some files.
All the (optional) files in the [[Reports folder]] can be copied across from a previous installation. If your previous installation was not on Linux, see [[#Line terminators in .txt files]]
 
==Changing location of Cumulus MX==
All the files in the [[data folder]] can also be copied across, but be aware your new installation has to use the same "locale" as the old installation, or MX will struggle as the locale affects how new lines are stored, and how MX expects old lines to have been stored. Microsoft Windows uses different line terminators, see [[#Line terminators in .txt files]], although MX should cope, any third party routines reading your data files will probably not accept a line terminator change.
 
If your install, or upgrade, is creating MX in a different place to where you previously ran Cumulus, then you will want to copy files across that are not in the zip extract distribution.
If your previous Cumulus installation was of the legacy software, version 1.9.4, or earlier, then you need to do a lot of reading:
* [[Amending dayfile]] tells you about how MX is far more fussy about the content in [[dayfile.txt]]
* [[:Category:Ini Files|.ini files]] explains how time-stamps are formatted differently in the extreme tracking files
* [[Migrating from Cumulus 1 to MX]] gives some advice about differences in settings, but be aware that the way MX handles settings varies by release, and information on the linked page may be out of date
 
===Configuration Files to copy across from any previous Cumulus installation===
 
There are two configuration files that are not included in any MX release:
*[[strings.ini]] (note all lower case) – optional file to customise output
*[[Cumulus.ini]] (note initial capital, then lower case) – main configuration file
 
Here, it must be stressed that having either or both of these files in an existing Cumulus installation does not imply such file or files can be understood by the new MX release you have just installed.
 
Just copy the existing files from old to new installation, if
# Your locale is still the same
# All files on your new install are in same paths as on your old install (some settings involve specifying paths)
# Your old installation has a relatively recent MX release (compare the "y" in 3.y.z,between old and new installation, a difference of more than 1 in that middle figure means you do not have a recent release)
# Your old installation was on a LinuxUnix-based computer (not a computer running Microsoft Windows Operating System)
 
Please see the table below for more advice, but the problem is that content of both files has changed as MX has been developed, so some content is no longer understood, and some new content has been added.
 
Some of the differences between versions of '''Cumulus.ini''' file can be seen by comparing the different pages in this Wiki documenting this file: [[Cumulus.ini (Beta)]], [[Cumulus.ini (Cumulus 1)]], [[Cumulus.ini (MX 3.0.0 to 3.7.0)]], [[Cumulus.ini (preserving history)]], and [[Cumulus.ini]], but even that does not tell the whole story. MX release 3.12.0 needs to be installed if your old Cumulus was earlier than that, because it is the only release with code to rename the old "Cumulus.ini" and create a new file containing the new set of settings, and new names for some old settings, but without any old settings that are no longer recognised. Please see [[Updating MX to new version]] page for more information about the need to step slowly through from old releases to the newest.
 
 
The sections that appear in '''samplestring.ini''', and the parameters that appear within a section, depend upon which release you are using. So be cautious if you try to reuse a "strings.ini" file originally created by the legacy software, you may find you need to specify your customisation using different parameters in the latest "samplestring.ini".
|-
| The content of "Cumulus.ini" is changing as MX is developed, the [https://cumulus.hosiene.co.uk/viewtopic.php?f=40&t=17887 Release Announcements] normally list any new parameters as they appear in the file, without always mentioning those that have become redundant. The announcements tend to avoid any detail, so you have to guess ''from the attribute'' what values it might take, and generally have no idea of where in the settings pages to make any change.
 
To remove any parameters no longer used in this file, see [[Cumulus.ini#How_to_Remove_Redundant_parameters_from_file|remove redundant parameters]]
 
If your old file contains any [[Cumulus.ini (Cumulus 1)|legacy read-only]] parameters not yet converted into advanced settings, or any [[Cumulus.ini (MX 3.0.0 to 3.7.0)|MX read-only parameters not yet converted into advanced settings]], you may need to manually add such missing parameters back into new file by stopping MX (after finishing all the settings you can configure in the interface), doing an external file edit, and then restarting MX.
| The content of "samplestring.ini" is changing as MX is developed:
* Therefore, your existing “strings.ini” might need to be modified.
If you previously used an older release of Cumulus, but in this new installation will be using the latest release (latest is what is normally best, unless it has bugs), you may want to read up on all the changes between your old release and the current release, not just changes that affect the configuration file.
 
If you have used Cumulus 1 before, and decide to start with a new "Cumulus.ini" file, then you will need to work through all settings, to ensure they are set as you want. Please remember that when you use MX for first time, it uses that date it was first run as a starting date, and ignores any data found with earlier dates. Therefore you must change that start date:
==Moving from Microsoft Windows to Linux==
'''MX interface''' --> Setting menu --> '''Station Settings''' --> Click on ''General Settings'' --> Click on '''Advanced Options''' --> Edit ''Records Began Date'' following instructions below that field
 
==="data" directory===
===Line terminators in .txt files===
 
Please see [[:Category:Files_with_Comma_Separated_Values]], [[:Category:Ini_Files]], and [[Weather_Diary]], for information if you are moving from Cumulus 1 to MX. Otherwise just copy files from any existing folder to your new one.
If you are a novice to computers, skip this sub-section and the next, go directly to [[#File Names & Paths]].
 
You may also wish to read:
You need to have some technical understanding to do an action that might encounter the issues discussed here. For normal MX usage, line terminators do not matter.
** [[Amending dayfile]] tells you about how MX is far more fussy about the content in [[dayfile.txt]]
** [[:Category:Ini Files|.ini files]] explains how time-stamps are formatted differently in the extreme tracking files
** [[Migrating from Cumulus 1 to MX]] gives some advice about differences in settings, but be aware that the way MX handles settings varies by release, and information on the linked page may be out of date
 
Complications occur if the locale used by '''Mono''' or the locale specified when starting MX using [[#-lang parameter for changing Locale|-lang parameter]] differs from the locale for your previous device (please see [[:Category:Files with Comma Separated Values]] because some locales separate fields with commas, some separate integer and decimal parts of real numbers with commas; not to mention all sorts of issues with how dates are formatted). The main MX developer proposed that the format of files with comma separated values will be fixed from a release planned for September 2020, so all dates will use one standard format, all numbers will use decimal points, and the field separating character will be fixed.
If you are moving from Microsoft Windows to Linux, be aware that Microsoft ends each line with two characters (Carriage Return and Line Feed) while Unix/Linux ends each line with a single character (Line Feed). Cumulus can cope with both approaches for existing files, but will create new files correctly for Linux.
 
Update May 2022, this has been put on hold, no public MX release has this restriction yet.
If you run your Linux computer in a headless mode, accessing its files by a remote terminal session, be aware that the line terminator used by the remote computer may be applied to files affected by whatever command you do remotely. Equally, running a Cumulus executable (MX or one of the utilities) may create new files with the wrong end of line terminator. The latest releases have been amended to match existing files, when they create a new file to replace an old file (or because that file is missing/corrupted).
 
If you try to edit a file outside MX, the tool you choose to use might be able to detect that it is getting Microsoft files, and discard the extra end of line character.
 
==="Reports" directory===
However, if you are reading a comma separated value file (such as MX uses for various files) in a script, your script might not detect the end of line encoding:
* If the script expects the Linus LF, and finds CR LF, then the final field of each CSV line has an invalid character in it, so your script will not be able to understand that field as a numerical value (or time-stamp).
* If the script expects CR only, and finds CR LF, then the first field of the each line presented to the script (except the first line) starts with a “LF” and the script will not recognise it as a date.
* If the script expects CR only, but just finds LF, the script will believe the whole file is just one line, and the fields before and after the LF will be treated as a single field so your script will not be able to understand that field as a numerical value (or time-stamp).
* If the script was written for a Microsoft Windows environment, it will expect CR LF, but might be confused if the end of line is different
 
By default MX now creates monthly and annual reports that are in the style used by NOAA in USA. If you have been using this functionality before (and it is optional) then you need to file transfer, or copy, all the files that were in the old [[Reports folder]] into the new folder of that name. Do look at that cross-reference, and read about the encoding default differences between Cumulus 1 and MX.
 
=MX can cause problems with storage=
===Changing line terminators===
 
MX now assumes by default that you are going to use its [[New Default Web Site Information|Default Web Site]]. That means that by default MX will re-generate temporary files in its [[Web folder|/web sub-folder]] on a frequent time-scale. That number of files writes will considerably shorten the working life-time of the "high capacity micro-SD" card that is the default storage for the Raspberry Pi. It will also considerably shorten the life of any flash memory (e.g. memory card) that you might install MX on.
Many editors designed for programmers (they might be described as providing a programming development environment) can change the line ending of every line (either while file is being edited or when file is saved).
 
The expected life of any storage device, and the extent to which its life is shortened depends on the actual device. The external devices that have the longest life (and therefore can cope most easily with multiple read/write actions) are solid state discs (SSD). Also the larger the capacity of the storage device, the more places on the device where files can be stored and the storing algorithm will try to spread the storing evenly across the entire storage area, so wear at any one location is reduced.
‘’’Geany’’’ is a programming development editor provided on some Linux systems including Raspberry Pi, that can do this ('''Document''' menu, -->> '''Select Line Endings''').
 
All Linux computers will have some random access memory chips (RAM) and it is worthwhile to define part of that RAM as a drive used for temporary files. For a Raspberry Pi computer, a typical approach would be to edit the fstab file, adding the line ''tmpfs /run/tmp tmpfs nodev,nosuid,size=1M 0 0'', but the size you choose will depend on RAM available and what temporary files are being created. For maximum life of the "high capacity micro-SD" card if that is what your computer boots from, you should create a symbolic link path that maps the '''/tmp''' folder used by the system to your '''/run/tmp''' you have just defined in RAM. The difficulty will be that you cannot create a logical redirect on '''/tmp''' if the folder is already in use, so that makes it too complicated to explain here.
Notepad++ is another editor available for multiple operating systems ('''Edit''' menu -->> '''EOL conversion''').
 
==web directory==
Both have capabilities to make such changes on either the single file that has focus, or all loaded files.
 
All the files in this folder come from the download.
 
However, when you are running MX, it may try to create temporary files here, and following the advice above, you may decide to set up symbolic links so any attempt to create a temporary file in the "web" folder is redirected to the temporary folder you set up in RAM.
===File Names & Paths===
 
The links you need depend on which options you select in settings, you might find it easier to wait until you have run MX for a while to see what files are created that end in ".json".
Another issue that may be encountered when moving from Windows to Linux is the difference in File Names & Paths.
Linux file names are Case Sensitive, and the separator is "/" Vs "\".
 
If MX is currently running, you need to stop it, or at least alter any options that generate .json files. Then you must delete those files that end in ".json", except that you don't delete "websitedataT.json".
This could be applicable if you are using Extra Web files.
 
In a terminal session, issue commands in the following format for each file (this example relates to Raspberry Pi and uses "/var/tmp" which was defined in the extra line added to fstab earlier):
Here is an example changing the case and the separators: ''Web\extrapageT.htm'' in Windows, changed to read '''web/extrapageT.htm''' in Linux.
 
<code>sudo ln -s /run/tmp/websitedata.json CHOSEN PATH/CumulusMX/web/websitedata.json</code>
=Running MX on Linux=
 
Notes:
This section explores the optional parameters, and then covers 2 ways to run MX:
* The "-s" flag is what says you are creating a symbolic link
# as a service and
* Full paths are given both for the file that MX is to be redirected to, and after it the path where it expects to create the file
# interactively with terminal window left open.
* "CHOSEN PATH" is defined in [[#Where to install all packages?]], but basically it starts with a "/" and defines the path to get to where "CumulusMX" is a sub-folder.
* The text "websitedata.json" is just one file in the set of files linked from [[:Category:JSON Files]].
 
=Running MX=
== Optional parameters to add to the instruction to run the MX engine ==
 
There are multiple subsections here, you are unlikely to need to read them all. Look at each, and decide if it applies to you.
This list of parameters covers every parameter, if you are using the latest release skip the historic 3.0.0 sub-sections.
 
== Parameters ==
IMPORTANT: The "sudo" prefix shown in code examples for the various parameters can be omitted if the user that is running MX owns the folder "CumulusMX" and all its contents. In the [[#Where to install all packages?|installation notes earlier]] possible locations and ownership issues were mentioned. That earlier section also defined EXISTING PATH, if that is not mentioned in the code examples, it is assumed you have already issued a <code>cd EXISTING PATH</code> to be in the right folder for issuing the command.
 
CumulusMX.exe can take a number of optional parameters as summarised here:
Note that you ''may'' need to supply your root password after typing any 'sudo ...' command line if the instruction changes something set by another package (e.g. changing the locale for MX from the locale set by mono). The system will prompt you for this if it is needed.
{| class="wikitable" border="1"
!style="width:30px" | Parameter
!style="width:600px" | Description
|-
! scope="row" | -port nnnn
| This parameter can be used whether MX is running interactively or as a service. Used to change the port where the web server for the MX interface runs, when Cumulus starts, it will display the URL of the interface where you change the settings, this is port 8998 by default. To use it when running MX in interactive mode, type <code>sudo mono CumulusMX.exe -port 9999</code> and the interface will run at port 9999 instead.
|-
! scope="row" | -service
| This parameter is not available when running interactively. It is used in a service definition file, please see [[#Running MX as a Linux "systemd" service]] for all details
|-
! scope="row" | -lang {locale}
| This parameter can be used whether MX is running interactively or as a service. Used to change the locale that MX will use from the default on your computer. To use it when running MX in interactive mode, type <code>sudo mono CumulusMX.exe -lang en_GB</code. There is a list of locale codes at http://msdn.microsoft.com/en-gb/library/ee825488%28v=cs.20%29.aspx. Remember this changes whether MX uses decimal comma or decimal point (although the intention is that all Cumulus files will use decimal points, this will still affect the output from api calls, web tags, etc.) and how it names files that include letetrs representing a month abbreviation.
|-
! scope="row" | -debug
| This parameter can be used whether MX is running interactively or as a service. This is only available for [https://cumulus.hosiene.co.uk/viewtopic.php?p=138839#p138839 release 3.4.4 - Build 3068] onwards. This switches on debug and (from 3.1.0) data logging from the start-up of Cumulus MX. Please note this increases size of files created in [[MXdiags_folder]]. As an alternative to using this parameter, you can switch debug and data logging on and off within the MX interface settings, see the aforementioned link for instructions.
|-
! scope="row" | -wsport
| Applied to MX beta 3.0.0, no longer available, set the port for web sockets, now incorporated into the -port parameter.
|-
! scope="row" | -logging
| Applied to MX beta 3.0.0, no longer available, enabled just data logging, now incorporated into the -debug parameter
|}
 
=== -port parameter for changing Port ===
 
When Cumulus starts, it will display the URL of the user interface. It runs on port 8998 by default; if this is not suitable for some reason you can over-ride it using the '-port' parameter on the command line, e.g. to use port 9999 instead:
<pre>sudo mono CumulusMX.exe -port 9999</pre>
 
==Your first run of MX on Linux==
=== -lang parameter for changing Locale ===
 
Once you have got all the files sorted out as described above, you need to run MX.
On Linux and (in particular) OS X, Cumulus MX may not be given the correct locale to use, and you may get the default US locale even if that is not your locale. It will output the local it is using when it starts; if it is not correct, close it down and start it again, this time specifying your locale on the command line, using the -lang parameter . For example, in the UK, on a non-Windows device type:
:<code>sudo mono CumulusMX.exe -lang en-GB</code>
 
On the first run of MX, unless you have run a recent release before, you need to work through either the [[First_Run_of_MX|'''Config wizard''']] or all the individual settings pages (or both) as accessed from "Settings" menu. It is suggested you run MX interactively (see below) to do this, as you will then need to close MX, and then start it up again.
Other locale examples: '''CumulusMX.exe Current culture: English (United States)''', '''CumulusMX.exe -lang de-DE''', '''CumulusMX.exe -lang el-GR''' (this is one of the locales that reads numbers with '''integer,decimal''' format), '''CumulusMX.exe -lang nl-NL'''.
 
Information about settings is on other Wiki pages ([[MX Administrative Interface]] and [[Cumulus.ini]]).
If you are not sure what value you need to supply for the -lang parameter, there is a list here - http://msdn.microsoft.com/en-gb/library/ee825488%28v=cs.20%29.aspx. You need to supply the code in the first column ("Language Culture Name") in that list.
 
== Run interactive or as a service==
Note that this does not affect the language used by Cumulus MX (although it may in the future), it affects the decimal separator and the list separator.
 
MX can be run in two different ways.
=== Installing/Configuring the MX service and the -service parameter===
 
It is advised that you run MX interactively to begin with, and only run it as a service when you are happy that all settings are correct, and that any uploading or other external tasks are working correctly.
Parameter for running as service a used within file for installing/configuring the service ===
 
Running interactively allows MX to display error messages to you, and to confirm when it is running normally. Just in case it is not obvious .... if you start any executable interactively in a terminal window on your Pi, you must leave that session running, or that executable will stop running
The parameter syntax is <code>sudo mono CumulusMX.exe -service</code>
 
If you run MX as a service you do not get any direct feedback, and cannot see if there has been a problem or failure. Running as a "systemd" service was first made available at Patch release 3.8.4 - b3094 (14 September 2020).
You don't use this parameter in a terminal or interactive instruction for running MX. Instead it appears within a file that we use to set up for running MX as a service.
For the latest release, (see [https://cumulus.hosiene.co.uk/viewtopic.php?p=146473#p146473 this later release announcement]:
#There is a task to do just once to configure the service
#Find the '''EXISTING PATH/CumulusMX/MXutils/linux/''' sub-folder, that might be in home directory and therefore found using "~/CumulusMX/MXutils/linux" as explained elsewhere on this page
#* At time of typing this, the sub-folder only contains one file, the one we need to edit
# As described later there is a choice of editors, but you can use <code>sudo nano cumulusmx.service</code> to edit the service configuration file
# Within the provided file you should find a [Service] section:
<pre>[Service]
User=root
Group=root
ExecStart=/usr/bin/mono-service -d:/home/install/CumulusMX CumulusMX.exe -service
Type=forking
ExecStopPost=/bin/rm /tmp/CumulusMX.exe.lock</pre>
 
==Running MX interactively==
There are some edits needed to that section:
# Replace '''User=root''' if you want the service to run as a different user
# Edit the line that begins with '''ExecStart='''
#* The mandatory change is to replace '''/home/install''' by what you have selected for EXISTING PATH
#* An optional change is to add additional parameters after the '''-service''' (select from '''-debug''', -locale, -port) as described in sub-sections above
#save file with a new name '''cumulusmx_mine.service''' (using a new name stops it being overwritten when we upgrade MX
#now copy file to where it is needed to run the service:
:<code>sudo cp EXISTING_PATH/CumulusMX/MXutils/linux/cumulusmx_mine.service /etc/systemd/system/cumulusmx.service</code>
 
To run MX interactively, you must open a terminal window, and leave it open until after you have closed MX.
Here is how the file might look after the changes:
<pre>[Unit]
Description=CumulusMX service
Documentation=https://cumuluswiki.org/a/Main_Page
After=network-online.target
 
The simplest instruction to run Cumulus MX is <code>cd CHOSEN PATH/CumulusMX && sudo mono CumulusMX.exe [optional parameters]</code>.
[Service]
* This is two commands issued together, the first changes the working folder, the "&&" means that first command has to succeed before the second command is obeyed and actually starts the main executable
User=pi
* This example has not included any optional parameters, as they are rarely needed, but the optional parameters available are as listed in table earlier.
Group=pi
ExecStart=/usr/bin/mono-service -d:/opt/CumulusMX CumulusMX.exe -service -debug
Type=forking
ExecStopPost=/bin/rm /tmp/CumulusMX.exe.lock
 
When you want MX to stop, you must (for Linux) within your terminal session hold down the "Ctrl" button on your keyboard, and press "c". A word of caution here, if you are accessing your Linux computer over a network from another computer, do be careful about using any control sequences, as it is possible that your "Ctrl" "C" sequence will be applied to an application other than Cumulus MX, if that terminal session has started more than one application. The issue is that all running applications use the same terminator, it should be applied to whatever is regarded as the "foreground" application at the moment the control key sequence is used, which is guaranteed to be MX if that terminal session has only been used for running MX, and MX has not launched any external applications. After that you can choose to close the terminal window.
[Install]
WantedBy=multi-user.target</pre>
 
===Interactive advice===
====Setting up as a service in release 3.8.0 ====
 
If you have followed advice at [[#Where to install all packages?]], the user you are using will own the "CHOSEN PATH/CumulusMX" folder and you ''may'' be able to omit the "sudo" befor the "mono". I say "may" because there are other reasons why you may need to run as root user, too technical to explain here.
Skip this sub-section for latest release.
 
For historic reasons, note the original instructions in the 3.8.0 [https://cumulus.hosiene.co.uk/viewtopic.php?p=145048#p145048 release announcement]:
# Ensure you are in the folder containing CumulusMX.exe
# Type <code> mono-service -l:/var/run/cmx.pid CumulusMX.exe -service</code>
# (to verify) note this does not allow you to add -port, -debug, -locale parameters
 
=== -debug parameter for adding debugging ===
 
MX has a default level of logging that stores in the [[MXdiags_folder]] folder a log file that shows some of the interaction with the weather station and some of the output actions done as MX runs. A new log is started each time MX is restarted.
 
If there is a problem, then there is a great benefit in actually increasing the level of detail in these logs; and that is done either within the settings (on recent MX releases this is on '''Program Settings''' page of admin interface - please see [[MXdiags_folder]] page for details) or by adding a parameter:
:<code>sudo mono CumulusMX.exe -debug</code>
 
=== Parameters only applicable to Version 3.0.0 Beta builds of MX ===
 
The following two parameters cannot be used with MX since it came out of 3.0.0 beta.
 
==== -wsport parameter for web sockets ====
 
Beta builds in MX version 3.0.0 had an optional parameter <code>sudo mono EXISTING PATH/CumulusMX/CumulusMX.exe -wsport nnnn</code> that determined which port (represented by a 4 digit number ''nnnn'') was used for '''Web Sockets'''.
 
That parameter [https://cumulus.hosiene.co.uk/viewtopic.php?f=40&t=17887&p=138815&hilit=sockets#p138815 is now deprecated as Web Sockets in all builds since 3045] use the same port for web sockets as for the HTTP port of the [[MX_Administrative_Interface#The_API_interface|Admin Interface]], see -port parameter described earlier.
 
==== -logging parameter for debugging of data flow between station and MX====
 
Use '''sudo mono CumulusMX.exe -Logging=1''' (for the station to MX transfers to have increased debugging logging).
 
Note use of this parameter is now deprecated.
 
Although this is not mentioned in any release announcements, it appears that on all recent MX releases this effect is incorporated into the '''-debug''' parameter described earlier. Perhaps someone could confirm whether this is true.
 
==Running as a service==
 
The instructions to set up the ability to run MX as a service [[#Parameter for running as service| were given earlier]]. If you want MX to automatically start when your Linux computer is booted, just type <code>sudo systemctl enable cumulusmx</code> once, and it will be activated on each reboot.
 
The full set of commands to use with this service are at [[Raspberry_Pi_Image#systemctl_commands|systemctl_commands]],they are not duplicated here, so there is only one place to do any update.
 
In the [[#Parameter for running as service|earlier instructions]] it was suggested you change the user for the service, if you have done that you can omit the "sudo" in <code>sudo systemctl start cumulusmx</code> which manually restarts the service. Equally, you can omit "sudo" from any command that accesses Cumulus files created by the service.
 
 
== Running any MX executable with a terminal session left open ==
 
This is alternative to the running as service as described above.
 
The simplest instruction to run Cumulus MX is <code>cd EXISTING PATH/CumulusMX && sudo mono CumulusMX.exe</code>.
* This is two commands issued together, the first changes the working folder, the second actually starts the main executable
** To run "Create Missing" or '''ExportToMySQL''', just edit what appears after "mono" to the correct executable name
* If you have followed advice at [[#Where to install all packages?]], the user you are using will own the "EXISTING PATH/CumulusMX" folder and you can omit the "sudo".
* You can add parameters after "CumulusMX.exe" (select from '''-debug''', -locale, -port) as described in sub-sections above
 
Just in case it is not obvious .... if you start any executable using this command in a terminal window on your Pi, you must leave that session running, or that executable will stop running.
 
You can start it off directly on your Pi, and then
*Just ensure you leave Pi on (with that window minimised) so that terminal session continues running.
 
===Running MX interactively from a remote computer===
Use <code>'''ps -ef | grep -i cumulus | grep -v grep'''</code> to see if Cumulus is running or not.
 
This is similar to running a terminal session on the machine that you installed MX on. If your remote computer is running Microsoft Windows, then the option to run a terminal session, may be called "terminal", "powershell window", "command window", or you might install software such as "PuTTY" to provide the teminal (TTY is the abbreviation for "teletype", a device that was commonly used to access computers in the 1970s and early 1980s).
= Operating a web site with uploads from MX engine =
 
These won't be explained any further here, but be aware that control key sequences may not work, and you may need to type "exit" to close the session.
== The standard web pages ==
 
Use <code>'''ps -ef | grep -i cumulus | grep -v grep'''</code> to see if Cumulus is running or not.
=== From release 3.10.1 ===
 
== Running another executable with a terminal session left open ==
The web pages are a one-off upload from '''CumulusMX/webfiles'''. The data to be shown on these web pages are uploaded from [[:Category:JSON_Files|.json]] files in the [[web_folder]].
 
Open a terminal window, then navigate to the folder where you have installed the 3 Cumulus executables:
Please read [[New_Default_Web_Site_Information|this page]] for more information about styling options and other details.
 
To run "Create Missing utility" type <code>cd CHOSEN PATH/CumulusMX && sudo mono CreateMissing.exe</code>. It does not take any parameters, so that is all you need to know, although it is fully documented at [[Calculate_Missing_Values#CreateMissing.exe]] in this Wiki.
=== Until release 3.9.7 ===
 
To run [[Software#Export_To_MySQL|Export To My SQL]], you change the name of the executable above and add the necessary parameters, follow that link for more details.
The styling and library files were a one-off upload from '''CumulusMX/webfiles'''. These release use [[Cumulus_template_file|template files]], these are [[Customised_templates#What_is_meant_by_.27Cumulus_processes_templates.27|processed by MX to add the variable data]], and this will create web pages that are uploaded to your web site.
 
Please read [[Customised_templates]] for further information about the various pages originally provided, and how you could customise them to suit you.
=== Comparison with legacy Cumulus 1 web pages ===
 
==Running MX as a Linux "systemd" service==
* Note that any web files, designed for Cumulus 1, cannot be used with MX, for multiple reasons
** so if moving from Cumulus 1 to MX, delete all your Cumulus 1 files from the "web" and "webfiles" sub-folders, and all files from your web server; then upload files from the new "webfiles" folder.
* The standard gauges are rather like the stand alone [[SteelSeries Gauges|SteelSeries gauges]] you could optionally add to Cumulus 1, but the MX ones are different.
** The new default gauges page does not display a graph when you hover over a gauge (Cumulus 1 generated some images that the stand alone Steel Series gauges page could use)
* The various charts pages for MX rely on MX to generate files with time and value pairs, these are stored in json format, the various web pages use a library package (Highstocks) to draw graphs from those data pairs.
** (The Trends page provided as standard in Cumulus 1 simply displayed images of graphs uploaded to the web server)
 
There is a one-off task to define a service file, after that you can simply issue commands to stop/start/restart the service.
== Alternative ways to obtain web pages ==
 
For more information, see [https://cumulus.hosiene.co.uk/viewtopic.php?p=146473#p146473 original release announcement].
You can choose to use some of the alternative web pages available from third parties and described [[:Category:User Contributions|on User Contributions page]].
 
===The Service definition file===
== Using your own web pages ==
 
The MX download includes a file that can be used as a starting point for the service definition. Find this file at ''CHOSEN PATH/CumulusMX/MXutils/linux/cumulusmx.service''. You do have to edit this file, and then you have to copy it to a new location, before you start the MX service for the first time.
* Of course you can use your own web pages, instead of the standard ones. Assuming they need to include figures that are available as web tags, there are three alternative ways to implement this:
*# MX can process template files with a HTML structure and those web tags in the structure where values are required just as it does with the standard templates, and MX can upload the resulting web pages at either the real-time interval, the standard interval, or after end of day. All of this is covered on the [[Customised_templates|Customised templates]] page in this Wiki.
*# MX can process a file with a string of web tags mirroring the realtime.txt option in MX, and upload the resulting file so your web pages can use JavaScript for a one-off insert of the values or an Ajax routine to update the web page at a fixed interval.
*# Alternatively, you can use template scripts processed locally by MX that don't create web pages, but are uploaded by MX at either the real-time interval, the standard interval, or after end of day. These scripts simply initialise script variables with values obtained from web tags. You then independently have a set of web pages resident only on your web server (they don't exist where you run MX) using a combination of HTML and script content that bring in the script(s) with the variables by the appropriate syntax. All of this is covered on the [[Php_webtags|PHP web tags]] page in this wiki. As it suggests there, you might therefore have several files processed by Cumulus MX at these different intervals, converting the web tags into script variables, and then use AJAX (JavaScript that may use json format to bring in the variables) or PHP (using <tt>'require_once 'filename';</tt> syntax) to put those variables into a web page.
 
# Open the file at ''CHOSEN PATH/CumulusMX/MXutils/linux/cumulusmx.service'' using an editor (see [[Preparing_your_Linux_computer_for_MX#editing_files|editing_files]]).
You may find [[PHP|this wiki page]] useful for understanding more about the different script languages.
#* On a Raspberry Pi with a graphical interface, use the file manager to navigate to this file, right click the file named, and select "Geany's Programmers Editor".
 
#* If you are accessing from another computer, using a terminal session, then "nano" is a suitable editor (explained at link just mentioned).
=That is enough folks=
# Within the provided file you should find a [Service] section:
 
<pre>[Service]
If you have read up to here, you now know the basics for using MX on Linux.
User=root
 
Group=root
The remaining sections are more technical and so you can skip them.
ExecStart=/usr/bin/mono-service -d:/home/install/CumulusMX CumulusMX.exe -service
 
Type=forking
=Technical Extra=
ExecStopPost=/bin/rm -f /tmp/CumulusMX.exe.lock</pre>
 
PLEASE SKIP ALL SUBSEQUENT SUB-SECTIONS IF YOU WANT TO AVOID TECHNICAL EXPLANATIONS.
 
== A very quick introduction to Linux ==
 
This article is not the place to teach you Linux, you can find books and on-line articles for yourself, but I list here enough for you to understand the instructions used elsewhere in this article.
 
If you have a Raspberry Pi with a monitor attached, you will see a raspberry icon that you can click to get Graphical User Interface access to many features, including shutdown options.
 
=== su and sudo ===
 
There is a command <code>su</code> that allows a terminal session to become a super user session with root privileges. If you use that command, without a '''sudo''' command in front, you need to type in the password (we changed earlier) when prompted. if you type <code>sudo su</code>, then you get root privileges without being asked to quote password. All subsequent lines in this terminal session will have a prompt that reminds you that you have root access and do not need to prefix subsequent commands with "sudo".
 
Normally, all terminal sessions will use the default "pi" user, and for individual commands, you will use a "sudo" prefix each time that command needs administrative rights, as this allows a standard Pi user to do tasks that otherwise only work for the root user.
 
You might use a "sudo" prefix if you need to access a part of the file structure that your user does not have any access to, or where the standard user does not have write (or execute) access.
 
There are also some commands (like displaying mounted storage) that are not available to a standard user. Here are 3 system commands that in terminal mode will only ever work with this prefix (although if you have installed the version of the Raspberry Pi Operating System that supports a graphical user interface you can also select these actions from a menu):
*'''sudo halt''' = stops any cpu functions, but leaves Pi running; used when you have reached the end of commands you want to do for now
*'''sudo poweroff''' = makes pi do a tidy shutdown and turn off its power; used when you will not be using your Pi for a while
*'''sudo reboot''' (or "sudo reboot -verbose" for diagnostic output during shutdown and reboot) = makes your Pi close down and then reboot; used when you change settings, and after you install new software, to ensure Pi starts with all applications running using the latest settings and latest already installed software
 
=== ~ and / ===
 
The tilde symbol '''~''' denotes the home directory for the current user. Sub-directories within the current user's folder can be identified by '''~/documents''' or similar notation.
 
To reference a folder in root or any other area, the prefix is always '''/'''.
 
If you are using the RPi OS GUI, it provides a file manager that displays folders and files, and if you have a mouse you can click on an object to see what actions are available. The file manager has "Home" and "Root" as bookmarks by default, you can bookmark others. Typically, any new partitions created can also be accessed from bookmarks. Depending on options you select, there may be icons on the GUI desktop to link to particular folders and clicking on these offers various options including opening them in file manager.
 
In a terminal environment, to see what files and folders are in the current directory, type <code>dir</code> for just names or <code>ls</code> for details.
 
 
 
=== folder commands ===
 
To make a new folder in the current directory, type <code>sudo mkdir folder_name</code>.
 
To remove a folder, that has no files in it, type in a particular path, type <code>sudo rmdir /path/directory</code>.
 
To remove a folder that does have files, and/or sub-folders within it, type tt>sudo rm -r /path/directory</code>, but remember the contents are gone for ever, so be absolutely sure you have specified the right folder!
 
To copy folders/files from one directory to another use something like <code>cp -R --update --preserve /home/pi/CumulusMX/backup/daily /media/pi/data/CumulusMX/archive</code>
 
Sometimes, you have a folder or file in just one place in the file system, but want to be able to access it at a different place (because something expects it in the second place), the syntax is <code>ln -s /path/elsewhere path/pointer_location</code>.
 
An example might be '''ln -s /var/lib/phpliteadmin/diary.db ~/CumulusMX/data/diary.db''' (phplite admin can only update databases in one folder /var/lib/phpliteadmin, or in older releases in /usr/share/phpliteadmin; while MX expects the file to be in its data folder but is happy with a logical pointer to another folder).
 
=== chmod ===
 
When you are attempting any of the actions listed in this article that involve reading, creating, editing, exeduting, or moving, files; you might see an error message generally because of a lack of write (or execute) permissions on an existing file or folder. Whilst <code>rm filename</code> will remove a file even if it is write protected, for nano you need to change the file permissions with <code>sudo chmod -R ugo+rw ~/CumulusMX</code> for modify access to all files in your Cumulus installation (see the syntax below if you want to restrict access).
 
 
*'''chmod''' command to modify permissions
* the '''-R''' indicates recursive action (i.e. including not just the named folder, but all files within it and all sub-folders, and all files within sub-folders)
*letters indicating whose permission is being modified
** '''u''' = Owning user (sometimes the owner is the user root, sometimes the owner is the user Pi, for our web pages later we change ownership)
** '''g''' = Group (by default the owning user is also a group, but a group can be defined if you want to give multiple users (with different passwords) the same rights of access)
** '''o''' = Other users (write permission here is needed if for example you are using FTP to move a file from a PC to your Pi, or vice versa)
* sign for add or remove permissions
* '''+''' = add permission
* '''-''' = remove permission
*letters indicating what permission is being changed
** '''r''' = read [4]
** '''w''' = write [2]
** '''x''' = execute [1]
 
Note that as an alternative shorter syntax you can use numbers e.g. '''666''' is equivalent to '''ugo+rw'''. The first digit in the number relates to ''u'', the second to ''g'' and the last to ''o''. The values in [] brackets in list of permissions above are added to derive each digit. So if you are reading the Cumulus support forum and you see a reference to permissions which includes a string of 3 digits, now you can understand what is meant.
 
=== editing files ===
 
*Do remember that file names are case sensitive.
*If you use the wrong case in a path/file name, it will be treated as a different "new" file.
*If a file editor does not display content you were expecting, look in case "new file" message appears because you have made a typo in the path/file name.
 
There are various text editors available on a Pi,
*if you have a mouse and click on a file, you should see "text editor" listed, that loads '''Mousepad''' which has a menubar at the top of its "Windows" like interface.
*in terminal mode '''nano''' is a text editor that by default lists the actions available making it easier for a novice to use.
*in both the GUI and terminal mode, Geary is a programmer's editor with lots of useful funtionality
 
All editors can create a file when a file does not exist and edit (subject to file permissions) an existing file. Use prefix of 'sudo' to give you access to any file irrespective of ownership, '''sudo''' does not change the actual file permissions, so you might find you can read a file, but not save it after you have done your edit.
 
====nano====
 
The full syntax is <code>sudo nano -B Path_file_name</code> where the '''-B''' means it will create a backup of how the file was before (this can be enabled while in the editor by pressing the control key down and typing B). Alternatively use '''-C''' which stores each version in a back-up directory. If you want to edit from a particular line and column you can use '''+line.column''', and also optionally use '''-l''' (lower-case "L") to display line numbers which might be useful when trying to correct a problem with a log file like [[dayfile.txt]]. If you don't specify a file name, then nano will create a new file and you will need to specify where to save it before exit.
 
*Be aware that what quoted above applies from MX 3.16.0 (b.3182, 30 Apr 2022) onwards, earlier releases did not include the "-f" flag in final line quoted above.
After typing the nano command you need to specify a filename (it might include a path, see earlier sub-section for use of '''/''' and '''~''') and there are examples later in this article, but if you decide to ''host a web site on your Pi'' then you might want to edit its home page with (.html or .php) name like <code>sudo nano /var/www/html/index.php</code>.
 
:There is more in the file, but for now focus on the line including "ExecStart=/usr/bin/mono-service -d:". Don't change any of the bit I just quoted.
After you have made an alteration to the current contents of the file, various options are shown at the bottom. Here are two key ones:
*First is '''^O''' which is used to save the file whilst staying in the editor, to do this press the control key down and type O. Next it shows the current file name, if you press '''Enter''' then that file will be overwritten.
**it allows you to type over the file name shown. If you choose to save as another file, you will be asked if the new name is correct (type '''Y''' to continue saving).
*Another is '''^X''' which means if you press the control key down and type X you get the exit dialogue. If you have not made any edits, or have already saved the file, this just exits the editor. If you have not used control and O to save the file, it asks whether you want to save the edited file (type '''Y'''), typing just the Y key lets save continue (any other key stroke exits without saving), then it shows the current file name, if you press '''Enter''' then that file will be overwritten.
 
Almost certainly you will need to change "/home/install/CumulusMX" on that line. Replace that with "CHOSEN PATH/CumulusMX", i.e. the full path to the directory that the executables are being stored in.
You might find it useful to type <code>sudo nano /etc/nanorc</code> as this puts you into the configuration file for nano where you can set back-up, line-numbering, and other options.
 
The final line, with all possible parameters, could read: <code>'ExecStart=/usr/bin/mono-service -d:CHOSEN PATH/CumulusMX CumulusMX.exe -service -debug -port 999 - lang el-GR</code>
====Geany====
* Note the space between the path (just looked at) and the executable file,
* Note the mandatory parameter "-service" that follows a space after the "CumulusMX.exe", you must leave that untouched,
* Note you can remove/keep the rest of the line after the -service i.e. the other parameters (some with their values) -lang, -port, or -debug, (as defined in table earlier), are all optional.
 
This uses a GUI, you can set preferences and do all other actions using either menu selections (use mouse or keyboard) or control sequences (on keyboard). Once it knows what type of programming language, it can colour up the code; it can show you how many times variable identifiers are used; it can match opening and closing quotes, tags, and brackets; and it can ensure encoding and line terminators are correct.
 
Technical user may do other edits on the file, these will be described later, for now save the changed file under a new name (so it won't be lost when you do a MX upgrade that replaces original file) within your MX installation:
Line-numbering is an option, so it can be used to edit MX log files, and (as BOM is an encoding option) you can be sure it won't add unwanted encoding.
# Open the "File" menu, and select "Save as" and enter a new name '''cumulusmx_edited.service'''
# Exit out of the editor you are using
# Next, open a terminal session
# Now copy file to where it is needed to run the service <code>sudo cp EXISTING_PATH/CumulusMX/MXutils/linux/cumulusmx_edited.service /etc/systemd/system/cumulusmx.service</code>
# Now type <code>sudo systemctl daemon-reload</code>, this tells "systemd" that it needs to reload all service definitions because either one has changed, or a new one has been added
# Finally, '''optionally''', create a symbolic link to that file using <code>sudo systemctl enable cumulusmx</code> if you want the service to automatically start after a reboot
 
== removing an unwanted file ==
 
====Technical users - additional edits====
You can remove a file with various commands, including <code>sudo rm filename</code>.
 
Novice users, skip this subsection. ''The changes in this subsection have to be made with other changes that are not covered here'' (they depend on your weather station type, and your computer type, so are not appropriate to a Wiki page trying to generalise, and anyway your contributor is not a technical expert).
 
:Look at the '''[Service]''' part of the file quoted above.
=== external storage ===
 
This states Cumulus should use root for both the user it runs under and for the group permissions it uses. ''If you have the technical expertise'', you might choose to run MX in a different user, if your weather station type allows MX to run in a different user. If so, replace the "root" in its two locations. (Please note some weather stations require other changes outside this file before Cumulus can make contact, one example is discussed [https://cumulus.hosiene.co.uk/viewtopic.php?t=20413 on support forum here], but there are other topics that may be relevant).
Generally, if you attach USB storage (a disc or a stick), Linux OS distributions will detect any existing partitions (yes a technical term) and allow you to read files stored in them. This applies whether the partition is formatted for Linux or for Microsoft Windows.
 
You may also wish to add an extra line after the "Group" line <code>ExecStartPre=/bin/sleep 5</code>, this [https://cumulus.hosiene.co.uk/viewtopic.php?p=163754#p163754 is to delay the starting of MX by 5 seconds while other services start] (on a reboot of your computer) that might affect MX. (For some users, change 5 into 10, it all depends what else is being started).
However, you may have a brand new, unformatted, drive, or you may want to delete, or add partitions, or to format them as Linux partitions (as these make the input/output significantly more efficient).
 
:Look at the rest of the file, the '''[Unit]''' part.
You can install software that uses a GUI to make this easy, e.g. '''gparted''' [https://gparted.org/ partition editor].
 
For releases 3.8.4 to 3.15.0: you will see one reference to '''network-online.target''' in <code>After=network-online.target</code>.
 
For release 3.15.1 build 3170 (19 March 2022) onwards: you will see an extra line <code>Wants=network-online.target</code>
Alternatively, you can use a terminal session, and lots of commands:
#connect your external storage
#type '''su''' to gain administrative access
#enter your RPi password
#type '''fdisk -l''' (this is only available to root user) to see names for all storage your Linux computer can see
#an external drive will be named something like ''/dev/sd''''a''''' although that "a" might be "b" or a subsequent letter in alphabet depending on what has already been assigned
# if "sda" and "sdb" appear, or any others up to "sdz", the last one will relate to the most recently connected storage
#if your drive has partitions, then you will see further entries like '''/dev/sda1''' and ''/dev/sda2''.
#type '''df''' to see whether your drive is currently mounted (being used by computer system)
#if it is mounted, the command to use next is (type this accurately, there is a temptation to type an English word that adds an extra "n"!) <code>umount /dev/sda</code>, obviously replace the "a" by the appropriate letter seen in the earlier command
#if the drive does not have a partition, create one using <code>fdisk /dev/sda</code>, again changing the "a" into whatever letter was seen in response to the first "fdisk" command
#*"fdisk" is a utility, it will wait for further instructions, follow each with pressing "Enter"
#*type '''n''' as instruction to create a new partition
#*type '''p''' to make this the primary partition on this drive
#* type '''1''' to make this the first partition
#*accept default offered for first cylinder
#*accept default offered for last cylinder, if this is only partition, as that ensures the whole disk (apart from partition table) is available for your data
#*for simplicity, this guidance will not cover the possibility of multiple partitions
#*type '''t''' to say you are specifying the way you want this partition to be specified in partition table
#*optionally type '''L''' to see what file system types are available for the partition table
#*to select a "Linux" partition, type '''83'''
#*type '''w''' to create the partition you have now specified for Linux.
#Now we have a partition table and a partition on our drive, we can repeat '''fdisk -l''' to see the entry now added, it might be '''/dev/sda1''', where again the "a" might be a different letter
#To format this partition for Linux, we specify "ext4" as the way to format it using <code>mkfs.ext4 /dev/sda1</code>, again replacing the "a" as required.
#we need to create a folder within
#*"/media" for Linux in general
#*"/media/pi" for Raspberry PI OS
# As we will learn later, the relevant command (in RPi OS) is '''mkdir /media/pi/my_short_name''', where "my_short_name" is selected by you
#To mount our partition, we type <code>mount /dev/sda1 /media/pi/my_short_name</code>, where "sda1" is replaced by "sdb1" or whatever we saw in '''fdisk -l''', and "pi/my_short_name" is replaced by whatever we used in our make directory command.
#To (optionally) get our partition mounted at boot, we can use an editor (see later) to change the boot instructions, by typing <code>nano /etx/fstab</code>
#*In the editor, use the down arrow on your keyboard to move to last line, and then type '''/dev/sda1''' (change the "a" as necessary), then press "tab", then type '''/media/pi/my_short_name''' (change "pi/my_short_name" to whatever we used in our make directory command), then press "tab", then type '''ext4''' (again matching the format type we selected earlier), then press "tab", then type '''defaults''', then press "tab", then type '''1''', then press "tab", then finally type '''2'''
#*save the file (as described later in nano sub-section), hold down control key and press '''o'' letter key. Press "enter" again to confirm same file name.
#* exit nano by holding control key and pressing "x" key.
 
If you are a technical user, you might decide to edit the [Unit] part of the file, you have to decide what is needed in your context, only you know what other services are started by systemd on your computer, you can list all items using something like <code>systemctl list-unit-files</code> to see the services, but you still need to understand what each does.
 
If your computer has online access, then it can look up the correct time online and adjust its clock. However, it might not even try to do that for say 10 minutes after being booted, and so there may be a benefit in making MX wait until after systemd has asked for the time to be synced, and asked that the local file-system is made ready so MX can read/update/store files. To achieve this, you might choose to add a blank line after '''<nowiki>Documentation=https://cumuluswiki.org/a/Main_Page</nowiki>''' and in that blank line, type <code>Requires= time-sync.target local-fs.target</code>. Using "Requires" ensures these requesting events have happened before MX can start, if they fail, MX will not be started, this example has not specified a time that MX should wait for the other services to start!
== Package Manager – a brief technical aside==
 
For that ''time-sync.target'' to work, you need to '''enable''', by creating the symbolic links needed, the appropriate services outside this edit:
Linux operating systems install software by looking in repositories, and checking a register showing dependencies. When you ask Linux to install a particular package using “apt”, it also checks if all dependencies of the selected package are already present, and installs any that are missing.
<pre>sudo systemctl enable --now systemd-timesyncd.service
sudo systemctl enable --now systemd-time-wait-sync.service
</pre>
 
If you look up on-line how to install any software in Linux, it may use “apt-get”, that is an earlier package manager, in general you can use “apt” instead now.
 
Here is a quick explanation of all entries in this UNIT section:
The full differences between “apt” and “apt-get” depends on your Linux flavour, so this technical aside now splits further discussion by Linux flavour.
# Entries
#* The terminology "After" tells "systemd" that what is named can be started after MX, in this case it does not guarantee that the network service (to send data to a remote web server) will be started
#* The terminology "Wants" tells "systemd" that what is named is wanted now, i.e. try to start before MX, but still start MX even if the starting of the network service fails.
#* The terminology ''Requires'' tells "systemd" that the "cumulusmx" service should not be started until the services specified on that line have successfully started
#*# The '''local-fs.target''' specifies that the ''cumulusmx'' service requires the file service to have started, i.e. checks your computer can read files before it attempts to start the ''cumulusmx'' service
#*# The '''time-sync.target''' specifies that the ''cumulusmx'' service requires the computer to have synced with some time source (see notes below), which could be useful if your weather station type does not time-stamp readings stored in the console, and you want to ensure MX reads correct time from your computer
 
''Don't forget to save the file under a new name, and copy it as instructed in previous subsection.''
===Debian as used by Raspberry Pi===
 
====Technical Notes only relevant to Raspberry Pi====
“Debian Linux” (and its derivatives such as “Raspberry Pi Operating System”) uses “apt” to mean a ‘’’Package Manager’’’ that can install, update, and remove packages from these computer systems.
 
This Wiki page has tried to avoid being too specific to particular hardware, but to avoid misunderstanding the last subsection, a little does need to be said to justify the claim that only technical users, who understand all the other changes needed, should make changes mentioned there.
For Debian Linux, “apt” is directed at the end-user (it has user friendly features like a staus bar showing progress on a long install or long upgrade, and can produce prompts about what it is doing and can give choices about whether to do individual actions).
 
A standard Raspberry Pi computer does not include a clock chip. Instead one of the packages it loads as a service on booting is called "fake-hwclock", and that sets the clock to what the date/time was when it was last running, irrespective of how many days/hours it has been off. That counts as a time sync for the purposes of instruction specified above. You can buy and fit a real-time clock chip, and configure your computer to use that, but even that RTC will only keep time when it is kept powered, and even then it will drift off unless periodically able to be corrected by a time from internet.
There is an alternative “apt-get” which is more powerful, but directed at system level users (those who don’t want to be watching progress and possibly responding to prompts).
 
The issue is your Cumulus MX on restarting will skip the catch-up of historic data (should your weather station settings make that available), because the dummy clock makes MX think the computer was not off for long. Subsequent measurements will then get logged against the wrong time until the correct time is found on the internet (NTP). At that moment, the time will suddenly jump, this is serious if this means the "rollover" time has been skipped over, as it implies the "dayfile.txt" will miss a line, and many measurements will be logged to wrong day. In my experience it can be anything from 2 minutes to 10 minutes after switch on before my RPi does a time sync over the internet.
As “apt-get” is updated less frequently than “apt”, it may be it will not work with new packages. Put another way “apt-get” may never change what it can do, but “apt” may get modified to do more than it did before.
 
You might expect <code>sudo systemctl disable fake-hwclock.service</code> (or remove the service, and modify the scripts that call it) could ensure the computer (if online) has to get a time found on the internet (NTP). Nothing is as simple as it might seem!
===Ubuntu===
 
===Commands to do actions on a service===
For Ubuntu only “apt-get” was available up to 2014, when “apt” was added. Both work as described above for Debian. Again “apt” is best to use.
 
You will need to start (or restart) MX after you have defined (or redefined) the service as instructed above. The specific commands to use with MX service are at [[Raspberry_Pi_Image#systemctl_commands|systemctl_commands]], here I simply repeat the basic commands that can be used with any service (status, enable, disable, start, stop, and restart).
===Mint===
 
Don't forget you may need to type <code>sudo systemctl daemon-reload</code> to tell "systemd" that it needs to reload all service definitions whenever either one has changed, or a new one has been added.
Linux Mint has a different variation. Its “apt” calls its “apt-get” and adds extra features. So both effectively do the same, but (as with previous flavours) “apt” is best to use.
 
In all these commands, '''just replace [service_name] with ''cumulusmx''''' (or enter the name of another service).
It is likely that other Linux variants will also vary how these alternative commands differ.
* <code>sudo systemctl status [service_name]</code>
** (displays whether named service has started, whether it has failed, whether it has stopped, also whether enabled, extra information will be added should status change)
** type the single character "q" to quit updating status display and return to prompt
* <code>sudo systemctl enable [service_name]</code>
** (typed just once, and service named will automatically start when your Linux computer is booted)
** the confirmation message says a link has been created
* <code>sudo systemctl disable [service_name]</code>
** (used when you don't want an automatic restart of the named service)
* <code>sudo systemctl start [service_name]</code>
** (will start the named service)
* <code>sudo systemctl stop [service_name]</code>
** (will stop the named service)
** Closing MX with "cumulusmx" as the named service this way does a proper shutdown
* <code>sudo systemctl restart [service_name]</code>
** (issues a stop, then start, command to named service)
** You can upgrade MX by installing new files over the existing ones, while MX is left running, and then use this command to pick up new release with minimum downtime.